PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Machine vibration velocity sensor
Bently Nevada 330750-40-05 is a velocity transducer. It converts vibration at the mounting surface into a velocity signal for the receiving instrument. Correct mechanical coupling and a compatible input are essential; the application must remain within the documented frequency response and environmental limits of the supplied configuration.
The order selects the stated mounting or cable configuration for this velocity-sensing family. Confirm the complete suffix and supplied markings, and check the sensor and electronics temperature limits separately when installing or replacing the transducer.
The order selects the stated mounting or cable configuration for this velocity-sensing family. Confirm the complete suffix and supplied markings, and check the sensor and electronics temperature limits separately when installing or replacing the transducer.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 330750-40-05 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
02 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants. -
03 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities.
Technical specifications for 330750-40-05
-
Product Model330750-40-05
-
Product ParametersMachine vibration velocity sensor
-
In stock2 units
-
ManufacturerBently Nevada
-
Sensing principlePiezoelectric velocity measurement
-
Sensitivity5.7 mV/mm/s +/-5 percent
-
Transverse sensitivityLess than 5 percent
-
Amplitude linearityWithin +/-2 percent up to 152 mm/s
-
Frequency response15 to 2000 Hz; +/-3 dB
-
Bias voltage-12 +/-2 V
-
Integral cable length4.0 m
-
Electronics temperature-55 to +121 deg C
-
High-temperature head condition400 deg C capability requires a serial number beginning with G
-
Case isolationSignal circuit isolated from case
-
Approval optionMultiple approvals; verify delivered marking
View all additional
Alternative Names
330750 40 05
330750-40-05 velocity transducer
Bently Nevada 330750-40-05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
MACHINE VIBRATION VELOCITY SENSOR
Integrating 330750-40-05
It converts vibration at the mounting surface into a velocity signal for the receiving instrument. Correct mechanical coupling and a compatible input are essential; the application must remain within the documented frequency response and environmental limits of the supplied configuration.
Select a receiver input compatible with the specified velocity sensitivity, bias and excitation arrangement. Do not substitute a self-generating moving-coil sensor solely because both devices measure velocity.
Use the documented mounting interface and torque where specified. Secure the cable and confirm the input polarity, excitation and operating range before energizing. For high-temperature systems, keep the electronics within their separate environmental rating.
Features:
- Match the complete ordering identity, mounting interface, electrical connections and operating limits
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330750-40-05 velocity transducer requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330750-40-05 requires comparing the complete ordering identity, mounting interface, electrical connections and operating limits. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Select a receiver input compatible with the specified velocity sensitivity, bias and excitation arrangement. Do not substitute a self-generating moving-coil sensor solely because both devices measure velocity.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330750-40-05 velocity transducer requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330750-40-05 velocity transducer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size34x23x4cm
-
Shipping weight0.7 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330750-40-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented identity of 330750-40-05?
The order selects the stated mounting or cable configuration for this velocity-sensing family. Confirm the complete suffix and supplied markings, and check the sensor and electronics temperature limits separately when installing or replacing the transducer. -
What function does this velocity transducer perform?
It converts vibration at the mounting surface into a velocity signal for the receiving instrument. Correct mechanical coupling and a compatible input are essential; the application must remain within the documented frequency response and environmental limits of the supplied configuration. -
What must be matched when connecting this 330750?
Select a receiver input compatible with the specified velocity sensitivity, bias and excitation arrangement. Do not substitute a self-generating moving-coil sensor solely because both devices measure velocity. -
Which documented application is relevant to this configuration?
The transducer observes motion at a suitable bearing housing and supplies its signal to an appropriately configured receiver. -
What must the installer check before commissioning?
Use the documented mounting interface and torque where specified. Secure the cable and confirm the input polarity, excitation and operating range before energizing. For high-temperature systems, keep the electronics within their separate environmental rating. -
What is the specified integral cable length?
4.0 m. This value belongs to the documented product or family scope; unresolved ordering fields are not inferred. -
Are all suffixes, revisions and replacements confirmed?
The actual serial prefix is unverified. Do not apply the 400 deg C rating to older units, which are limited to 300 deg C.
READY TO VERIFY YOUR PART?
Get a 330750-40-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
