AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Friday, June 5
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for TK3-2E
-
Product ModelTK3-2E
-
Spare Model14700-02A
-
Product ParametersTK3 Proximity System Test Kit
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size28.5x20x23cm
-
ManufacturerBently Nevada
-
Weight6.02 kg
-
Power Electric95- 125 Vac, 50/60 Hz, 1A minimum / 190 - 250 Vac, 50/60 Hz, 1A minimum
-
Inputs Air90 psi (6.2 bar) maximum
-
Vibration Amplitude Range50 μm to 254 μm (2 to 10 mils) peak-to-peak
-
Maximum Speed Electric0 to 10,000 cpm +2,500 cpm
-
Air0 to 5,000 cpm +1,000 cpm
Description
The TK-3 Proximity System Test Kit simulates shaft vibrationand position for calibrating Bently Nevada monitors. It verifiesthe operating condition of the monitor readouts as well as thecondition of the proximity transducer system. A properlycalibrated system ensures that the transducer inputs and theresulting monitor readings are accurate.
Vibration monitors are calibrated using the motor-drivenwobble plate. A swing-arm assembly located over thewobble plate holds the proximity probe in place. Thisassembly uses a universal probe mount, identical to thatused with the spindle micrometer assembly. By using theabsolute scale factor of the proximity probe in conjunctionwith a multimeter, the user adjusts the probe to find aposition where the desired amount of mechanical vibration(as determined by peak-to-peak DC voltage output) ispresent. No oscilloscope is needed.
Vibration monitors are calibrated using the motor-drivenwobble plate. A swing-arm assembly located over thewobble plate holds the proximity probe in place. Thisassembly uses a universal probe mount, identical to thatused with the spindle micrometer assembly. By using theabsolute scale factor of the proximity probe in conjunctionwith a multimeter, the user adjusts the probe to find aposition where the desired amount of mechanical vibration(as determined by peak-to-peak DC voltage output) ispresent. No oscilloscope is needed.
Alternative Names
TK3 2E
TK3/2E
TK3
Information
Overview
Manuals
User guide
Product Applications
Initial Instrument Bench Setup & Power Configuration
Features:
- Adjustable Stop Set Screw
- Keyphasor Probe Holder
- Speed Control Knob
The Bently Nevada TK3-2E uses a removable spindle micrometer assembly to check the transducer system and position monitor calibration. This assembly on the Bently Nevada TK3-2E features a universal probe mount that accommodates probe diameters from 5mm to 19mm (0.197in to 0.75in). The mount on the Bently Nevada TK3-2E holds the probe while the user moves the target toward or away from the probe tip in calibrated increments. The user records the output from the Proximitor Sensor using a voltmeter. The spindle micrometer assembly on the Bently Nevada TK3-2E also features a magnetic base for ease of use in the field.
The TK3-2E Bently Nevada Calibration Instrument may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada TK3-2E Calibration Instrument Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The user can then compare a vibration monitor's reading to the known mechanical vibration signal input viewed by the proximity probe. The Bently Nevada TK3-2E provides a known mechanical vibration reference for verifying monitor accuracy. The Bently Nevada TK3-2E is for indoor use only. The maximum altitude for the Bently Nevada TK3-2E is 2000m.
The Bently Nevada TK3-2E has an operational temperature range of 0°C to 50°C (32°F to 122°F). Temporary operation below minimum temperature is acceptable for the Bently Nevada TK3-2E. For extended continuous use, the maximum operating temperature of the Bently Nevada TK3-2E is 40°C. The storage temperature range of the Bently Nevada TK3-2E is -18°C to 65°C (0°F to 150°F). The Bently Nevada TK3-2E operates in 95% non-condensing humidity. The Bently Nevada TK3-2E is rated to meet IP54 for dust and water exposure when closed.
- Power Generation: Ensuring early fault detection on massive turbine-generator shafts
- Oil & Gas Processing: Verifying safety trip and alarm systems on high-speed critical compressors
- Chemical & Refining: Protecting rotating assets in hostile processing environments
- Industrial Automation R&D: Allowing engineers to benchmark and validate new transducer installations
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Voltage Selection: Prior to plugging in the unit, the 115/230 VAC selector switch on the front panel must be checked and set to match the local line voltage to avoid permanent circuit damage.
Environmental Constraints: The TK3-2E is rated exclusively for indoor use or controlled field environments, up to a maximum altitude of 2,000 meters and a maximum temperature of 40°C.Safety Clearing: The kit must be placed on a flat, stable surface. Technicians must keep all loose clothing, jewelry, and fingers clear of the exposed, rotating wobble plate.
Technical notes
Vibration monitors are calibrated using the motor-drivenwobble plate. A swing-arm assembly located over thewobble plate holds the proximity probe in place. Thisassembly uses a universal probe mount, identical to thatused with the spindle micrometer assembly. By using theabsolute scale factor of the proximity probe in conjunctionwith a multimeter, the user adjusts the probe to find aposition where the desired amount of mechanical vibration(as determined by peak-to-peak DC voltage output) ispresent. No oscilloscope is needed.
FAQs
-
What is the TK3-2E?+The Bently Nevada TK3-2E is an electrically powered calibration instrument used to simulate shaft vibration and position, calibrate machinery monitors, and verify the accuracy of proximity transducer systems in industrial environments
-
What is the primary purpose of the TK3-2E?+It provides a reference mechanical motion to perform field functional tests of machinery protection systems. It ensures your proximity probes, extension cables, and monitors work accurately as a complete system.
-
Does the unit require an external power source?+Yes, the TK3-2E is electrically powered and requires an input of 95–125 Vac or 190–250 Vac (50/60 Hz, 1A minimum).
-
What is the difference between the TK3-2E and the TK3-2G?+Both models perform the same calibration functions but utilize different power sources. The TK3-2E uses electricity, whereas the TK3-2G is pneumatically powered (using pressurized air) to ensure safety in explosive or flammable environments.
-
What are the electrical power requirements for the TK3-2E?+The device operates on a universal dual-voltage layout. It requires a power supply of either 95–125 Vac or 190–250 Vac, at 50/60 Hz, with a minimum current of 1A. You must set the 115/230 VAC selection switch to the correct position before plugging it in to avoid damaging the unit.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN