PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 Ceramic Capped Probe
- 146054-08-05-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Ceramic tipped proximity probe
Bently Nevada 146054-08-05-02-05 is a ceramic proximity probe. The ceramic-tipped probe supports non-contact position and vibration measurement where its documented front-end chemical resistance is needed. Its rear end is not sealed, and the calibrated curve differs from a standard XL probe. Both environmental exposure and monitor configuration require careful review.
This order specifies a 0.8 in case, 0.5 m total probe length and standard ClickLoc connection without a protector. Approval option 05 must be checked against delivered markings. Verify the matched sensing chain and the shifted electrical range before replacement.
This order specifies a 0.8 in case, 0.5 m total probe length and standard ClickLoc connection without a protector. Approval option 05 must be checked against delivered markings. Verify the matched sensing chain and the shifted electrical range before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 146054-08-05-02-05 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations. -
02 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
03 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations.
Technical specifications for 146054-08-05-02-05
-
Product Model146054-08-05-02-05
-
Product ParametersCeramic tipped proximity probe
-
In stock9 units
-
ManufacturerBently Nevada
-
Probe case thread3/8-24 UNF
-
Overall case length0.8 in
-
Total probe length0.5 m
-
Cable and connector selectionStandard cable, ClickLoc connector, no protector
-
Tip materialAlumina ceramic (Al2O3)
-
Case materialAISI 304 stainless steel
-
Cable construction75 ohm coaxial, FEP insulation
-
Rear sealingRear end is not sealed
-
Probe operating and storage range-51 to +177 deg C
-
Minimum cable bend radius25.4 mm
-
Maximum thread engagement0.563 in
-
Nominal probe resistance7.45 +/-0.5 ohm at 0.5 m length
-
Recommended electrical gap1.0 mm (40 mil), approximately -10 Vdc
-
Matched-system linear range1.52 mm (60 mil), shifted relative to a standard XL probe
-
Maximum ClickLoc torque0.565 N m; finger-tight connection
View all additional
Alternative Names
146054 08 05 02 05
146054-08-05-02-05 ceramic proximity probe
Bently Nevada 146054-08-05-02-05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
CERAMIC TIPPED PROXIMITY PROBE
Integrating 146054-08-05-02-05
The ceramic-tipped probe supports non-contact position and vibration measurement where its documented front-end chemical resistance is needed. Its rear end is not sealed, and the calibrated curve differs from a standard XL probe. Both environmental exposure and monitor configuration require careful review.
Use the documented compatible 5 m or 9 m XL sensing chain with the correct probe and extension lengths. The ceramic-probe output curve is shifted relative to standard XL probes. Monitor modification may be required because shaft contact can occur before the usual lower OK limit.
Set gap electrically without touching the target. Keep liquids and aggressive chemicals away from the unsealed rear, protect the cable connection and observe the thread-engagement limit. A pressure seal is not a substitute for containment engineering and the applicable installation instructions.
Features:
- Match complete ordering options, environmental exposure, monitoring input and installation geometry
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 146054-08-05-02-05 ceramic proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 146054-08-05-02-05 requires comparing complete ordering options, environmental exposure, monitoring input and installation geometry. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the documented compatible 5 m or 9 m XL sensing chain with the correct probe and extension lengths. The ceramic-probe output curve is shifted relative to standard XL probes. Monitor modification may be required because shaft contact can occur before the usual lower OK limit.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 146054-08-05-02-05 ceramic proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 146054-08-05-02-05 ceramic proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size117x2x2cm
-
Shipping weight0.04 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 146054-08-05-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 146054-08-05-02-05 identified?
This order specifies a 0.8 in case, 0.5 m total probe length and standard ClickLoc connection without a protector. Approval option 05 must be checked against delivered markings. Verify the matched sensing chain and the shifted electrical range before replacement. -
What is the measurement function?
The ceramic-tipped probe supports non-contact position and vibration measurement where its documented front-end chemical resistance is needed. Its rear end is not sealed, and the calibrated curve differs from a standard XL probe. Both environmental exposure and monitor configuration require careful review. -
Which monitoring equipment is compatible?
Use the documented compatible 5 m or 9 m XL sensing chain with the correct probe and extension lengths. The ceramic-probe output curve is shifted relative to standard XL probes. Monitor modification may be required because shaft contact can occur before the usual lower OK limit. -
Where can this product family be applied?
The manufacturer describes a ceramic front-end seal for applications including anhydrous ammonia. Only the documented front construction provides that resistance; the unsealed rear and connector must remain protected. -
What installation precautions are important?
Set gap electrically without touching the target. Keep liquids and aggressive chemicals away from the unsealed rear, protect the cable connection and observe the thread-engagement limit. A pressure seal is not a substitute for containment engineering and the applicable installation instructions. -
Can a standard XL probe be replaced without checking the OK limits?
Not automatically. The ceramic-probe output curve is shifted, and the target may contact the probe before the monitor reaches its lower OK limit. The manufacturer warns that monitor modification may be necessary. -
Is the entire probe protected against liquid exposure?
No. The 146054 rear end is not sealed and must not be exposed to water, anhydrous ammonia, ammonium hydroxide or hydrogen sulfide. The ceramic front-end seal does not protect the rear connection.
READY TO VERIFY YOUR PART?
Get a 146054-08-05-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
