PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 Ceramic Capped Probe
- 146056-38-10-02-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Longer-case ceramic measurement with protected rear cabling
Bently Nevada 146056-38-10-02-02-05 combines a 3.8-inch ceramic-capped probe case with a 1.0 m total assembly length. Stainless steel tubing protects the rear cable route, while the selected exit fitting is 1/2-inch NPT and the electrical connection uses a standard ClickLoc connector.
This longer-case configuration is intended for a mounting geometry matched to its complete order code. Its rear fitting must be sealed after the probe has been secured and electrically gapped; verify process exposure, monitor settings and the connected transducer system before returning the machinery to service.
This longer-case configuration is intended for a mounting geometry matched to its complete order code. Its rear fitting must be sealed after the probe has been secured and electrically gapped; verify process exposure, monitor settings and the connected transducer system before returning the machinery to service.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 146056-38-10-02-02-05
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · AMMONIA PROCESS
Protected proximity sensing on chemical-process machinery
The ceramic family is specified for machinery exposed to ammonia. This 3.8-inch case variant adds a stainless tube for a protected rear route; the mechanical drawing and final fitting seal must suit the actual machine rather than a generic family example. -
02 · CORROSIVE DUTY
Longer-case measurement points with rear media protection
Where a mounting position requires the documented longer case, the 146056 design addresses exposure at both the sensing front and rear cable exit. Confirm the destructive-media boundary and complete the rear seal after securing the probe. -
03 · PRESSURE SERVICE
Machine-casing probe penetrations requiring controlled sealing
Pressure-service use must be reviewed against the published nitrogen seal rating and actual containment design. Electrical gapping remains essential because direct force on the ceramic cap can damage the probe, even when the enclosure arrangement meets the mechanical drawing.
Technical specifications for 146056-38-10-02-02-05
-
Product Model146056-38-10-02-02-05
-
Product ParametersTubed ceramic proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread3/8-24 UNF
-
Case length3.8 in (96.52 mm)
-
Total probe length1.0 m
-
Exit fitting1/2-inch NPT
-
Connector typeStandard miniature coaxial ClickLoc
-
Rear cable protectionStainless steel tubing and rear fitting
-
Probe tip materialAlumina ceramic
-
Probe case materialAISI 304 stainless steel
-
Electrical cable75-ohm FEP-insulated coaxial
-
System linear span1.52 mm under specified system conditions
-
Recommended electrical gap1.0 mm
-
Operating and storage temperature-51 to +177 C
-
Published pressure seal rating34 bar nitrogen; installation sealing required
-
Nominal probe DC resistance7.59 +/-0.50 ohm
-
Approval order option05: multiple approvals; installation conditions apply
View all additional
Alternative Names
3.8-inch stainless-tubed ceramic probe
3300 protected-rear proximity sensor
1.0 m ceramic probe with 1/2-inch NPT exit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 CERAMIC CAPPED PROBE
Longer-case ceramic measurement with protected rear cabling
The 3.8-inch case places this 146056 assembly in a different mechanical configuration from shorter-case options. Its electrical total length remains 1.0 m, so the case dimension must not be mistaken for cable length or sensing range.
Stainless tubing and the 1/2-inch NPT exit provide the documented rear protective route. The selected standard ClickLoc connector joins the compatible electrical system; neither its presence nor the approval code removes the need for final installation sealing.
Use the manufacturer's ceramic-probe gap and response guidance with the connected Proximitor and extension cable. The rear fitting is sealed only after mounting and electrical gapping, and the actual process media and pressure containment remain engineering checks.
Features:
- 3.8-inch case with 1.0 m total length
- Tubed rear route and standard ClickLoc
- Mechanical mounting followed by gap and seal checks
The Bently Nevada 146056-38-10-02-02-05 ceramic proximity probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Do not shorten the case or substitute another 146056 suffix solely because the base family matches. The 3.8-inch option must be checked against the installed sensing position, allowed thread engagement and surrounding mechanical clearances.
Preserve the intended rear protection by matching tubing, exit fitting and final sealing requirements. A front-sealed-only probe does not establish equivalent protection, and a removable-nut connector is a different option from the standard connector specified here.
No exact-model withdrawal date, product revision or unconditional successor is established by the reviewed datasheet. An alternative should be approved only after the full electrical system, ceramic transfer curve, mechanical installation and hazardous-area conditions are reconciled.
Features:
- Maintain 3.8-inch installed geometry
- Check tubing, exit fitting and connector
- No blanket family-level interchangeability
The Bently Nevada 146056-38-10-02-02-05 ceramic proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 146056-38-10-02-02-05 ceramic proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 146056-38-10-02-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does case-length option 38 mean 38 millimeters?
No. The inch-thread 146056 table orders case lengths in 0.1-inch increments. Option 38 means 3.8 inches, or 96.52 mm. -
Can a shorter 146056 case replace this version directly?
Not solely because the base number matches. The overall case length is a specific ordering choice, so mounting engagement, sensing position, clearances and the full configuration must be checked before substitution. -
Is the stainless tube already pressure-sealed at delivery?
The datasheet says the rear fitting leaves the factory unsealed. It must be tightened after the probe is mounted and correctly gapped to complete rear protection. -
Can the ceramic tip touch the shaft while setting the gap?
Avoid contact. The manufacturer requires electrical gapping and warns that the tip cannot withstand direct mechanical loads. Its shifted response can also require changes to the monitor OK-limit assessment. -
How is the 1.0 m probe length different from system length?
The 1.0 m option is the total probe assembly length. Published scale-factor conditions refer to complete 5 m or 9 m systems, so the probe, extension cable and Proximitor configuration must be checked together. -
Does option 05 remove the need to check hazardous-area wiring?
No. It selects the multiple-approval option, but applicable barriers or isolators, wiring drawings, temperature limits and installation conditions remain necessary for the complete system.
READY TO VERIFY YOUR PART?
Get a 146056-38-10-02-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
