PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
8.5-metre FluidLoc extension for a matched transducer system
Bently Nevada 330130-085-10-00 is an 8.5-metre 3300 XL extension cable with the FluidLoc cable option and no requested agency approval under code 00. It forms part of the documented proximity measurement chain, together with the appropriate probe and Proximitor Sensor.
Select the cable as part of a matched electrical system rather than by physical reach alone. Verify the probe lead length, Proximitor system length, connector protection and installation environment. FluidLoc addresses liquid migration through the cable interior and must not be confused with mechanical armor.
Select the cable as part of a matched electrical system rather than by physical reach alone. Verify the probe lead length, Proximitor system length, connector protection and installation environment. FluidLoc addresses liquid migration through the cable interior and must not be confused with mechanical armor.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330130-085-10-00
These contexts are supported by the applicable manufacturer series documentation. They do not establish installation of this exact order in a named customer project.
-
01 · SHAFT VIBRATION
Extending a relative shaft-vibration measurement connection
In a documented 3300 XL 8 mm system, this cable connects the probe to the matched Proximitor Sensor for relative shaft-vibration measurements. It carries the transducer connection and does not independently measure vibration. -
02 · AXIAL POSITION
Routing a shaft-position transducer connection
The official system supports static position measurements. Use the 8.5 m extension only where the complete system length, probe configuration and installation requirements match the selected Proximitor; cable reach alone is insufficient. -
03 · PHASE AND SPEED
Interconnection for Keyphasor and speed channels
The 3300 XL 8 mm family supports phase-reference and speed measurements. This extension can serve the documented probe-to-sensor connection in a matching arrangement; target geometry and monitor configuration must still meet application requirements.
Technical specifications for 330130-085-10-00
-
Product Model330130-085-10-00
-
Product ParametersFluidLoc proximity extension cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Extension length8.5 m; length option 085
-
Cable fluid barrierFluidLoc cable; option 10
-
Cable armorWithout armor
-
Connector typeMiniature coaxial ClickLoc
-
Ordered approvalNot required; option 00
-
Cable impedance75 ohms nominal, triaxial cable
-
Center-conductor resistance1.87 +/-0.28 ohms for the 8.5 m extension
-
Outer-conductor resistance0.56 +/-0.11 ohms for the 8.5 m extension
-
Cable capacitance69.9 pF/m, typical
-
Minimum bend radius25.4 mm
-
Maximum connector torque0.565 N m
-
Cable operating/storage temperature-52 to +177 degrees C, standard-temperature cable
View all additional
Alternative Names
330130-085-10-00 FluidLoc extension cable
3300 XL 8.5 m non-armored cable
Bently Nevada 085-10-00 proximity system cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8MM PROXIMITY TRANSDUCER
Integrate the complete extension cable configuration
330130-085-10-00 is an extension cable within the 3300 XL 8 mm proximity transducer system. It is used with a compatible probe and Proximitor Sensor rather than as a standalone sensing device.
The 8.5 m extension must be included in the complete electrical-length check. For example, a documented 9 m arrangement combines a 0.5 m probe with an 8.5 m extension and a matching sensor.
The FluidLoc option is separate from armor and connector protection. Follow the documented connector, bend-radius and temperature requirements, and check the actual approval configuration of the complete installation.
Features:
- Match complete probe and extension electrical length
- FluidLoc is distinct from armor
- Check connector protection and system approvals
The Bently Nevada 330130-085-10-00 extension cable requires the associated hardware, mounting and measurement configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match 330130-085-10-00 in full: 8.5 m length, FluidLoc cable and approval option 00. A standard, armored or differently approved extension is not automatically the same ordered configuration.
Verify the probe, sensor length and connector arrangement before using another cable. Mixed XL and non-XL components do not establish full XL system performance, and arbitrary shortening is not a documented replacement method.
The reviewed official material does not establish an exact-order hardware revision, discontinuation date or approved successor. Document revisions identify the source publication, not the revision of the supplied cable.
Features:
- Preserve the 8.5 m FluidLoc configuration
- Verify the matching Proximitor Sensor
- Do not infer full XL performance from one cable
The Bently Nevada 330130-085-10-00 extension cable requires replacement verification against the complete installed configuration and applicable manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Existing product PDF references retained; document review remains required
- Match manufacturer document scope to the complete order and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330130-085-10-00 extension cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330130-085-10-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does 8.5 m identify the complete transducer system length?
No. It is the extension cable length. Match the combined probe and extension lengths to the selected Proximitor Sensor; an 8.5 m extension with a 0.5 m probe corresponds to a 9 m arrangement. -
Does option 10 mean the cable is armored?
No. Option 10 specifies FluidLoc cable in the 330130 ordering table. Armor is selected by different options, so this order must not be described as armored. -
What is the purpose of FluidLoc?
The manufacturer describes FluidLoc as preventing liquid migration through the cable interior. It is not a blanket guarantee that every connector or the entire installation is pressure sealed. -
Is a hazardous-area approval included under code 00?
The ordering table identifies 00 as approval not required. Do not transfer the 05 approval option from another order; verify the installed system and actual certificates separately. -
Can the cable be shortened to fit the installation?
Do not make an arbitrary electrical-length change. The probe, extension and Proximitor form a matched system; use the documented length and installation procedure. -
How should ClickLoc connectors be tightened?
The manufacturer specifies finger-tight connection for matching XL connectors and a maximum torque of 0.565 N m. Mixed connector types have separate instructions that must be checked before use. -
Does using this XL cable upgrade every older probe to XL performance?
No. The manufacturer states that systems mixed with non-XL components are limited by the applicable non-XL specifications. Mechanical connection alone does not establish full XL performance.
READY TO VERIFY YOUR PART?
Get a 330130-085-10-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
