PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Low-frequency measurement with the option 02 mounting stud
Bently Nevada 200155-02-CN is a low-frequency accelerometer for the documented acceleration-to-velocity monitoring channel. This order includes a 3/8-24 to 3/8-24 UNF mounting stud with a hexagonal plate, providing a defined mechanical interface for suitable bearing-housing or casing measurement points.
The 200155 variant is recommended when vibration frequencies of interest fall below 10 Hz, including fin-fan and slowly rotating machinery applications. Match the low-frequency interface, allow the specified settling time and keep the connected cable within 15.24 metres; other channel types are not equivalent.
The 200155 variant is recommended when vibration frequencies of interest fall below 10 Hz, including fin-fan and slowly rotating machinery applications. Match the low-frequency interface, allow the specified settling time and keep the connected cable within 15.24 metres; other channel types are not equivalent.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 200155-02-CN
These contexts are supported by the applicable manufacturer series documentation. They do not establish installation of this exact order in a named customer project.
-
01 · FIN-FAN MONITORING
Low-frequency fan vibration measurements
The manufacturer identifies fin-fan machinery as a low-frequency application. This accelerometer senses casing or bearing-housing acceleration for the matching low-frequency acceleration-to-velocity channel; verify the mount and the complete measurement path. -
02 · SLOW ROTATING MACHINERY
Low-frequency measurements on slow shafts
Use the 200155 family where the vibration frequencies of interest are below 10 Hz and suitable casing measurements represent the machine condition. The accelerometer measures motion at its mounting point, not non-contact shaft displacement. -
03 · CONDITION MONITORING
Low-frequency channels in connected monitoring systems
The official settling-time guidance identifies low-frequency acceleration-to-velocity channel types on ProTIM, DSM or System 1 systems. Check the installed hardware and channel settings; this series guidance does not establish compatibility with every system input.
Technical specifications for 200155-02-CN
-
Product Model200155-02-CN
-
Product ParametersLow-frequency vibration accelerometer
-
In stock1 unit
-
ManufacturerBently Nevada
-
Sensitivity100 mV/g, +/-12% at 80 Hz
-
Acceleration range+/-20 g
-
Sensor frequency response2.0 to 10,000 Hz, +/-10% referenced to 80 Hz
-
Settling time<=2000 ms, within 5% of bias
-
Excitation voltage4.7 to 5.5 V DC
-
Quiescent current<800 microamperes
-
Sensor operating temperature-40 to +105 degrees C
-
Sensor mounting thread3/8-24 female
-
Mounting accessory3/8-24 to 3/8-24 UNF mounting stud with 1-3/8-inch hex plate
-
Electrical connectorTop-mounted 5-pin, 1/2-20
-
Housing material316L stainless steel
-
Sensor mounting torque2.7 to 6.8 N m; stud torque is separate
-
Output polarityAcceleration from base toward connector: SIG+ positive relative to SIG-
-
Output bias+2.5 +/-0.23 V DC
-
Maximum interface cable length15.24 m
View all additional
Alternative Names
200155-02-CN vibration accelerometer
Trendmaster low-frequency acceleration sensor 200155-02-CN
20015x low-frequency sensor with option 02 stud
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
200150, 200155 AND 200157 ACCELEROMETERS
Integrate the complete accelerometer configuration
200155-02-CN is a low-frequency acceleration sensor. Use it only with the documented monitoring interface and channel configuration; the sensor is not a standalone 4-20 mA transmitter.
The maximum connected cable length for this variant is 15.24 m. Verify the five-pin connection and specified 4.7 to 5.5 V DC excitation, rather than assuming compatibility from a similar connector.
Option 02 provides the specified 3/8-24 mounting stud and plate. Verify the casing vibration path, mounting accessory and supplied approval marking before commissioning.
Features:
- Use the documented low-frequency channel
- 15.24 m model-specific cable limit
- Verify mounting and supplied approval marking
The Bently Nevada 200155-02-CN accelerometer requires the associated hardware, mounting and measurement configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 200155-02-CN order, including the sensor variant, mounting option and approval requirement. An installation accessory is not a replacement sensor model.
200150, 200155 and 200157 serve different monitoring functions. The manufacturer warns that unsuitable monitor or TIM combinations can result in erroneous readings or faults; matching connectors alone is insufficient.
The reviewed official sources do not establish an exact-order hardware revision, discontinuation date or approved successor. Verify current manufacturer guidance for the installed measurement system before substituting another variant.
Features:
- Match the sensor variant and mounting option
- Check the complete monitoring channel
- Do not infer an approved successor from family similarity
The Bently Nevada 200155-02-CN accelerometer requires replacement verification against the complete installed configuration and applicable manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Existing product PDF references retained; document review remains required
- Match manufacturer document scope to the complete order and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 200155-02-CN accelerometer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200155-02-CN
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Why choose 200155-02-CN for slow machinery?
The manufacturer recommends 200155 when frequencies of interest are below 10 Hz and identifies fin-fan and slow-shaft measurements as low-frequency applications. The monitoring channel must support this sensor variant. -
Can it be connected to a 1900 monitor?
The manufacturer warns against using 200155 and 200157 with 1900 monitors or other unsuitable TIMs. Such combinations may give incorrect readings or cause the monitor to fail. -
How long may the interface cable be?
The maximum allowed cable length for 200155 is 15.24 m. Do not use the 25 m general cable value without the model-specific restriction. -
What settling time must the measurement system allow?
The specified settling time is no more than 2000 ms to reach within 5 percent of output bias. This longer settling time requires the documented low-frequency acceleration-to-velocity channel type. -
Is an installation stud included with this order?
Yes. Option 02 selects a 3/8-24 to 3/8-24 UNF stud with a 1-3/8-inch hex plate. This is distinct from the no-stud option 00. -
Does the 10 kHz sensor bandwidth mean every interface records 10 kHz?
No. The manufacturer notes attenuation above 1 kHz in the referenced 200200 and 200250 interfaces. The sensor frequency response must not be presented as the bandwidth of the entire installed monitoring chain. -
How tightly should the sensor body be mounted?
The specified accelerometer mounting torque is 2.7 to 6.8 N m. Stud installation has separate requirements; do not apply the stud torque limit to the sensor body.
READY TO VERIFY YOUR PART?
Get a 200155-02-CN quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
