PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500 System
- 3500/92 136180-01
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Machinery rack communication module
Bently Nevada 3500/92 136180-01 is a communication gateway. The gateway transfers rack measurements and status information to process-control and automation systems using supported communications. It also supports manufacturer configuration and data-acquisition software connections. Actual returned data depend on the installed monitor types and channel configuration.
The manufacturer spare table identifies 136180-01 as the 3500/92 communication gateway. Verify the selected rear interface, host protocol, register mapping and firmware. Similar connectors or a shared 3500 designation do not confirm equivalent wiring or software configuration.
The manufacturer spare table identifies 136180-01 as the 3500/92 communication gateway. Verify the selected rear interface, host protocol, register mapping and firmware. Similar connectors or a shared 3500 designation do not confirm equivalent wiring or software configuration.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500 machinery monitoring system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · PROCESS CONTROL
Rack values to automation systems
The manufacturer documents transfer of monitored values and rack status to process-control and automation systems. The gateway supplies communications rather than replacing the configured machinery monitors. -
02 · ETHERNET COMMUNICATION
Configuration and data acquisition
Supported Ethernet arrangements connect manufacturer configuration and data-acquisition software. The exact I/O and software configuration must support the intended network connection. -
03 · GATEWAY MAINTENANCE
Mapping-aware communication replacement
The 3500/92 provides configurable Modbus registers in place of the original 3500/90 primary-value register arrangement. Upgrade work must preserve the host data mapping and compatible I/O firmware.
Technical specifications for 3500/92 136180-01
-
Product Model3500/92 136180-01
-
Spare Model136180-01
-
Product ParametersMachinery rack communication module
-
In stock4 units
-
ManufacturerBently Nevada
-
Compatible rack family3500 communication gateway
-
Rack positionOne full-height front slot
-
Operating temperature-30 to +65 deg C
-
Storage temperature-40 to +85 deg C
-
Humidity limit95%, noncondensing
-
Collected informationRack measured values, module states and alarm statuses
-
Maximum rack update interval1 second, dependent on rack configuration
-
Serial communicationModbus RTU through matching serial I/O
-
Ethernet network10 Mbps IEEE 802.3
-
Network connectionRJ45 for 10BASE-T star topology
-
Network protocolsTCP/IP, Modbus/TCP and manufacturer host communication
-
Configuration connection3500 Rack Configuration and Data Acquisition software
-
Status indicationOK and TX/RX LEDs
-
Primary-register mappingConfigurable Modbus Register Utility
View all additional
Alternative Names
3500/92 136180-01 communication gateway
Bently Nevada 3500/92 136180-01
3500/92 136180 01 communication gateway
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
MACHINERY RACK COMMUNICATION MODULE
Integrating 3500/92 136180-01
The gateway transfers rack measurements and status information to process-control and automation systems using supported communications. It also supports manufacturer configuration and data-acquisition software connections. Actual returned data depend on the installed monitor types and channel configuration.
Match the gateway to its documented RS232/RS422, RS485 or Ethernet I/O. Older gateways require a firmware upgrade for newer I/O; the listed Ethernet I/O spares include kit 126M4118-01. Verify the host register map when replacing a 3500/90.
Install the matched main and rear modules and follow the 3500/92 manual for the chosen electrical interface and network. Check serial wiring or shielded Category 5 Ethernet cabling as applicable. Commission the intended addresses, protocol and register mapping before relying on transferred status.
Features:
- Match complete spare-part identity, module generation, rack position and mating input/output assembly
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3500/92 136180-01 communication gateway requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3500/92 136180-01 requires comparing complete spare-part identity, module generation, rack position and mating input/output assembly. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Match the gateway to its documented RS232/RS422, RS485 or Ethernet I/O. Older gateways require a firmware upgrade for newer I/O; the listed Ethernet I/O spares include kit 126M4118-01. Verify the host register map when replacing a 3500/90.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3500/92 136180-01 communication gateway requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3500/92 136180-01 communication gateway must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.5x25.3x24cm
-
Shipping weight0.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/92 136180-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is the exact replacement identified?
The manufacturer spare table identifies 136180-01 as the 3500/92 communication gateway. Verify the selected rear interface, host protocol, register mapping and firmware. Similar connectors or a shared 3500 designation do not confirm equivalent wiring or software configuration. -
What is the function of this component?
The gateway transfers rack measurements and status information to process-control and automation systems using supported communications. It also supports manufacturer configuration and data-acquisition software connections. Actual returned data depend on the installed monitor types and channel configuration. -
Which installed components must be compatible?
Match the gateway to its documented RS232/RS422, RS485 or Ethernet I/O. Older gateways require a firmware upgrade for newer I/O; the listed Ethernet I/O spares include kit 126M4118-01. Verify the host register map when replacing a 3500/90. -
Where is this component used?
The manufacturer documents transfer of monitored values and rack status to process-control and automation systems. The gateway supplies communications rather than replacing the configured machinery monitors. -
What must be checked during installation?
Install the matched main and rear modules and follow the 3500/92 manual for the chosen electrical interface and network. Check serial wiring or shielded Category 5 Ethernet cabling as applicable. Commission the intended addresses, protocol and register mapping before relying on transferred status. -
Does a 3500/92 retain the original 3500/90 primary-value registers?
Not unchanged. The manufacturer states that 3500/92 supports the earlier interfaces and protocols except the primary-value Modbus registers. Its Configurable Modbus Register Utility can provide corresponding functionality after mapping is configured. -
Can older gateways accept new Ethernet I/O without review?
No. The official documentation says older communication gateways need a firmware upgrade to communicate with a new I/O module. Check the installed firmware and the 126M4118-01 kit requirements in the gateway manual.
READY TO VERIFY YOUR PART?
Get a 3500/92 136180-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
