PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330500-00-02 product overview
Bently Nevada 330500-00-02 is a Velomitor piezo-velocity sensor for measuring machine casing vibration. It is part of the 330500/330525 sensor family and is used with the specified mounting and signal-conditioning arrangement.
Confirm sensor sensitivity, mounting surface, connector, cable and monitoring input before replacement. Follow the applicable installation procedure and verify vibration response after commissioning.
Confirm sensor sensitivity, mounting surface, connector, cable and monitoring input before replacement. Follow the applicable installation procedure and verify vibration response after commissioning.
BEFORE YOU BUY
Check the complete 330500-00-02 order and installed system
ACTUAL APPLICATIONS
Where 330500-00-02 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
02 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
03 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants.
Technical specifications for 330500-00-02
-
Product Model330500-00-02
-
Product ParametersVelomitor piezo-velocity sensor
-
In stock1 unit
-
ManufacturerBently Nevada
-
Sensor Family330500 Velomitor
-
Mounting Adapter Option00: No adapter
-
Agency Approval Option02: ATEX
-
Sensitivity100 mV/in/s ±5%
-
Velocity Range50 in/s peak
-
Frequency Response4.5 Hz to 5 kHz ±3 dB
-
Operating Temperature-55 to +121 °C
-
Output Bias Voltage-12 ±3 VDC
-
Connector2-pin MIL-C-5015 receptacle
-
GroundingCase isolated
View all additional
Alternative Names
330500-00-02
330500 ATEX Velomitor
100 mV/in/s velocity sensor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
330500 VELOMITOR SENSOR ARCHITECTURE
Integrate the velocity sensor with the correct monitor and cable
Bently Nevada 330500-00-02 is a Velomitor piezo-velocity sensor with no mounting-thread adaptor and the ATEX approval option. It measures absolute bearing-housing, casing or structural vibration.
The solid-state sensor provides a velocity output through its two-pin connector and requires the documented monitor power and cable arrangement. Mounting location and surface preparation affect the measured response.
Verify the monitor input, polarity, connector, cable, mounting thread and hazardous-area requirements before commissioning. Do not use the output as displacement data without evaluating integrated noise.
Features:
- 100 mV/in/s velocity sensitivity
- No mounting-thread adaptor option
- ATEX approval option 02
The Bently Nevada 330500-00-02 330500 Velomitor piezo-velocity sensor requires the complete model, mounting adaptor, two-wire cable, monitor input, polarity and hazardous-area approval to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Bently Nevada 330500-00-02 must be replaced only with a unit matching the complete model, mounting adaptor, two-wire cable, monitor input, polarity and hazardous-area approval. A similar family name does not establish interchangeability.
Record the installed label, mounting arrangement, wiring or cable details, connected monitor and approval requirements before removing the existing 330500 Velomitor piezo-velocity sensor.
Verify the manufacturer documentation for the proposed replacement and recheck the installed gap, mounting, wiring and monitor configuration before commissioning.
Features:
- Match the complete model and suffix
- Check mounting, cable and monitor interfaces
- Revalidate wiring and measurement configuration
The Bently Nevada 330500-00-02 330500 Velomitor piezo-velocity sensor requires replacement verification of the complete identifier, mounting, wiring, connected system and approval requirements before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The documents below provide applicable technical information for the Bently Nevada 330500-00-02 330500 Velomitor piezo-velocity sensor. Confirm the supplied item and document availability in the written quotation.
Features:
- Available Bently Nevada document references are confirmed before order
- Match the complete model suffix and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330500-00-02 330500 Velomitor piezo-velocity sensor must be matched to the complete identifier and installed system; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm in written quote
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330500-00-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does adapter option 00 mean?
It means no mounting-thread adapter is supplied. -
Which approval is selected by option 02?
Option 02 specifies ATEX approval; verify the received marking. -
What is the sensor sensitivity?
The official datasheet specifies 100 mV/in/s with ±5 percent tolerance. -
What velocity range is supported?
The documented peak velocity range is 50 in/s. -
Which mounting interface remains without an adapter?
The sensor drawing identifies the native 3/8-24 UNF mounting interface. -
What is the operating temperature range?
The specified range is -55 to +121 degrees Celsius. -
Which cable connection is used?
Use the documented two-pin MIL-C-5015 connector with a compatible shielded cable. -
What should be checked during commissioning?
Confirm output bias voltage, cable integrity, polarity and velocity response before service.
READY TO VERIFY YOUR PART?
Get a 330500-00-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
