PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 31000 and 32000 Proximity Probe Housing Assemblie
- 31000-30-05-15-049-01-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
External radial-probe access in a 3300 XL monitoring system
Bently Nevada 31000-30-05-15-049-01-02 is an English-thread proximity probe housing assembly with a reinforced PPS body. Its configuration includes a protected-connector 3300 XL 8 mm probe, a 0.5 m cable, a 1.5-inch standoff adapter and 4.9-inch nominal probe penetration.
The housing provides external probe access for compatible radial-vibration or Keyphasor installations without dismantling the machine. It uses a 3/4-14 NPT mounting connection, with one conduit fitting and two plugs; confirm mechanical clearances and the complete approved transducer arrangement because the housing is not explosion-proof.
The housing provides external probe access for compatible radial-vibration or Keyphasor installations without dismantling the machine. It uses a 3/4-14 NPT mounting connection, with one conduit fitting and two plugs; confirm mechanical clearances and the complete approved transducer arrangement because the housing is not explosion-proof.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 31000-30-05-15-049-01-02
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · RADIAL VIBRATION
Bearing-relative vibration monitoring through the machine case
The housing supports a radially mounted proximity probe and allows external adjustment. The manufacturer requires the machine casing to be affixed to the bearing for an accurate relative-vibration signal, so casing geometry and stiffness remain application checks. -
02 · KEYPHASOR REFERENCE
Externally accessible phase-reference pickups on rotating machinery
The 31000 family is used for radial Keyphasor pickups. Its probe access permits gap adjustment or replacement without machine dismantling, while the configured standoff and penetration must suit the actual target location. -
03 · INTRINSICALLY SAFE SYSTEM
Protected probe installations in approved hazardous-area monitoring loops
The housing can protect a probe within an approved intrinsically safe transducer installation using appropriate barriers. It supplies mechanical and environmental protection only, so the housing itself must not be represented as an explosion-proof enclosure.
Technical specifications for 31000-30-05-15-049-01-02
-
Product Model31000-30-05-15-049-01-02
-
Product ParametersPPS proximity probe housing
-
In stock1 unit
-
ManufacturerBently Nevada
-
Installed probe configuration3300 XL 8 mm with connector protector and multiple-approval option
-
Probe cable length0.5 m
-
Standoff adapter length1.5 in (38.1 mm)
-
Nominal probe penetration4.9 in (124.46 mm)
-
Conduit hardwareOne 3/4-14 NPT fitting and two plugs
-
Machine mounting thread3/4-14 NPT
-
Housing materialGlass-reinforced PPS with conductive fibers
-
Sleeve and retaining chainAISI 304 stainless steel
-
Outer sleeve and exterior screwsAISI 303 stainless steel
-
Housing O-ring materialNeoprene
-
Retaining-nut torque29.4 N m
-
Environmental enclosure ratingType 4X and IP66; not explosion-proof
-
Penetration adjustment range+/-0.5 in (13 mm)
-
External housing standardAPI 670 housing requirements
-
Housing pressure boundaryNot designed for internal or external pressure
View all additional
Alternative Names
31000 PPS external probe housing
4.9-inch penetration proximity housing assembly
3300 XL 8 mm Keyphasor mounting housing
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
31000 AND 32000 PROBE HOUSING ASSEMBLIES
External radial-probe access in a 3300 XL monitoring system
The 31000 housing supports through-case installation of a proximity probe, with external access for gap adjustment and replacement. This configuration includes a 3300 XL 8 mm probe with connector protection and the multiple-approval option.
Its 1.5-inch standoff and 4.9-inch penetration are separate ordered dimensions. The 0.5 m probe cable, NPT mounting connection and selected conduit hardware must be matched to the installed machine and electrical system.
For radial vibration, the manufacturer requires the machine casing to be affixed to the bearing. The housing can also support Keyphasor service, while dual axial-position probes are directed to the separate 21022 housing arrangement.
Features:
- External adjustment and service access
- Matched standoff, penetration and probe
- Radial vibration and Keyphasor system roles
The Bently Nevada 31000-30-05-15-049-01-02 probe housing assembly requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Retain the exact 31000 configuration when the installed mounting and probe system require it. Standoff, penetration, conduit fittings and the mounting thread are not interchangeable labels for a single sleeve dimension.
The PPS housing provides Type 4X and IP66 mechanical and environmental protection but is not an explosion-proof enclosure. Replacing a different housing family requires a review of the actual hazardous-area protection concept and approved transducer installation.
The reviewed material does not establish a discontinuation date or exact drop-in successor for this order code. A replacement housing or sleeve must be checked against the manufacturer drawings, installed dimensions and access needed for safe probe adjustment.
Features:
- Compare all six order-code groups
- Do not substitute explosion-proof claims
- Verify actual sleeve and mounting dimensions
The Bently Nevada 31000-30-05-15-049-01-02 probe housing assembly requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 31000-30-05-15-049-01-02 probe housing assembly must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 31000-30-05-15-049-01-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is this 31000 housing made from aluminum?
No. Its housing material is reinforced polyphenylene sulfide thermoplastic containing conductive fibers. The sleeve, outer sleeve and associated hardware use the stainless steel grades identified in the datasheet. -
Does 049 mean 49 mm of probe penetration?
No. The English 31000 order code uses tenths of an inch, so 049 means 4.9 inches, equivalent to 124.46 mm. It is separate from the 1.5-inch standoff option. -
Does probe option 30 include a connector protector?
Yes. In the 31000 ordering table, option 30 specifies a 3300 XL 8 mm probe with a connector protector and the multiple-approval option. This meaning must not be borrowed from the different 21000 option table. -
Can the probe gap be adjusted without opening the machine?
External access is a stated purpose of the 31000/32000 housing. It permits gap adjustment and probe replacement without machine disassembly, subject to the installed access and safe maintenance conditions. -
Is Type 4X and IP66 protection the same as explosion-proof protection?
No. The datasheet explicitly states that 31000/32000 housings are not explosion-proof. Hazardous-area use requires the appropriate approved transducer arrangement and intrinsically safe barriers. -
Can it be used for two axial-position probes?
The manufacturer directs dual-probe shaft axial-position applications to housing 21022. The 31000/32000 description instead emphasizes radially mounted vibration and Keyphasor transducers. -
What retaining-nut torque is specified for the housing?
The stated retaining-nut torque is 29.4 N m. This is a mechanical housing value and must not be used as the coaxial connector tightening torque.
READY TO VERIFY YOUR PART?
Get a 31000-30-05-15-049-01-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
