PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 7200 Proximity Transducer Systems
- 21508-02-12-05-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
21508-02-12-05-02 product overview
Bently Nevada 21508-02-12-05-02 is a 7200-series reverse-mount proximity probe for noncontact shaft-vibration and position monitoring. The configured order code defines the probe construction, cable and connector arrangement for the installed channel.
Verify probe dimensions, driver compatibility, cable termination and environmental requirements before replacement. Follow the applicable installation procedure and verify gap voltage and channel response after commissioning.
Verify probe dimensions, driver compatibility, cable termination and environmental requirements before replacement. Follow the applicable installation procedure and verify gap voltage and channel response after commissioning.
BEFORE YOU BUY
Check the complete 21508-02-12-05-02 order and installed system
ACTUAL APPLICATIONS
21508-02-12-05-02 supports rotating-equipment monitoring projects
Bently Nevada monitoring systems use matched sensors, signal-conditioning equipment and monitor channels to protect rotating machinery. Verify the complete order code, installation and commissioning requirements for each project.
-
01 · SHAFT VIBRATION
Measure shaft vibration
Use the matched sensor channel to measure shaft vibration on rotating equipment. Verify gap, scaling, shielding and monitor input before service. -
02 · AXIAL POSITION
Monitor axial position
Use the proximity channel to monitor axial position or thrust movement. Confirm orientation, target material, operating gap and alarm limits during commissioning. -
03 · MACHINE PROTECTION
Protect rotating machinery
Use the configured channel for machinery protection and condition monitoring. Confirm the complete order code and monitor configuration before replacement.
Technical specifications for 21508-02-12-05-02
-
Product Model21508-02-12-05-02
-
Product Parameters7200 reverse-mount probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Probe Family7200 Series
-
Mounting ConfigurationReverse mount
-
Probe Tip Diameter8 mm
-
Case Thread3/8-24
-
Base Probe Code21508-02-12
-
Cable Length Option05: 0.5 metre (20 inches)
-
Connector Option02: Miniature male coaxial connector
-
Measurement PrincipleEddy-current proximity
-
Compatible System7200 5 mm and 8 mm
-
Installation CheckMatch probe and Proximitor configuration
View all additional
Alternative Names
21508-02-12-05-02
7200 8 mm reverse-mount probe
0.5 m coaxial proximity probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
7200 PROXIMITY PROBE ARCHITECTURE
Match the legacy probe suffix to the installed 7200 system
Bently Nevada 21508-02-12-05-02 is a 7200 Series proximity probe identified by its complete ordering suffix. The suffix must be matched to the installed mechanical dimensions, integral cable and connector arrangement.
The probe works as part of a proximity transducer chain with the compatible extension cable and Proximitor electronics. System length, target material and calibration family must remain consistent.
Record the original probe label, thread, case length, cable length and connector before replacement. Legacy 7200 and later 3300 XL components should not be mixed without documented compatibility.
Features:
- Complete legacy probe: 21508-02-12-05-02
- Match the installed 7200 transducer chain
- Verify thread, cable and calibration family
The Bently Nevada 21508-02-12-05-02 7200 Series proximity probe requires the complete 7200 probe suffix, mechanical dimensions, system length, connector and calibration family to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Bently Nevada 21508-02-12-05-02 must be replaced only with a unit matching the complete 7200 probe suffix, mechanical dimensions, system length, connector and calibration family. A similar family name does not establish interchangeability.
Record the installed label, mounting arrangement, wiring or cable details, connected monitor and approval requirements before removing the existing 7200 Series proximity probe.
Verify the manufacturer documentation for the proposed replacement and recheck the installed gap, mounting, wiring and monitor configuration before commissioning.
Features:
- Match the complete model and suffix
- Check mounting, cable and monitor interfaces
- Revalidate wiring and measurement configuration
The Bently Nevada 21508-02-12-05-02 7200 Series proximity probe requires replacement verification of the complete identifier, mounting, wiring, connected system and approval requirements before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The documents below provide applicable technical information for the Bently Nevada 21508-02-12-05-02 7200 Series proximity probe. Confirm the supplied item and document availability in the written quotation.
Features:
- Available Bently Nevada document references are confirmed before order
- Match the complete model suffix and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 21508-02-12-05-02 7200 Series proximity probe must be matched to the complete identifier and installed system; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm in written quote
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 21508-02-12-05-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does base code 21508-02-12 identify?
It identifies the 7200 Series 8 mm reverse-mount probe configuration. -
What cable length does option 05 provide?
It provides a 0.5-metre cable, approximately 20 inches. -
Which connector is selected by option 02?
It specifies a miniature male coaxial connector. -
What mounting thread is used?
The documented reverse-mount configuration uses a 3/8-24 thread. -
Can this probe be used with a 3300 XL Proximitor Sensor?
Do not mix families without engineering confirmation; this probe belongs to the legacy 7200 system. -
What must be matched before replacement?
Confirm probe model, cable length, connector and the installed 7200 Proximitor Sensor. -
What should be inspected on receipt?
Check the 8 mm tip, reverse-mount body, thread, cable and coaxial connector. -
What commissioning checks are required?
Set the operating gap, verify gap voltage, scaling and channel response before service.
READY TO VERIFY YOUR PART?
Get a 21508-02-12-05-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
