PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3500 System
- 3500/42M 176449-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3500/42M 176449-02 Proximitor seismic monitor module
Bently Nevada 3500/42M 176449-02 is a Proximitor seismic monitor module for the Bently Nevada 3500/42M monitoring system. Process up to four proximity-transducer signals for radial vibration protection with the configured sensitivity, alert levels and danger setpoints. Use compatible Proximitor inputs to monitor thrust position, eccentricity or differential expansion while retaining the correct target and scale configuration. Confirm the exact article, installed interfaces and controlled commissioning record before ordering.
BEFORE YOU BUY
Confirm the complete Proximitor seismic monitor module
ACTUAL APPLICATIONS
Application context for 3500/42M 176449-02
Manufacturer documentation places the Proximitor Seismic Monitor Module in practical vibration applications. The three cases below describe different operating tasks in which 3500/42M 176449-02 performs its documented product-family role with the configured companion equipment.
- 01 · MINING & METALS
Govern mill-stand vibration during material entry
Across the roll bearings and stand housings, 3500/42M 176449-02 serves its documented function as a Proximitor Seismic Monitor Module. During material entry, the system uses this function to relate vibration response to the rolling pass, helping it show chatter or bearing change before product quality is affected. - 02 · WATER & WASTEWATER
Observe motor-pump alignment with Proximitor Seismic
Within the couplings, motor bearings and pump housings, 3500/42M 176449-02 serves its documented function as a Proximitor Seismic Monitor Module. During post-overhaul run, the system uses this function to evaluate coupled-machine vibration at operating speed, helping it confirm the train returns to its reference condition. - 03 · OIL & GAS
Control reciprocating compressor condition with Proximitor Seismic
At the control layer of the cylinder, rod-position and casing sensors, 3500/42M 176449-02 performs its assigned control role as a Proximitor Seismic Monitor Module. During process-gas transition, the system uses this function to associate mechanical signals with the compression cycle, helping it separate process influence from a developing mechanical fault.
Technical specifications for 3500/42M 176449-02
-
Product Model3500/42M 176449-02
-
Product ParametersProximitor seismic monitor module
-
In stock1 unit
-
ManufacturerBently Nevada
-
Spare Part Number176449-02 monitor assembly
-
Accepted SignalsProximity, velocity or acceleration
-
Input Channel CapacityOne to four transducer signals
-
Typical Power Consumption7.7 W during operation
-
Standard Input Impedance10 kΩ per applicable input
-
Radial Vibration Sensitivity3.94 or 7.87 mV/μm
-
Acceleration Sensitivity10 mV per m/s²
-
Buffered Output Impedance550 Ω short-circuit protected
-
Transducer Power Supply-24 V DC sensor excitation
-
Recorder Output4–20 mA per channel
-
Operating Temperature-30°C to +65°C
-
Storage Temperature-40°C to +85°C
-
Humidity Limit95% noncondensing environment
-
Rack Space RequirementOne full-height front slot
-
Monitor Dimensions24.13 × 2.44 × 24.18 cm
View all additional
Alternative Names
3500/42M 176449-02
176449-02
four-channel Proximitor monitor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3500/42M 176449-02 to the installed Bently Nevada 3500/42M monitoring system
Bently Nevada 3500/42M 176449-02 is a Proximitor seismic monitor module documented for the Bently Nevada 3500/42M monitoring system. Process up to four proximity-transducer signals for radial vibration protection with the configured sensitivity, alert levels and danger setpoints.
Use compatible Proximitor inputs to monitor thrust position, eccentricity or differential expansion while retaining the correct target and scale configuration. Confirm 7.7 w during operation, 10 kω per applicable input, mechanical location and the approved system configuration before connection.
Accept supported velocity or acceleration transducers for casing vibration and integrate the 4–20 mA recorder outputs with the documented plant monitoring system. Use qualified personnel, retain the official manufacturer instructions at the work location and save the final commissioning results with the equipment record.
Features:
- Exact identity: 3500/42M 176449-02
- Product class: Proximitor seismic monitor module
- Family: Bently Nevada 3500/42M monitoring system
The Bently Nevada 3500/42M 176449-02 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3500/42M 176449-02 configuration before exchange
Replace 3500/42M 176449-02 only after matching the full product identity, 7.7 w during operation, 10 kω per applicable input and installed system role. A similar family name or partial article number does not establish direct interchangeability.
Photograph the module label, rack or control-unit position, every connector, cable route, shield, earth point and companion module before removal. Compare the documented electrical and communication limits against the saved project or rack configuration.
After installation, restore the controlled configuration and complete the model-specific checks described in the official manufacturer document. Record status indications, diagnostics, signal or communication results and the final acceptance evidence before release.
Features:
- Match exact 3500/42M 176449-02 identity
- Confirm 10 kΩ per applicable input
- Record 4–20 mA per channel
The Bently Nevada 3500/42M 176449-02 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Technical values prepared for 3500/42M 176449-02
- Bently Nevada manufacturer pages attached
- Exact identity required before installation
Documentation for Bently Nevada 3500/42M 176449-02 must match the installed system and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24.13 × 2.44 × 24.18 cm
-
Shipping weight0.91 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/42M 176449-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which transducer channels can 3500/42M 176449-02 process?
The monitor accepts one to four supported proximity, velocity or acceleration signals; verify each channel type, sensitivity and I/O module before configuration. -
What should a distributor confirm for a 176449-02 spare quotation?
Confirm the full 3500/42M 176449-02 identity, required Prox/Seismic, Shaft Absolute or Prox/Velom I/O module, terminations, approvals and quantity. -
Can 176449-02 be installed with any 3500/42M rear I/O module?
No. Match the monitor application and configured transducer channels to the exact compatible internal, external or barrier I/O module listed by Bently Nevada. -
What input scaling must engineering review before replacing this monitor?
Review the configured measurement type and sensitivity, including radial vibration, thrust, eccentricity, differential expansion, REBAM, acceleration or velocity scaling. -
How should maintenance inspect a received 3500/42M monitor?
Check the 176449-02 label, connector condition, front-panel LEDs, buffered-output connectors, card edges, dimensions and shipping damage before rack insertion. -
What does the TX/RX LED verify during commissioning?
It indicates communication with other modules in the 3500 rack; also confirm OK and Bypass indications and the channel diagnostics in the rack configuration. -
Which recorder output should be checked after configuration?
Verify the individual 4–20 mA recorder value for each configured channel and ensure the connected load remains within the documented compliance range. -
What final tests are needed before returning the machine channel to service?
Confirm transducer power, gap or sensor bias, displayed measurement, alert and danger logic, buffered output, recorder current and saved 3500 diagnostics.
READY TO VERIFY YOUR PART?
Get a 3500/42M 176449-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
