PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 200150, 200155 and 200157 Accelerometers
- 200152-XX-XX-XX MOD：323357-10-03-10
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
200152 interface-cable family reference
The Bently Nevada 200152 family is documented as a standard accelerometer interface cable with a connector at the accelerometer end. The requested identifier 200152-XX-XX-XX MOD：323357-10-03-10 is retained here without assigning standard catalogue options to its unresolved configuration.
Use the standard-family description as context, not as a specification for this modified assembly. Match the complete product marking and modification reference to the applicable manufacturer documentation before selection. The standard cable ordering table alone does not establish the modified configuration.
Use the standard-family description as context, not as a specification for this modified assembly. Match the complete product marking and modification reference to the applicable manufacturer documentation before selection. The standard cable ordering table alone does not establish the modified configuration.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 200152-XX-XX-XX MOD：323357-10-03-10
These are documented Trendmaster and 20015x sensor/interface applications. The standard 200152 cable role is background only; the complete MOD assembly, termination, route and installed channel must be verified before use.
-
01 · COOLING SYSTEMS
Low-frequency monitoring of cooling-tower fans
Bently Nevada documents Trendmaster use on cooling-tower fans. In an engineered 200155 low-frequency channel, the applicable sensor-end connector cable arrangement carries the sensor connections. Confirm the MOD assembly and observe the sensor-specific cable-length limit. -
02 · PROCESS PUMPS
Online vibration monitoring of essential pumps
The manufacturer identifies process pumps as a Trendmaster application. A compatible 200152 interface cable links the selected accelerometer to its designated interface; it does not perform signal processing. This application background does not verify the custom MOD connections. -
03 · ROLLING-ELEMENT BEARINGS
Signal connections for bearing-envelope measurements
The official sensor table pairs 200157 with acceleration-enveloping monitoring for rolling-element bearings and certain cavitation effects. Use only the cable arrangement specified by the engineered channel; check the modified assembly against its controlled drawing before connection.
Technical specifications for 200152-XX-XX-XX MOD：323357-10-03-10
-
Product Model200152-XX-XX-XX MOD：323357-10-03-10
-
Product ParametersModified accelerometer interface cable
-
In stock1 unit
-
ManufacturerBently Nevada
View all additional
Alternative Names
200152 MOD 323357-10-03-10
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
200150, 200155 AND 200157 ACCELEROMETERS
Review the complete accelerometer interface cable identity
The standard 200152 family is an accelerometer interface cable described in datasheet 164986. Its standard ordering table is separate from the supplied XX and MOD identifier.
The manufacturer illustrates the standard arrangement with a connector at the accelerometer end only. This family description must not be treated as a verified termination specification for the modified assembly.
Confirm the actual assembly from its applicable manufacturer record before connection. No cable length, armor, pinout, bend radius or operating temperature is assigned to this MOD configuration.
Features:
- Separate family data from MOD specifications
- Match the actual assembly record
- Retain the full modification reference
The Bently Nevada 200152-XX-XX-XX MOD：323357-10-03-10 accelerometer interface cable requires configuration-specific verification before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Preserve 200152-XX-XX-XX MOD：323357-10-03-10 in full during replacement review. The standard 200152 ordering table does not identify this modification reference.
Do not select a standard cable solely because it shares the 200152 prefix. Obtain configuration-specific manufacturer evidence before determining interchangeability.
No exact-order hardware revision, lifecycle date or approved successor is stated here. A datasheet revision or the MOD sequence must not be presented as a confirmed hardware revision.
Features:
- Do not resolve XX fields by guessing
- Compare configuration-specific documentation
- Do not assume standard-cable interchangeability
The Bently Nevada 200152-XX-XX-XX MOD：323357-10-03-10 accelerometer interface cable requires replacement verification against the complete product identity and applicable manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The existing links are Amikon-hosted reference packages, not direct manufacturer downloads. Standard-family dimensions, bend radius, temperature and wiring information in these files are not verified for MOD 323357-10-03-10. Do not use them as configuration-specific installation instructions without matching manufacturer evidence.
Features:
- Existing reference PDFs retained; MOD applicability not confirmed
- Use configuration-specific manufacturer documentation
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 200152-XX-XX-XX MOD：323357-10-03-10 accelerometer interface cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200152-XX-XX-XX MOD：323357-10-03-10
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the standard 200152 cable arrangement?
Datasheet 164986 describes an accelerometer interface cable with a connector at the accelerometer end only. This standard arrangement does not certify the termination of MOD 323357-10-03-10. -
Is the MOD identifier a reliable cable-length code?
The reviewed standard ordering table does not decode 323357-10-03-10. Keep the complete MOD identification and confirm the assembly drawing; do not assign a length from the digits. -
Which bend radius belongs to standard 200152?
The manufacturer gives 73.7 mm (2.9 in) for standard 200152. The 63.5 mm value belongs to 200151. Confirm whether the controlled MOD drawing imposes different requirements. -
May the standard cable be flexed below minus 20 degrees C?
No. The manufacturer warns that flexing or bending below -20 degrees C may damage the cable. Lower-temperature use is conditional on preventing that movement; follow the actual assembly limits. -
Does choosing this cable select the monitoring function?
No. Standard velocity, low-frequency velocity and acceleration-enveloping functions use different sensor/interface arrangements. Match the actual sensor, ProTIM or other approved interface and the custom cable wiring. -
Is 25 m valid with every sensor in the family?
No. The source specifically limits 200155 cable length to 15.24 m. The general 25 m cable statement does not override that restriction or establish the length of this MOD assembly.
READY TO VERIFY YOUR PART?
Get a 200152-XX-XX-XX MOD：323357-10-03-10 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
200152-XX-XX-XX MOD：323357-10-03-10Modified accelerometer interface cableManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
