PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Proximity signal conditioning sensor
Bently Nevada 330180-50-00 is a 3300 XL Proximitor Sensor for a 5 meter probe and extension cable system. The ordered configuration specifies panel mounting and does not request agency approvals. Its electrical length must match the complete sensing chain.
The sensor powers and conditions a compatible proximity probe to provide a voltage related to target distance. It supports static position and dynamic shaft vibration measurements within the documented system. Check negative supply polarity, target material, mounting arrangement and any safety barriers before commissioning.
The sensor powers and conditions a compatible proximity probe to provide a voltage related to target distance. It supports static position and dynamic shaft vibration measurements within the documented system. Check negative supply polarity, target material, mounting arrangement and any safety barriers before commissioning.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 330180-50-00 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations. -
02 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
03 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations.
Technical specifications for 330180-50-00
-
Product Model330180-50-00
-
Spare Model3300 XL 5/8MM
-
Product ParametersProximity signal conditioning sensor
-
In stock1 unit
-
ManufacturerBently Nevada
-
System electrical length5 m, probe plus extension cable
-
Mounting arrangementPanel mounting
-
Approval selection00: not required
-
Probe inputOne compatible 3300 5 mm or 3300 XL 8 mm probe
-
Nonincendive supply-17.5 to -26 Vdc; reduced range possible above -23.5 Vdc
-
Supply with safety barriers-23 to -26 Vdc
-
Maximum current consumption12 mA
-
Output resistance50 ohms
-
Supply sensitivityLess than 2 mV output change per volt of supply change
-
Housing materialA308 aluminum
-
Operating temperature-52 to +100 degrees C
-
Storage temperature-52 to +105 degrees C
View all additional
Alternative Names
330180-50-00 XL Proximitor
330180-50-00 5 m signal conditioner
330180-50-00 proximity transducer driver
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
PROXIMITY SIGNAL CONDITIONING SENSOR
Integrating 330180-50-00
Bently Nevada 330180-50-00 is a 3300 XL Proximitor Sensor for a 5 meter probe and extension cable system. The ordered configuration specifies panel mounting and does not request agency approvals. Its electrical length must match the complete sensing chain.
The sensor powers and conditions a compatible proximity probe to provide a voltage related to target distance. It supports static position and dynamic shaft vibration measurements within the documented system. Check negative supply polarity, target material, mounting arrangement and any safety barriers before commissioning.
Match the exact 330180-50-00 identity to the documented mating equipment and installed configuration. Review the manufacturer requirements for connections, operating conditions and component selection before service.
Features:
- System electrical length
- Mounting arrangement
- Approval selection
The 330180-50-00 proximity signal conditioning sensor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement selection requires the complete 330180-50-00 identity and the documented matching equipment. A shared platform or similar connector does not establish interchangeability.
Confirm the installed mounting, wiring and applicable hardware or software conditions against the manufacturer documentation before changing any part of the system.
The reviewed documents do not establish an exact-order discontinuation date, delivered hardware revision or unconditional successor. Publication revisions describe the document and are not recorded as product hardware revisions.
Features:
- Check complete identity and configuration
- Use documented matching equipment
- Verify revision and replacement conditions
The 330180-50-00 proximity signal conditioning sensor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330180-50-00 proximity signal conditioning sensor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size7.8x6x6.5cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330180-50-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the first option in 330180-50-00 specify?
It selects a 5 meter total system with panel mounting. This length includes the probe lead and extension, not only the cable. -
Can this sensor use a positive 24 Vdc supply?
The manufacturer specifies negative voltage relative to common. Confirm supply polarity and the applicable wiring diagram before connecting power. -
Does adding safety barriers affect the allowed supply?
Yes. The documented barrier arrangement requires -23 to -26 Vdc; the nonincendive arrangement has a different range. -
What happens if the supply is more positive than -23.5 Vdc?
The manufacturer warns that the linear measurement range can be reduced. Check the complete supply and load conditions. -
Can XL and non-XL 3300 components be mixed?
The manufacturer documents certain interchangeable 5 mm and 8 mm components, but a mixed chain is limited to the non-XL system specification. -
Does the suffix establish a hardware revision?
No. The approval and length options are not hardware revisions. Record a revision only from a confirmed manufacturer or product marking. -
Which mounting arrangement should a replacement retain?
This order uses panel mounting. Match the mounting hardware, enclosure space and electrical length rather than selecting solely by similar appearance.
READY TO VERIFY YOUR PART?
Get a 330180-50-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
