PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
General-purpose monitoring with the option 02 mounting stud
Bently Nevada 200150-02-CN is a general-purpose, case-mounted accelerometer for compatible Trendmaster monitoring interfaces. Its piezoelectric sensing element produces a differential voltage proportional to acceleration, while the ordered mounting option includes a 3/8-24 to 3/8-24 UNF stud with a hexagonal mounting plate.
Use the documented standard acceleration-to-velocity interface and verify the vibration transmission path at the bearing housing or machine casing. The maximum interface cable length for this sensor is 25 metres. Sensor torque, stud torque and hazardous-area approval requirements must be checked separately.
Use the documented standard acceleration-to-velocity interface and verify the vibration transmission path at the bearing housing or machine casing. The maximum interface cable length for this sensor is 25 metres. Sensor torque, stud torque and hazardous-area approval requirements must be checked separately.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 200150-02-CN
These contexts are supported by the applicable manufacturer series documentation. They do not establish installation of this exact order in a named customer project.
-
01 · BEARING HOUSINGS
General-purpose bearing-housing vibration measurement
This accelerometer senses vibration transmitted through a suitable bearing housing. In the documented standard ProTIM acceleration-to-velocity application, the interface processes the acceleration signal; correct mounting is necessary for representative machinery readings. -
02 · PLANT MONITORING
Maintaining Trendmaster 2000 measurement points
The 200150 is explicitly supported in the documented Trendmaster 2000 arrangements. The sensor supplies the acceleration signal to the applicable flexiTIM or TIM; verify the installed module, cable and mounting before restoring a monitoring point. -
03 · DEDICATED MACHINERY MONITORS
Acceleration input for documented 1900-series arrangements
The manufacturer identifies 200150 compatibility with 1900/25 and 1900/27 monitors. Apply the documented connection and measurement configuration; this statement does not extend to the low-frequency 200155 or enveloping 200157 variants.
Technical specifications for 200150-02-CN
-
Product Model200150-02-CN
-
Product ParametersGeneral-purpose vibration accelerometer
-
In stock1 unit
-
ManufacturerBently Nevada
-
Sensitivity100 mV/g, +/-12% at 80 Hz
-
Acceleration range+/-25 g
-
Sensor frequency response10 to 1,000 Hz, +/-10% referenced to 80 Hz
-
Settling time<=300 ms, within 5% of bias
-
Excitation voltage4.7 to 5.5 V DC
-
Quiescent current<800 microamperes
-
Sensor operating temperature-40 to +105 degrees C
-
Sensor mounting thread3/8-24 female
-
Mounting accessory3/8-24 to 3/8-24 UNF mounting stud with 1-3/8-inch hex plate
-
Electrical connectorTop-mounted 5-pin, 1/2-20
-
Housing material316L stainless steel
-
Sensor mounting torque2.7 to 6.8 N m; stud torque is separate
-
Output polarityAcceleration from base toward connector: SIG+ positive relative to SIG-
-
Output bias+2.5 +/-0.23 V DC
-
Maximum interface cable length25 m
View all additional
Alternative Names
200150-02-CN vibration accelerometer
Trendmaster general-purpose acceleration sensor 200150-02-CN
20015x general-purpose sensor with option 02 stud
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
200150, 200155 AND 200157 ACCELEROMETERS
Integrate the complete accelerometer configuration
200150-02-CN is a general-purpose acceleration sensor. Use it only with the documented monitoring interface and channel configuration; the sensor is not a standalone 4-20 mA transmitter.
The maximum connected cable length for this variant is 25 m. Verify the five-pin connection and specified 4.7 to 5.5 V DC excitation, rather than assuming compatibility from a similar connector.
Option 02 provides the specified 3/8-24 mounting stud and plate. Verify the casing vibration path, mounting accessory and supplied approval marking before commissioning.
Features:
- Use the documented general-purpose channel
- 25 m model-specific cable limit
- Verify mounting and supplied approval marking
The Bently Nevada 200150-02-CN accelerometer requires the associated hardware, mounting and measurement configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 200150-02-CN order, including the sensor variant, mounting option and approval requirement. An installation accessory is not a replacement sensor model.
200150, 200155 and 200157 serve different monitoring functions. The manufacturer warns that unsuitable monitor or TIM combinations can result in erroneous readings or faults; matching connectors alone is insufficient.
The reviewed official sources do not establish an exact-order hardware revision, discontinuation date or approved successor. Verify current manufacturer guidance for the installed measurement system before substituting another variant.
Features:
- Match the sensor variant and mounting option
- Check the complete monitoring channel
- Do not infer an approved successor from family similarity
The Bently Nevada 200150-02-CN accelerometer requires replacement verification against the complete installed configuration and applicable manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation. The existing Data Sheet and Installation Instructions incorrectly state a 15.24 m cable limit. The official 200150 limit is 25 m; corrected PDFs are pending review.
Features:
- Existing product PDF references retained; document review remains required
- Match manufacturer document scope to the complete order and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 200150-02-CN accelerometer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200150-02-CN
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is the maximum cable length 15.24 metres for 200150-02-CN?
No. Datasheet 164986 gives 25 m for 200150. The 15.24 m restriction applies specifically to 200155; it must not be transferred to this general-purpose variant. -
Which mounting stud is included with option 02?
Option 02 identifies a 3/8-24 to 3/8-24 UNF stud with a 1-3/8-inch hex plate. Check the mounting surface and use the separate manufacturer instructions for stud and sensor tightening. -
Can this sensor operate with Trendmaster 2000?
The manufacturer explicitly lists 200150 for Trendmaster 2000, including the 200100 dual acceleration-to-velocity flexiTIM and 89130-01 TIM. Confirm the installed interface and wiring before connection. -
What supply voltage does the accelerometer require?
The specified excitation is 4.7 to 5.5 V DC, with quiescent current below 800 microamperes. It is not a directly interchangeable 24 V industrial transmitter. -
Where should a casing-vibration sensor be mounted?
Select a bearing-housing or casing point with a suitable vibration transmission path. Poor positioning or mounting can attenuate or amplify the signal and prevent representative machinery measurements. -
Can a low-frequency 200155 replace this sensor without changes?
Do not assume direct substitution. The variants require different acceleration-to-velocity channel configurations, and inappropriate substitution can cause erroneous readings or monitor faults. -
Does CN specify where the sensor was manufactured?
No. CN is a country-specific approval option listed in the manufacturer approvals guide. It is not a country-of-manufacture code; check the supplied label and applicable approval documentation.
READY TO VERIFY YOUR PART?
Get a 200150-02-CN quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
