PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 26530-12-10-03-018-085-24-03-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Dual probe transducer assembly
Bently Nevada 26530-12-10-03-018-085-24-03-00 is a dual-probe transducer assembly. The dual-probe assembly combines a proximity probe and Velomitor transducer at approximately the same location. It supports relative shaft measurements, absolute casing vibration and the documented combined shaft-motion measurement. The housing should be mounted on a surface mechanically referenced to the bearing.
This order selects a 3300 XL eight-millimetre probe with a one-metre lead, a three-quarter-inch NPT adapter and a Velomitor sensor. The adapter is 1.8 inches long and probe penetration is 8.5 inches. The selected fittings are included; the optional support and oil seal are not requested.
This order selects a 3300 XL eight-millimetre probe with a one-metre lead, a three-quarter-inch NPT adapter and a Velomitor sensor. The adapter is 1.8 inches long and probe penetration is 8.5 inches. The selected fittings are included; the optional support and oil seal are not requested.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 26530 Dual Probe transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · RELATIVE SHAFT MOTION
Radial position and vibration
The proximity probe measures shaft radial position and dynamic motion relative to its mounting location. Mechanical referencing of the housing to the bearing is important to the intended measurement. -
02 · ABSOLUTE CASING VIBRATION
Velocity measurement beside the probe
The Velomitor transducer measures the absolute vibration of the casing at approximately the same location. Its supported operating conditions remain distinct from those of the proximity probe. -
03 · SHAFT DIAGNOSTICS
Combined absolute motion and orbit analysis
The documented calculation combines relative displacement with integrated seismic motion. Complete orbit and shaft-centreline analysis requires two dual-probe assemblies in an X-Y arrangement per radial bearing.
Technical specifications for 26530-12-10-03-018-085-24-03-00
-
Product Model26530-12-10-03-018-085-24-03-00
-
Product ParametersDual probe transducer assembly
-
In stock9 units
-
ManufacturerBently Nevada
-
Proximity probe selection3300 XL 8 mm
-
Probe lead length1.0 m
-
Adapter thread3/4-14 NPT
-
Adapter length1.8 in
-
Probe penetration8.5 in
-
Velocity transducer selectionVelomitor sensor
-
Fittings selection3/4-14 NPT plug, 3/4-to-1/2-14 NPT reducer, cable seal grip and grommet
-
Probe support / oil sealNot requested
-
Probe temperature range-51 to +177 deg C; pressure seal risk below -34 deg C
-
Velomitor temperature range-55 to +121 deg C
-
Velocity measurement minimum frequency600 cpm
-
X-Y bearing diagnostic arrangementTwo Dual Probe assemblies per radial bearing
-
Mounting referenceBearing-referenced housing or cover
-
Measurement combinationRelative shaft displacement plus integrated seismic displacement for absolute motion
View all additional
Alternative Names
26530 12 10 03 018 085 24 03 00
26530-12-10-03-018-085-24-03-00 dual-probe transducer assembly
Bently Nevada 26530-12-10-03-018-085-24-03-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DUAL PROBE TRANSDUCER ASSEMBLY
Integrating 26530-12-10-03-018-085-24-03-00
The dual-probe assembly combines a proximity probe and Velomitor transducer at approximately the same location. It supports relative shaft measurements, absolute casing vibration and the documented combined shaft-motion measurement. The housing should be mounted on a surface mechanically referenced to the bearing.
Use the matched proximity system and velocity measurement chain. Absolute shaft motion requires the documented sum of relative displacement and seismic vibration integrated to displacement. Two assemblies in an X-Y arrangement are required for full orbit and shaft-centreline diagnostics at each radial bearing.
Mount on a bearing-referenced housing or cover and verify the adapter thread, penetration and clearances. The historical source warns that exposing the probe below -34 deg C may damage its pressure seal. Apply the separate temperature limits for the probe and Velomitor; do not treat them as one blanket rating.
Features:
- Match exact assembly, interface generation, connection and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 26530-12-10-03-018-085-24-03-00 dual-probe transducer assembly requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 26530-12-10-03-018-085-24-03-00 requires comparing exact assembly, interface generation, connection and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the matched proximity system and velocity measurement chain. Absolute shaft motion requires the documented sum of relative displacement and seismic vibration integrated to displacement. Two assemblies in an X-Y arrangement are required for full orbit and shaft-centreline diagnostics at each radial bearing.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 26530-12-10-03-018-085-24-03-00 dual-probe transducer assembly requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 26530-12-10-03-018-085-24-03-00 dual-probe transducer assembly must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26.2x11.8x9cm
-
Shipping weight1.74 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 26530-12-10-03-018-085-24-03-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 26530-12-10-03-018-085-24-03-00 identified?
This order selects a 3300 XL eight-millimetre probe with a one-metre lead, a three-quarter-inch NPT adapter and a Velomitor sensor. The adapter is 1.8 inches long and probe penetration is 8.5 inches. The selected fittings are included; the optional support and oil seal are not requested. -
What does this component do?
The dual-probe assembly combines a proximity probe and Velomitor transducer at approximately the same location. It supports relative shaft measurements, absolute casing vibration and the documented combined shaft-motion measurement. The housing should be mounted on a surface mechanically referenced to the bearing. -
Which equipment and interfaces must match?
Use the matched proximity system and velocity measurement chain. Absolute shaft motion requires the documented sum of relative displacement and seismic vibration integrated to displacement. Two assemblies in an X-Y arrangement are required for full orbit and shaft-centreline diagnostics at each radial bearing. -
Where is this product used?
The proximity probe measures shaft radial position and dynamic motion relative to its mounting location. Mechanical referencing of the housing to the bearing is important to the intended measurement. -
What matters when installing this component?
Mount on a bearing-referenced housing or cover and verify the adapter thread, penetration and clearances. The historical source warns that exposing the probe below -34 deg C may damage its pressure seal. Apply the separate temperature limits for the probe and Velomitor; do not treat them as one blanket rating. -
Is the optional probe support and oil seal included?
No. The final 00 selects no probe support or oil seal. The fitting option 03 is separate and supplies the stated plug, reducer and cable seal grip. -
Can one assembly provide complete X-Y orbit information?
No. The manufacturer requires two dual-probe assemblies in an X-Y configuration per radial bearing for complete orbit and shaft-centreline diagnostics.
READY TO VERIFY YOUR PART?
Get a 26530-12-10-03-018-085-24-03-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
26530-12-10-03-018-085-24-03-00Dual probe transducer assemblyManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
