PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 Ceramic Capped Probe
- 146054-32-05-01-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Ceramic sensing front within a compatible 3300 system
Bently Nevada 146054-32-05-01-05 is a 3300 ceramic-capped proximity probe with a 3.2-inch case and 0.5 m total length. Its 3/8-24 UNF mounting thread, unarmored cable and protected ClickLoc connection support a specifically configured non-contact measurement installation.
The alumina tip and stainless steel case are intended for machinery exposed to aggressive process conditions at the probe front. The rear is not sealed against corrosive media, so installation must protect that area and verify the electrical gap, connected Proximitor system and approval requirements.
The alumina tip and stainless steel case are intended for machinery exposed to aggressive process conditions at the probe front. The rear is not sealed against corrosive media, so installation must protect that area and verify the electrical gap, connected Proximitor system and approval requirements.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 146054-32-05-01-05
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · CHEMICAL PROCESS
Anhydrous-ammonia machinery condition monitoring
The ceramic-capped family is intended for machinery where ammonia can contact the probe front. This forward-mount configuration requires a suitable 3.2-inch case installation and a protected rear cable exit; family suitability is not proof of a particular plant installation. -
02 · CORROSIVE MEDIA
Extreme-pH process equipment displacement measurement
The alumina cap and stainless case protect the sensing front in the manufacturer's stated extreme-pH applications. Match the target, system linear range and media boundary before using the probe, because the unsealed rear cannot share the destructive environment. -
03 · PRESSURIZED MACHINERY
Non-contact measurement through a sealed probe front
The family has a published 34 bar nitrogen sealing rating. Apply this configuration only after checking the actual pressure medium, containment arrangement and required testing; the pressure statement does not establish rear sealing or universal chemical compatibility.
Technical specifications for 146054-32-05-01-05
-
Product Model146054-32-05-01-05
-
Product ParametersUnarmored ceramic proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread3/8-24 UNF
-
Case length3.2 in (81.28 mm)
-
Total probe length0.5 m
-
Connector configurationClickLoc coaxial connector with protector
-
Cable armorNone
-
Probe tip materialAlumina ceramic
-
Probe case materialAISI 304 stainless steel
-
Cable construction75-ohm coaxial with FEP insulation
-
System linear span1.52 mm under specified system conditions
-
Recommended electrical gap1.0 mm
-
Operating and storage temperature-51 to +177 C
-
Published pressure seal rating34 bar nitrogen; front-end seal only
-
Nominal probe DC resistance7.45 +/-0.50 ohm
-
Cable minimum bend radius25.4 mm
-
Approval order option05: CSA, ATEX and IECEx; installation conditions apply
View all additional
Alternative Names
3.2-inch ceramic-capped proximity probe
3300 front-sealed chemical-service probe
0.5 m protected-connector ceramic sensor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 CERAMIC CAPPED PROBE
Ceramic sensing front within a compatible 3300 system
The manufacturer identifies this ceramic probe family for use with a 3300 Proximitor Sensor and extension cable. The 0.5 m probe assembly is only one part of that measurement loop and does not determine the total electrical system length alone.
This configuration has a 3.2-inch case and a protected ClickLoc connection. Its alumina front is intended for the stated chemical-service applications, but the rear case has no protective tube or sealed rear fitting.
Commission the loop using the ceramic-probe transfer characteristics. The specified 1.52 mm linear span and 1.0 mm recommended gap differ from standard-probe assumptions; target contact must be avoided and the monitor OK limits reviewed.
Features:
- 0.5 m probe plus matched system components
- 3.2-inch case with front-only sealing
- Ceramic transfer curve and OK-limit review
The Bently Nevada 146054-32-05-01-05 ceramic proximity probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement requires the complete 146054-32-05-01-05 configuration, including the 3.2-inch case, 0.5 m length, connector protector and approval option. A different case-length code changes mechanical geometry even when the electrical family is unchanged.
Do not assume this front-sealed probe can substitute for a 146056 installation that requires rear tubing and sealing. Conversely, adding rear-protection hardware changes installation access and must be assessed as an engineered configuration change.
No exact-model discontinuation date, hardware revision or fully qualified successor was confirmed in the reviewed source. When changing from a standard proximity probe, check the ceramic response curve and monitor limits before treating the replacement as operationally equivalent.
Features:
- Retain 3.2-inch case and full suffix
- Rear exposure must remain protected
- Check monitor response before service
The Bently Nevada 146054-32-05-01-05 ceramic proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 146054-32-05-01-05 ceramic proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 146054-32-05-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What case length does option 32 specify?
It specifies a 3.2-inch case. The 146054 inch-thread ordering table uses two digits in 0.1-inch increments; 32 is not a 32 mm case designation. -
Does connector option 01 include environmental protection?
Yes. It specifies a miniature coaxial ClickLoc connector with a connector protector and standard cable. This does not seal the rear of the probe case against corrosive process media. -
Can the back of this probe be exposed to ammonia or water?
No. The 146054 design seals the front ceramic-to-metal interface but has no rear fitting or stainless tube. The manufacturer warns against exposing its rear to destructive gases or liquids. -
Should I set its gap like a standard 3300 XL probe?
Use the ceramic probe's specified electrical gap and transfer curve. Its recommended gap is 1.0 mm and its linear span is shifted relative to standard probes; monitor OK limits may require additional review. -
What resistance should the 0.5 m probe measure?
The published nominal resistance between center and outer conductors is 7.45 +/-0.50 ohm for a 0.5 m probe. Use the applicable manufacturer diagnostic procedure rather than treating resistance alone as a complete calibration check. -
Can the cable be sharply bent near the connector?
The specified minimum bend radius is 25.4 mm. Route the cable and protect its connection accordingly, while avoiding mechanical loading of the ceramic tip during installation.
READY TO VERIFY YOUR PART?
Get a 146054-32-05-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
