PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 990 and 991 Transmitter
- 991-06-70-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Axial position loop transmitter
Bently Nevada 991-06-70-02-05 is a thrust position transmitter associated with the 991 transmitter family. It converts axial shaft position from a compatible proximity transducer into a two-wire current-loop signal. Internal signal conditioning supports connection to a control system without a separate external Proximitor Sensor.
This order selects a 0.6-0-0.6 mm position range, seven-metre transducer system and bulkhead mounting. Check the delivered approval marking and matching NSv probe arrangement; external zero and span controls must be set for the installation.
This order selects a 0.6-0-0.6 mm position range, seven-metre transducer system and bulkhead mounting. Check the delivered approval marking and matching NSv probe arrangement; external zero and span controls must be set for the installation.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 991 transmitter family
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · COMPRESSOR MONITORING
Compressor thrust position
The loop signal provides axial position information to the compressor control system. Verify the complete 991-06-70-02-05 configuration for the installed system. -
02 · PUMP SUPERVISION
Pump axial movement
A compatible NSv sensing chain supplies a continuous position signal for the control-system input. Verify the complete 991-06-70-02-05 configuration for the installed system. -
03 · MACHINE CONTROL
Small machine monitoring channels
The manufacturer documents use with small motors and fans; select the appropriate conductive target, sensing chain and control-system interpretation. Verify the complete 991-06-70-02-05 configuration for the installed system.
Technical specifications for 991-06-70-02-05
-
Product Model991-06-70-02-05
-
Spare Model991
-
Product ParametersAxial position loop transmitter
-
In stock4 units
-
ManufacturerBently Nevada
-
Full-scale range0.6-0-0.6 mm
-
Transducer system length7.0 m
-
Mounting hardwareBulkhead screws
-
Approval option05; verify delivered certification
-
Measurement output4-20 mA two-wire current loop
-
Terminal supply+12 to +35 VDC
-
Maximum loop resistance1000 ohm at 35 VDC
-
Typical current limit23 mA
-
Not-OK outputLess than 3.6 mA
-
Buffered probe outputPROX OUT; not electrically isolated
-
Signal conditioningInternal Proximitor circuitry
-
Compatible sensing family3300 NSv; matched system length required
-
Operating temperature-35 to +85 deg C
-
Storage temperature-51 to +100 deg C
-
Calibration adjustmentsIndependent zero and span potentiometers
View all additional
Alternative Names
991 06 70 02 05
991-06-70-02-05 thrust position transmitter
Bently Nevada 991-06-70-02-05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
AXIAL POSITION LOOP TRANSMITTER
Integrating 991-06-70-02-05
It converts axial shaft position from a compatible proximity transducer into a two-wire current-loop signal. Internal signal conditioning supports connection to a control system without a separate external Proximitor Sensor.
Match the NSv probe and any extension cable to the transmitter system-length setting. The loop output is a process signal, not a complete machinery-protection rack; compare measurement type and range before substitution.
Verify loop supply and load together. PROX OUT is not isolated from the measuring circuit; use the documented 122115-01 test adapter when connecting grounded AC-powered test equipment to avoid disturbing the signal.
Features:
- Match complete order, mounting, connections and environmental limits
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 991-06-70-02-05 thrust position transmitter requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 991-06-70-02-05 requires comparing complete order, mounting, connections and environmental limits. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Match the NSv probe and any extension cable to the transmitter system-length setting. The loop output is a process signal, not a complete machinery-protection rack; compare measurement type and range before substitution.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 991-06-70-02-05 thrust position transmitter requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 991-06-70-02-05 thrust position transmitter must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size10x7.4x6 cm
-
Shipping weight0.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 991-06-70-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 991-06-70-02-05?
It converts axial shaft position from a compatible proximity transducer into a two-wire current-loop signal. Internal signal conditioning supports connection to a control system without a separate external Proximitor Sensor. -
Which options identify this 991 configuration?
This order selects a 0.6-0-0.6 mm position range, seven-metre transducer system and bulkhead mounting. Check the delivered approval marking and matching NSv probe arrangement; external zero and span controls must be set for the installation. -
Which system compatibility checks are required?
Match the NSv probe and any extension cable to the transmitter system-length setting. The loop output is a process signal, not a complete machinery-protection rack; compare measurement type and range before substitution. -
Where is the documented product family applied?
A compatible NSv sensing chain supplies a continuous position signal for the control-system input. -
What installation precautions apply to this configuration?
Verify loop supply and load together. PROX OUT is not isolated from the measuring circuit; use the documented 122115-01 test adapter when connecting grounded AC-powered test equipment to avoid disturbing the signal. -
Can a similar part number be substituted directly?
No. Compare complete order, mounting, connections and environmental limits. Match the NSv probe and any extension cable to the transmitter system-length setting. The loop output is a process signal, not a complete machinery-protection rack; compare measurement type and range before substitution. -
Are hardware revisions or a direct successor confirmed?
No exact-order hardware revision, discontinuation date or manufacturer-designated successor has been verified. The reference document revision is not the supplied product hardware revision.
READY TO VERIFY YOUR PART?
Get a 991-06-70-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
