PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- AM3100T2-Z2-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
AM3100T2-Z2-00 IEPE Accelerometer
Bently Nevada AM3100T2-Z2-00 is an IEPE Accelerometer in the Bently Nevada family. It converts casing acceleration into an IEPE voltage signal for machinery vibration monitoring and condition assessment.
The ordered build specifies nominal sensitivity of 100 mV/g +/-5%, measurement range of 80 g peak, amplitude nonlinearity of 1%, frequency response of 0.4 to 14000 Hz at +/-3 dB, resonant frequency of 30 kHz, and transverse sensitivity of 5% maximum. These values define the supplied configuration and should be matched to the installed measurement system.
The ordered build specifies nominal sensitivity of 100 mV/g +/-5%, measurement range of 80 g peak, amplitude nonlinearity of 1%, frequency response of 0.4 to 14000 Hz at +/-3 dB, resonant frequency of 30 kHz, and transverse sensitivity of 5% maximum. These values define the supplied configuration and should be matched to the installed measurement system.
BEFORE YOU BUY
Confirm the complete industrial iepe accelerometer
ACTUAL APPLICATIONS
Application fields for AM3100T2-Z2-00
AM3100T2-Z2-00 is applicable across the following broad industrial fields, subject to verified project requirements.
-
01 · AUTOMOTIVE
Vehicle and Automotive Supply Sector
Automotive Supply SectorNew Energy Mobility Sector -
02 · PHARMACEUTICAL
Pharmaceutical and Life Science Product Manufacturing
Medical Material ProductionActive Pharmaceutical Ingredients -
03 · AEROSPACE
Aerospace Manufacturing and Aviation Support Industries
Aerospace Industry SectorAviation Support Infrastructure
Technical specifications for AM3100T2-Z2-00
-
Product ModelAM3100T2-Z2-00
-
Product ParametersIEPE Accelerometer
-
In stock1 unit
-
ManufacturerBently Nevada
-
Nominal sensitivity100 mV/g +/-5%
-
Measurement range80 g peak
-
Amplitude nonlinearity1%
-
Frequency response0.4 to 14000 Hz at +/-3 dB
-
Resonant frequency30 kHz
-
Transverse sensitivity5% maximum
-
Supply voltage18 to 30 V DC
-
Constant current2 to 10 mA
-
Operating temperature-55 to +120 deg C
-
Housing material316L stainless steel
-
Environmental sealHermetic
-
Electrical isolationCase isolated
-
Mounting thread1/4-28
-
Connector arrangementTop exit, 2-pin MIL-C-5015 style
-
Base modelAM3100T2-Z2
View all additional
Alternative Names
AM3100T2-Z2-00
AM3100T2-Z2
Bently Nevada 100 mV/g IEPE accelerometer
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate AM3100T2-Z2-00 industrial iepe accelerometer
Integrate AM3100T2-Z2-00 only within the compatible Bently Nevada vibration sensor. The complete code must agree with the mating sensor chain, mounting arrangement and signal-conditioning hardware.
The decoded build includes 100 mV/g sensitivity, 80 g peak range and 1/4-28 mounting. Preserve the documented cable and connector routing and keep the measurement chain matched to the installed monitor.
The remaining order information specifies top-exit two-pin connection, case isolation and requested -00 suffix. Apply the family electrical and environmental limits without assigning unresolved wildcard fields a value.
Features:
- Complete order-code configuration retained
- Matched sensing-chain compatibility checked
- Documented electrical limits applied
The AM3100T2-Z2-00 industrial iepe accelerometer requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify AM3100T2-Z2-00 industrial iepe accelerometer
Record the full AM3100T2-Z2-00 label before removal. Compare all option positions, mechanical interfaces, connectors and approval markings with the offered replacement.
Inspect the mating connectors, cable condition and mounting hardware while the channel is isolated. Replace damaged ancillary parts only when they are listed in the quotation.
After installation, verify the expected signal, channel status and physical clearances. A matching base number alone does not confirm a compatible complete configuration.
Features:
- Full installed label captured before removal
- Mechanical and connector options compared
- Channel signal verified after installation
The AM3100T2-Z2-00 industrial iepe accelerometer requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify the official document identity before installation
- Match every order-code position to the supplied item
- Accessories are included only when listed
Documentation for the AM3100T2-Z2-00 industrial iepe accelerometer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size4.56 × 1.91 × 1.91 cm
-
Net weight0.062 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about AM3100T2-Z2-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the complete AM3100T2-Z2-00 order identify?
It identifies a Bently Nevada Industrial IEPE accelerometer. Every suffix and any MOD reference must be retained when checking the supplied item. -
Which technical value is most important for AM3100T2-Z2-00?
The decoded value is Nominal sensitivity: 100 mV/g +/-5%. Check it together with the full order code rather than using the family name alone. -
Can AM3100T2-Z2-00 be replaced by a similar base number?
No automatic interchangeability is established. Compare the complete ordering code, connection arrangement, system length and approval option. -
Which documentation applies to AM3100T2-Z2-00?
Use the linked Bently Nevada family document and confirm that its ordering table includes the exact product family and option positions. -
What should be recorded before removing AM3100T2-Z2-00?
Record the full label, installed connection arrangement, cable routing, mating parts and any hazardous-area markings before removal. -
How should AM3100T2-Z2-00 be checked after installation?
Confirm mechanical fit, connector condition, cable routing and the expected monitored signal before returning the channel to service. -
Does the quotation for AM3100T2-Z2-00 include accessories?
Only accessories expressly listed in the written quotation are included; request each required bracket, protector, fitting or mating part separately. -
Why must the suffixes on AM3100T2-Z2-00 remain unchanged?
They distinguish physical and approval options that may not be visible from the base family number and can affect installation compatibility.
READY TO VERIFY YOUR PART?
Get a AM3100T2-Z2-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
AM3100T2-Z2-00IEPE AccelerometerManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
