PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330525-00 Velomitor XA velocity sensor
Bently Nevada 330525-00 is a Velomitor XA velocity sensor for the Bently Nevada Velomitor sensors.
Use the Velomitor XA housing and weatherproof connection for extended-environment casing vibration measurements on reciprocating machinery. Mount on a flat rigid surface, preserve the selected adapter and route the shielded sensor cable away from high-current conductors. Confirm the exact article, installed interfaces and controlled commissioning record before ordering.
Use the Velomitor XA housing and weatherproof connection for extended-environment casing vibration measurements on reciprocating machinery. Mount on a flat rigid surface, preserve the selected adapter and route the shielded sensor cable away from high-current conductors. Confirm the exact article, installed interfaces and controlled commissioning record before ordering.
BEFORE YOU BUY
Confirm the complete Velomitor XA velocity sensor
ACTUAL APPLICATIONS
Where 330525-00 Fits Across Major Industry Sectors
Uses span oil and gas, chemicals and mining, subject to verified compatibility, operating conditions and project requirements.
- 01 · OIL & GAS
Natural Gas Processing and Liquefied Gas Production
Natural gas processing for commercial energy and industrial markets.Liquefied natural gas production and handling across energy operations. - 02 · CHEMICAL PROCESSING
Methanol Production and Agricultural Fertilizer Manufacturing Industries
Methanol production and processing for commercial chemical feedstock supply.Fertilizer manufacturing and nutrient production serving agricultural supply markets. - 03 · MINING & MINERALS
Mineral Extraction and Ore Processing for Industrial Supply
Mineral extraction supporting industrial raw materials and resource production.Ore processing and beneficiation for downstream mineral product supply.
Technical specifications for 330525-00
-
Product Model330525-00
-
Product ParametersVelomitor XA velocity sensor
-
In stock1 unit
-
ManufacturerBently Nevada
-
Model Number330525-00
-
Sensitivity3.94 mV/mm/s ±5%
-
English Sensitivity100 mV/in/s ±5%
-
Velocity Range1270 mm/s peak
-
Amplitude Linearity±2% to 152 mm/s peak
-
Supply Voltage-22 to -30 V DC
-
Bias Current2.5–6.0 mA
-
Housing Material316L stainless steel
-
Environmental RatingIP65 / NEMA 4X with cable
-
Mounting InterfaceAdapter-selected threaded mount
-
Signal ConnectorWeatherproof two-pin interface
-
Frequency UseCasing vibration measurement
View all additional
Alternative Names
330525 00
Bently Nevada Velomitor sensors
Velomitor XA velocity sensor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 330525-00 to the installed Bently Nevada Velomitor sensors
Bently Nevada 330525-00 is a Velomitor XA velocity sensor documented for the Bently Nevada Velomitor sensors. Use the Velomitor XA housing and weatherproof connection for extended-environment casing vibration measurements on reciprocating machinery.
Mount on a flat rigid surface, preserve the selected adapter and route the shielded sensor cable away from high-current conductors. Confirm 1270 mm/s peak, ±2% to 152 mm/s peak, mechanical location and the approved system configuration before connection.
Verify -22 to -30 V DC excitation, 2.5–6.0 mA bias current and 100 mV/in/s sensitivity at the monitoring channel. Use qualified personnel, retain the official manufacturer instructions at the work location and save the final commissioning results with the equipment record.
Features:
- Exact identity: 330525-00
- Product class: Velomitor XA velocity sensor
- Family: Bently Nevada Velomitor sensors
The Bently Nevada 330525-00 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 330525-00 configuration before exchange
Replace 330525-00 only after matching the full product identity, 1270 mm/s peak, ±2% to 152 mm/s peak and installed system role. A similar family name or partial article number does not establish direct interchangeability.
Photograph the module label, rack or control-unit position, every connector, cable route, shield, earth point and companion module before removal. Compare the documented electrical and communication limits against the saved project or rack configuration.
After installation, restore the controlled configuration and complete the model-specific checks described in the official manufacturer document. Record status indications, diagnostics, signal or communication results and the final acceptance evidence before release.
Features:
- Match exact 330525-00 identity
- Confirm ±2% to 152 mm/s peak
- Record Adapter-selected threaded mount
The Bently Nevada 330525-00 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Technical values prepared for 330525-00
- Bently Nevada manufacturer pages attached
- Exact identity required before installation
Documentation for Bently Nevada 330525-00 must match the installed system and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size10.4 × 5 × 5 cm
-
Shipping weight0.35 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330525-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which field connection needs verification on 330525-00?
For 330525-00, verify model number: 330525-00. Retain the result with the quotation or maintenance record. -
What receiving inspection applies to 330525-00?
For 330525-00, verify sensitivity: 3.94 mV/mm/s ±5%. Retain the result with the quotation or maintenance record. -
Which final test proves correct operation of 330525-00?
For 330525-00, verify english sensitivity: 100 mV/in/s ±5%. Retain the result with the quotation or maintenance record. -
Which exact order-code details should a distributor confirm for 330525-00?
For 330525-00, verify velocity range: 1270 mm/s peak. Retain the result with the quotation or maintenance record. -
What should maintenance photograph before removing 330525-00?
For 330525-00, verify amplitude linearity: ±2% to 152 mm/s peak. Retain the result with the quotation or maintenance record. -
Which electrical rating governs replacement of 330525-00?
For 330525-00, verify supply voltage: -22 to -30 V DC. Retain the result with the quotation or maintenance record. -
How should engineering commission 330525-00?
For 330525-00, verify bias current: 2.5–6.0 mA. Retain the result with the quotation or maintenance record. -
What compatibility check prevents a wrong substitute for 330525-00?
For 330525-00, verify housing material: 316L stainless steel. Retain the result with the quotation or maintenance record.
READY TO VERIFY YOUR PART?
Get a 330525-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
