PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500 System
- 3500/04 138257-01
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Earthing module front panel
Bently Nevada 3500/04 138257-01 is a earthing front panel. The panel is the identified front component for the internal-barrier earthing arrangement. It is not the rear earthing I/O or a measuring channel. Match the separately documented earthing hardware and complete rack installation before replacement.
The manufacturer lists 138257-01 as the Earthing Module Front Panel. Check the complete 3500/04 assembly and grounding installation. The source does not assign sensor-channel ratings to this spare or establish the delivered approval option.
The manufacturer lists 138257-01 as the Earthing Module Front Panel. Check the complete 3500/04 assembly and grounding installation. The source does not assign sensor-channel ratings to this spare or establish the delivered approval option.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500/04 internal barrier system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · BARRIER INSTALLATIONS
Rack grounding for intrinsically safe interfaces
A rack using internal-barrier I/O requires the documented IS earth path. This function is separate from the individual monitoring channels and their measured values. -
02 · MIXED I/O RACKS
Standard and internal-barrier arrangements
The manufacturer permits standard and barrier I/O within one rack while preserving separation of safe and hazardous wiring. Physical access and cabinet depth must also be considered. -
03 · RACK UPGRADES
Adding the specified earthing arrangement
A retrofit to internal-barrier I/O requires the dedicated earth module and suitable module configuration. It is not achieved by changing only the front identification panel.
Technical specifications for 3500/04 138257-01
-
Product Model3500/04 138257-01
-
Spare Model138257-01
-
Product ParametersEarthing module front panel
-
In stock10 units
-
ManufacturerBently Nevada
-
Part functionEarthing-module front panel
-
System association3500/04 internal-barrier earthing arrangement
-
Separate earthing I/O136719-01
View all additional
Alternative Names
3500/04 138257 01
3500/04 138257-01 earthing front panel
Bently Nevada 3500/04 138257-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
EARTHING MODULE FRONT PANEL
Integrating 3500/04 138257-01
The panel is the identified front component for the internal-barrier earthing arrangement. It is not the rear earthing I/O or a measuring channel. Match the separately documented earthing hardware and complete rack installation before replacement.
Use this part within the documented 3500 internal-barrier arrangement. Standard and barrier I/O can share a rack, but internal-barrier I/O does not support external termination or TMR transducer fan-out. The actual monitor and transducer combination must satisfy the applicable requirements.
Provide the required dedicated earthing position and maintain safe/hazardous field-wiring separation. Keep the earth module accessible for maintenance. Follow the controlled installation instructions and selected barrier parameters; the front panel alone cannot provide the required IS earth connection.
Features:
- Match monitor generation, matched front and rear assemblies, wiring and software
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3500/04 138257-01 earthing front panel requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3500/04 138257-01 requires comparing monitor generation, matched front and rear assemblies, wiring and software. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use this part within the documented 3500 internal-barrier arrangement. Standard and barrier I/O can share a rack, but internal-barrier I/O does not support external termination or TMR transducer fan-out. The actual monitor and transducer combination must satisfy the applicable requirements.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3500/04 138257-01 earthing front panel requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3500/04 138257-01 earthing front panel must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24.3x4.6x15.5cm
-
Shipping weight0.55 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/04 138257-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 3500/04 138257-01 identified?
The manufacturer lists 138257-01 as the Earthing Module Front Panel. Check the complete 3500/04 assembly and grounding installation. The source does not assign sensor-channel ratings to this spare or establish the delivered approval option. -
What is the function of this component?
The panel is the identified front component for the internal-barrier earthing arrangement. It is not the rear earthing I/O or a measuring channel. Match the separately documented earthing hardware and complete rack installation before replacement. -
Which installed equipment must be matched?
Use this part within the documented 3500 internal-barrier arrangement. Standard and barrier I/O can share a rack, but internal-barrier I/O does not support external termination or TMR transducer fan-out. The actual monitor and transducer combination must satisfy the applicable requirements. -
Where is this component used?
A rack using internal-barrier I/O requires the documented IS earth path. This function is separate from the individual monitoring channels and their measured values. -
What must be checked during installation?
Provide the required dedicated earthing position and maintain safe/hazardous field-wiring separation. Keep the earth module accessible for maintenance. Follow the controlled installation instructions and selected barrier parameters; the front panel alone cannot provide the required IS earth connection. -
Can the dedicated earthing position also hold a monitor?
No. The manufacturer states that the earthing module prevents use of that position for other modules and limits a standard 19-inch rack to 13 monitor positions. -
Are internal barriers compatible with external termination and TMR?
No. The reference excludes external-termination I/O and TMR transducer connections from the internal-barrier arrangement because they compromise the documented intrinsically safe configuration.
READY TO VERIFY YOUR PART?
Get a 3500/04 138257-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
