PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330881-16-10-100-03-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
PROXPAC XL metric proximity transducer assembly
Bently Nevada 330881-16-10-100-03-02 is a metric PROXPAC XL assembly combining an 8 mm proximity probe with a Proximitor sensor inside a protective housing. This configuration provides a 100 mm standoff and 100 mm probe penetration for externally accessible installation.
The selected fitting kit contains one M20 fitting and two plugs, with a 3/4-14 NPT mounting thread. Its integrated arrangement removes the separate probe extension cable; installation must preserve the specified target clearance, field wiring and temperature limits. Option 16 carries no hazardous-area approvals.
The selected fitting kit contains one M20 fitting and two plugs, with a 3/4-14 NPT mounting thread. Its integrated arrangement removes the separate probe extension cable; installation must preserve the specified target clearance, field wiring and temperature limits. Option 16 carries no hazardous-area approvals.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330881-16-10-100-03-02
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · Shaft vibration
Radial rotor monitoring through a machine casing
The integrated probe senses shaft motion while its housing remains accessible outside the machine. Target geometry and spacing must meet the PROXPAC installation requirements. -
02 · Position measurement
Axial position sensing in rotating machinery
A correctly positioned probe converts target clearance into a displacement signal. Probe separation and the specified linear gap range must be maintained. -
03 · Environmental protection
Enclosed proximity measurements in demanding plant environments
The PPS housing protects the integrated sensor and field terminals to Type 4X and IP66. This exact option must not be presented as hazardous-area approved.
Technical specifications for 330881-16-10-100-03-02
-
Product Model330881-16-10-100-03-02
-
Product ParametersIntegrated proximity transducer assembly
-
In stock1 unit
-
ManufacturerBently Nevada
-
Probe diameter8 mm
-
Standoff adapter100 mm
-
Probe penetration100 mm
-
Conduit fitting kitOne M20 fitting and two plugs
-
Mounting thread3/4-14 NPT
-
Approval optionWithout approvals, option 16
-
Supply requirement-17.5 to -26 Vdc without barriers; 12 mA maximum
-
Output resistance50 ohms
-
Linear measurement range2 mm (80 mils)
-
Recommended gap1.27 mm (50 mils)
-
Frequency response0 to 10 kHz, +0/-3 dB
-
Field-wiring conductors16 to 24 AWG; shielded three-conductor triax recommended
-
Enclosure protectionType 4X and IP66
-
Probe temperature-52 to +177 C; pressure seal may fail prematurely below -34 C
-
Housing and Proximitor temperature-52 to +100 C operating
View all additional
Alternative Names
330881-16-10-100-03-02 integrated proximity assembly
PROXPAC XL metric 100 mm penetration assembly
8 mm probe with integrated Proximitor housing
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
PROXPAC XL
Integrated proximity sensing at the machine casing
The PROXPAC XL assembly places the Proximitor sensor in the housing cover and the 8 mm probe in a sleeve, forming a self-contained proximity measurement system.
A one-metre probe cable connects inside the assembly. Monitor field wiring connects directly to the housing, so a separate probe extension cable and separate Proximitor enclosure are unnecessary.
Use an appropriate proximity-monitor input and preserve the documented gap, target size, probe spacing and field-wiring arrangement. The selected option has no hazardous-area approvals.
Features:
- 8 mm probe with one-metre internal cable
- Direct connection from the assembly to monitor field wiring
- Externally accessible probe adjustment through the protective housing
The Bently Nevada 330881-16-10-100-03-02 integrated proximity transducer requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement selection must match the complete 330881-16-10-100-03-02 reference. Standoff length, probe penetration, fitting kit and mounting thread are separate ordering choices rather than interchangeable dimensions.
The existing channel must support the documented proximity signal and power requirements. Confirm target geometry, calibration gap and operating temperatures before returning the measurement to service.
No exact discontinuation date or manufacturer-approved direct successor was established in the inspected public sources. Another PROXPAC configuration must not be described as a drop-in replacement without engineering verification.
Features:
- Preserve standoff, penetration and mounting-thread compatibility
- Recheck gap setting and monitor signal requirements
- Do not substitute approved and non-approved variants indiscriminately
The Bently Nevada 330881-16-10-100-03-02 integrated proximity transducer requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330881-16-10-100-03-02 integrated proximity transducer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330881-16-10-100-03-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does option 16 specify on 330881-16-10-100-03-02?
It selects a 3300 XL 8 mm probe without approvals. -
Is a separate extension cable required?
No. The Proximitor is incorporated into the housing cover, and field wiring runs directly to the monitor. -
What are the standoff and penetration dimensions?
Both are 100 mm, but they describe different installation dimensions: adapter standoff and probe penetration. -
Which conduit fitting and mounting thread are supplied?
Option 03 supplies one M20 fitting and two plugs. Option 02 selects a 3/4-14 NPT mounting thread. -
What probe gap is recommended?
The datasheet recommends 1.27 mm, or 50 mils. Confirm the target and installed calibration before commissioning. -
Can the whole assembly operate at the probe temperature limit?
No. The probe is rated to +177 C, but the housing and Proximitor operating limit is +100 C. -
Does IP66 make this configuration suitable for a hazardous area?
No. IP66 describes enclosure protection; option 16 is explicitly the configuration without approvals.
READY TO VERIFY YOUR PART?
Get a 330881-16-10-100-03-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
330881-16-10-100-03-02Integrated proximity transducer assemblyManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
