AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 11mm Proximity Transducer
- 330710-000-060-50-02-00
In Stock
Ships by Sunday, July 19
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330710-000-060-50-02-00
-
Product Model330710-000-060-50-02-00
-
Product Parameters3300 XL 11 mm Proximity Probes
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size30x30x3cm
-
ManufacturerBently Nevada
-
Weight0.65 kg
-
Maximum unthreaded0 mm
-
Metric thread configurations60 mm
-
Total Length Option50 5.0 meters (16.4 feet)
-
Connector and Cable-Type OptionMiniature coaxial ClickLocconnector standard cable
-
Agency Approval OptionNot required
Description
The Bently Nevada 330710-000-060-50-02-00 is a 3300XL 11mm Proximity Probe with M16 x 1.5 metric thread and with armor, as a core component of the 3300XL 11mm Proximity Transducer System. The 330710-000-060-50-02-00 provides a 3.94 V/mm (100 mV/mil) output for non-contacting vibration and displacement measurements on fluid film bearing machines. The large 11mm tip of the 330710 enables this transducer system to have a longer linear range compared to the standard 3300XL 8mm Transducer System, making it primarily used in applications where the longer linear range is necessary.
The primary applications of the 330710-000-060-50-02-00 include axial (thrust) position measurements, ramp differential expansion measurements on steam turbines, rod position or rod drop measurements on reciprocating compressors, tachometer and zero speed measurements, and phase reference (Keyphasor) signals. The 330710 is designed for measuring position or vibration within a frequency range of 0 to 8 kHz, with typical applications including radial vibration and position, axial position, and Keyphasor measurements.
The primary applications of the 330710-000-060-50-02-00 include axial (thrust) position measurements, ramp differential expansion measurements on steam turbines, rod position or rod drop measurements on reciprocating compressors, tachometer and zero speed measurements, and phase reference (Keyphasor) signals. The 330710 is designed for measuring position or vibration within a frequency range of 0 to 8 kHz, with typical applications including radial vibration and position, axial position, and Keyphasor measurements.
Alternative Names
330710-000-060-50-02-OO
330710-000-060-50-O2-00
330710-000-060-50-0Z-00
330710-000-060-5O-02-00
330710-000-O6O-50-02-00
33071O-000-060-50-02-00
3307I0-000-060-50-02-00
33O710-000-060-50-02-00
330710 000 060 50 02 00
330710 000 060 50 02 OO
330710 000 060 50 OZ 00
330710 000 060 5O 02 00
3307I0 000 060 50 02 00
330710-000-060-50-02-05
330710-000-060-50-02-CN
330710-000-060-50-02-BR
330710-000-060-50-02-RU
Information
Overview
Manuals
Application Notes
Product Applications
Mechanical Insertion & Gapping
Features:
- M16 x 1.5 Metric Thread with Armored Construction
- Larger 11mm Tip for Extended Linear Range
- 3.94 V/mm (100 mV/mil) Output for Non-Contacting Measurements
- Patented TipLoc Molding for Robust Probe Tip Bond
- Patented CableLoc Design with 330N (75 lbf) Pull Strength
This probe features an M16 × 1.5 metric mounting thread with a 0 mm unthreaded length and an overall case length of 60 mm (2.36 in). The probe tip diameter is 11.0 mm, constructed from Polyphenylene Sulfide (PPS), while the probe case is made from AISI 303 or 304 stainless steel. This variant is supplied with armor (base model 330710).
The 330710-000-060-50-02-00 Bently Nevada 3300 XL 11 mm Probe, M16 x 1.5 thread,with armor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330710-000-060-50-02-00 3300 XL 11 mm Probe, M16 x 1.5 thread,with armor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The probe is equipped with a 5.0-metre 75 Ω triaxial cable using Fluoroethylene Propylene (FEP) insulation. The cable terminates in a miniature coaxial ClickLoc connector with gold-plated brass contacts, providing a secure, vibration-resistant mechanical connection that requires no tools for installation or removal. The connector protects contact surfaces from contamination.
The 3300 XL 11 mm system delivers an output voltage directly proportional to the distance between the probe tip and the observed conductive surface. The linear range is 4.0 mm (160 mils), spanning from approximately 0.5 mm to 4.5 mm, with an output voltage range of approximately -1 Vdc to -17 Vdc. The Incremental Sensitivity Factor (ISF) is 3.94 V/mm (100 mV/mil) with a ±5% tolerance (including interchangeability error) from 0°C to +45°C. The recommended radial vibration gap setting is -9 Vdc, corresponding to approximately 2.54 mm (100 mils).
- Centrifugal Compressors: Provides early warning of shaft imbalances, misalignments, or bearing failures
- Turbo-Expanders: Tracks high-speed rotor stability in cryogenic/gas-processing facilities
- Pipeline Pumps: Safeguards crude/product transport pumps from catastrophic damage
- Fans/Blowers: Monitors massive air handlers in steel mills, cement plants, and mining
- Gearboxes: Tracks high-load shaft displacements to prevent gear meshing disasters
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Inspect the Area: Ensure the target shaft surface is clean, free of scratches, and smooth to prevent false glitch readings.
Verify Side Clearance: Maintain a minimum counterbore diameter clearance around the 11 mm probe head to prevent side-wall interference from adjacent metal.
Thread the Probe: Thread the probe into the bracket or machine housing by hand until the tip lightly touches the target surface. Do not use tools to torque it against the shaft.
Set the Physical Gap: Back the probe out of the thread to create the target gap. The 11 mm system typically requires a linear operating gap centered around 2.0 to 3.0 mm from the surface.
Secure the Locknut: Tighten the external locknut against the machine casing or housing assembly to lock the probe's physical position. Ensure you do not twist the attached cable while locking it down.
Technical notes
The 330710-000-060-50-02-00 comes standard with a locknut with pre-drilled safety wire holes for secure mounting. The 330710 operates over a standard temperature range of -52°C to +177°C (-62°F to +351°F) for the probe, with the Proximitor Sensor operating from -52°C to +100°C (-62°F to +212°F). The 330710 is designed to seal differential pressure between the probe tip and case using a Viton® O ring sealing material.
FAQs
-
What is the 330710-000-060-50-02-00?
+The Bently Nevada 330710-000-060-50-02-00 is a specific variant of the 3300 XL 11 mm Proximity Probe, primarily used for continuous shaft displacement, rotor speed, and vibration monitoring in large-frame rotating machinery -
What is the normal gap voltage?
+For typical Bently Nevada 3300 XL probes, the optimal operational gap voltage is around -9 V to -11 V DC when the probe is properly gapped and the shaft is centered in the sensor's linear range. -
Why use an 11 mm probe instead of a standard 8 mm probe?
+The larger 11 mm tip allows for a longer linear measurement range. This is ideal for large-frame rotating machinery where shaft clearances and thermal growth patterns exceed 8 mm limits. -
Can I mix this probe with 8 mm or 50 mm components?
+No. You must connect this 11 mm probe exclusively to a 3300 XL 11 mm extension cable and an 11 mm Proximitor sensor. Mixing sizes will lead to calibration errors and incorrect data.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
-
-
330703-000-050-10-12-053300 XL 11 mm Probe, M14 x 1.5 thread,without armorManufacturer: Bently NevadaView Details -
-
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN