PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 Ceramic Capped Probe
- 146054-34-20-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Ceramic capped proximity probe
Bently Nevada 146054-34-20-02-05 is a ceramic capped proximity probe. Its ceramic sensing end is intended for applications where aggressive process media make ordinary probe-tip materials unsuitable. It remains one component of a matched proximity measuring system, and the unsealed rear must be protected separately.
The order identifies a 3.4-inch case and two-metre lead with a standard ClickLoc connection. Verify the approval marking and rear protection. The ceramic tip shifts the response curve, so monitor OK limits may require adjustment.
The order identifies a 3.4-inch case and two-metre lead with a standard ClickLoc connection. Verify the approval marking and rear protection. The ceramic tip shifts the response curve, so monitor OK limits may require adjustment.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for Ceramic Capped Proximity Probe
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · AGGRESSIVE MEDIA
Protected probe fronts in chemical service
The alumina front is intended for aggressive media where standard probe-tip materials are unsuitable; rear protection remains essential. Verify the complete 146054-34-20-02-05 configuration for the installed system. -
02 · AMMONIA SERVICE
Anhydrous ammonia exposure at probe fronts
The manufacturer identifies anhydrous ammonia among ceramic-probe uses. Confirm all other wetted parts and protect the unsealed rear. Verify the complete 146054-34-20-02-05 configuration for the installed system. -
03 · PROCESS PRESSURE
Pressure-qualified proximity measurement
The front arrangement has a published nitrogen pressure test. Validate the actual medium, temperature and installation rather than assuming the test certifies every process. Verify the complete 146054-34-20-02-05 configuration for the installed system.
Technical specifications for 146054-34-20-02-05
-
Product Model146054-34-20-02-05
-
Spare Model146054-34-20-02-05
-
Product ParametersCeramic capped proximity probe
-
In stock5 units
-
ManufacturerBently Nevada
-
Case thread3/8-24 UNF
-
Case length3.4 in
-
Total probe length2.0 m
-
ConnectorClickLoc; standard cable, no protector
-
Approval option05; verify delivered marking
-
Tip materialAlumina ceramic
-
Probe caseAISI 304 stainless steel
-
Cable construction75 ohm coaxial, FEP insulation
-
Operating and storage temperature-51 to +177 deg C
-
Tested pressure34 bar (500 psi), nitrogen
-
Minimum bend radius25.4 mm
-
Nominal DC resistance7.88 +/-0.5 ohm
-
Recommended gap1.0 mm
-
Linear range1.52 mm; 0.25 to 1.78 mm gap
-
Rear sealNot sealed against aggressive media
View all additional
Alternative Names
146054 34 20 02 05
146054-34-20-02-05 ceramic capped proximity probe
Bently Nevada 146054-34-20-02-05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
CERAMIC CAPPED PROXIMITY PROBE
Integrating 146054-34-20-02-05
Its ceramic sensing end is intended for applications where aggressive process media make ordinary probe-tip materials unsuitable. It remains one component of a matched proximity measuring system, and the unsealed rear must be protected separately.
Confirm the complete compatible sensor and cable arrangement. The shifted response curve may require lowering the monitoring system OK limit; an unchanged limit can allow the target to strike the ceramic tip before a Not-OK indication.
The front seal is helium leak tested, but the rear is not sealed against aggressive media. Keep such media away from the rear termination; the published pressure rating is a nitrogen test, not universal chemical compatibility.
Features:
- Match complete order, mounting, connections and environmental limits
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 146054-34-20-02-05 ceramic capped proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 146054-34-20-02-05 requires comparing complete order, mounting, connections and environmental limits. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Confirm the complete compatible sensor and cable arrangement. The shifted response curve may require lowering the monitoring system OK limit; an unchanged limit can allow the target to strike the ceramic tip before a Not-OK indication.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 146054-34-20-02-05 ceramic capped proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 146054-34-20-02-05 ceramic capped proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 146054-34-20-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 146054-34-20-02-05?
Its ceramic sensing end is intended for applications where aggressive process media make ordinary probe-tip materials unsuitable. It remains one component of a matched proximity measuring system, and the unsealed rear must be protected separately. -
Which options identify this 146054 configuration?
The order identifies a 3.4-inch case and two-metre lead with a standard ClickLoc connection. Verify the approval marking and rear protection. The ceramic tip shifts the response curve, so monitor OK limits may require adjustment. -
Which system compatibility checks are required?
Confirm the complete compatible sensor and cable arrangement. The shifted response curve may require lowering the monitoring system OK limit; an unchanged limit can allow the target to strike the ceramic tip before a Not-OK indication. -
Where is the documented product family applied?
The manufacturer identifies anhydrous ammonia among ceramic-probe uses. Confirm all other wetted parts and protect the unsealed rear. -
What installation precautions apply to this configuration?
The front seal is helium leak tested, but the rear is not sealed against aggressive media. Keep such media away from the rear termination; the published pressure rating is a nitrogen test, not universal chemical compatibility. -
Can a similar part number be substituted directly?
No. Compare complete order, mounting, connections and environmental limits. Confirm the complete compatible sensor and cable arrangement. The shifted response curve may require lowering the monitoring system OK limit; an unchanged limit can allow the target to strike the ceramic tip before a Not-OK indication. -
Are hardware revisions or a direct successor confirmed?
No exact-order hardware revision, discontinuation date or manufacturer-designated successor has been verified. The reference document revision is not the supplied product hardware revision.
READY TO VERIFY YOUR PART?
Get a 146054-34-20-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
