PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
High temperature velocity transducer
Bently Nevada 330750-60-05 is a high-temperature velocity transducer. The system measures vibration velocity using a high-temperature sensing head, permanently attached hardline cable and separately located electronics. Keeping the electronics within its lower temperature limit is essential. The sensor temperature rating depends on the manufacturing generation identified by its serial prefix.
The 330750-60-05 order identifies 6.0 m of integral hardline cable. The 05 approval option must be checked against the delivered marking and applicable drawing. Verify the serial prefix, mounting arrangement and receiving monitor before selecting a replacement.
The 330750-60-05 order identifies 6.0 m of integral hardline cable. The 05 approval option must be checked against the delivered marking and applicable drawing. Verify the serial prefix, mounting arrangement and receiving monitor before selecting a replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 330750-60-05 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
02 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants. -
03 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities.
Technical specifications for 330750-60-05
-
Product Model330750-60-05
-
Product ParametersHigh temperature velocity transducer
-
In stock3 units
-
ManufacturerBently Nevada
-
Integral hardline cable length6.0 m
-
Nominal sensitivity5.7 mV/mm/s (145 mV/in/s)
-
Sensitivity tolerance+/-5% at 100 Hz and +20 to +30 deg C
-
Frequency response15-2000 Hz within +/-3 dB
-
Transverse sensitivityLess than 5% of axial sensitivity
-
Amplitude linearity+/-2% to 152 mm/s peak
-
Electronics operating range-55 to +121 deg C
-
Sensor temperature generation400 deg C requires serial prefix G; earlier versions are limited to 300 deg C
-
Maximum velocity below 680 Hz635 mm/s peak
-
Nominal bias voltage-12 +/-2 Vdc
-
Noise over 15-2000 Hz0.127 mm/s rms equivalent
-
Minimum hardline bend radius51 mm
-
Output constructionIsolated from case
-
Connector arrangementTwo-pin MIL-C-5015 hermetic connector
-
Environmental limitationHermetically sealed; non-submerged service
View all additional
Alternative Names
330750 60 05
330750-60-05 high-temperature velocity transducer
Bently Nevada 330750-60-05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
HIGH TEMPERATURE VELOCITY TRANSDUCER
Integrating 330750-60-05
The system measures vibration velocity using a high-temperature sensing head, permanently attached hardline cable and separately located electronics. Keeping the electronics within its lower temperature limit is essential. The sensor temperature rating depends on the manufacturing generation identified by its serial prefix.
Use an input configured for the documented 145 mV/in/s high-temperature velocity system and its required power arrangement. Similar two-pin connectors do not establish compatibility with a 100 mV/in/s Velomitor. Verify the complete assembly, serial generation and monitor configuration.
Mount the sensing head where the vibration of interest reaches the machine casing. Route the permanently attached hardline with at least 51 mm bend radius, and locate the electronics within -55 to +121 deg C. Follow system guide 135090 and applicable approval drawings.
Features:
- Match complete ordering options, environmental exposure, monitoring input and installation geometry
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330750-60-05 high-temperature velocity transducer requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330750-60-05 requires comparing complete ordering options, environmental exposure, monitoring input and installation geometry. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use an input configured for the documented 145 mV/in/s high-temperature velocity system and its required power arrangement. Similar two-pin connectors do not establish compatibility with a 100 mV/in/s Velomitor. Verify the complete assembly, serial generation and monitor configuration.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330750-60-05 high-temperature velocity transducer requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330750-60-05 high-temperature velocity transducer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.4x22x3cm
-
Shipping weight0.14 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330750-60-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 330750-60-05 identified?
The 330750-60-05 order identifies 6.0 m of integral hardline cable. The 05 approval option must be checked against the delivered marking and applicable drawing. Verify the serial prefix, mounting arrangement and receiving monitor before selecting a replacement. -
What is the measurement function?
The system measures vibration velocity using a high-temperature sensing head, permanently attached hardline cable and separately located electronics. Keeping the electronics within its lower temperature limit is essential. The sensor temperature rating depends on the manufacturing generation identified by its serial prefix. -
Which monitoring equipment is compatible?
Use an input configured for the documented 145 mV/in/s high-temperature velocity system and its required power arrangement. Similar two-pin connectors do not establish compatibility with a 100 mV/in/s Velomitor. Verify the complete assembly, serial generation and monitor configuration. -
Where can this product family be applied?
The system converts motion at the selected housing location into a velocity-related signal. The receiving monitor must use the documented sensitivity, and sufficient machine vibration must reach the sensor location. -
What installation precautions are important?
Mount the sensing head where the vibration of interest reaches the machine casing. Route the permanently attached hardline with at least 51 mm bend radius, and locate the electronics within -55 to +121 deg C. Follow system guide 135090 and applicable approval drawings. -
Does every 330750 or 330752 sensor permit 400 C operation?
No. The datasheet limits the 400 deg C rating to units with serial-number prefix G. Earlier generations are limited to 300 deg C. The electronics remain limited to +121 deg C, regardless of head generation. -
Can this system replace a 100 mV/in/s Velomitor directly?
Do not assume a direct replacement. This system has 145 mV/in/s nominal sensitivity and a separate-electronics arrangement. Match input scaling, power, mechanical mounting and the complete documented transducer system.
READY TO VERIFY YOUR PART?
Get a 330750-60-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
