PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
DS822.OD110 Eddy Current Sensor Driver
Bruel & Kjaer DS822.OD110 is an eddy current sensor driver in the ds822 ATEX range. It is the oscillator/demodulator used with the documented ds822 eddy-current displacement sensor chain. The series supports machine protection and condition monitoring in hazardous environments.
The driver excites the matched sensor and converts the gap-dependent signal into an analog voltage. Its automatic system-length selection supports the documented 5 m and 10 m chains. Use the matching probe and extension cable, preserve the specified power polarity and apply the hazardous-location limits for the complete certified chain.
The driver excites the matched sensor and converts the gap-dependent signal into an analog voltage. Its automatic system-length selection supports the documented 5 m and 10 m chains. Use the matching probe and extension cable, preserve the specified power polarity and apply the hazardous-location limits for the complete certified chain.
BEFORE YOU BUY
Confirm the complete eddy current sensor driver
ACTUAL APPLICATIONS
Application context for DS822.OD110
DS822.OD110 is an eddy current sensor driver in the ds822 ATEX range. It serves power generation, oil & gas, chemical processing. Suitability depends on the selected process, electrical ratings and installed configuration.
-
01 · POWER GENERATION
Steam Turbine and Electric Power Generation
Steam Turbine Power GenerationHydroelectric Turbine Power Generation -
02 · OIL & GAS
Oil Refining and Natural Gas Processing
Refinery Compression and ProcessingNatural Gas Compression Operations -
03 · CHEMICAL PROCESSING
Chemical Manufacturing and Industrial Process Production
Industrial Chemical ProductionPetrochemical Processing and Production
Technical specifications for DS822.OD110
-
Product ModelDS822.OD110
-
Product ParametersEddy Current Sensor Driver
-
In stock6 units
-
ManufacturerBruel & Kjaer
-
Nominal system lengths5 m or 10 m
-
System measuring span2 mm
-
System incremental scale factor-8 mV/µm
-
Nominal supply voltage-24 V DC
-
Permitted supply range-18 to -28 V DC
-
Maximum operating current12 mA with load ≥100 kΩ
-
Dynamic output resistance50 Ω
-
System frequency responseDC to 10 kHz at -3 dB
-
Housing materialADC12 aluminium alloy
-
Driver enclosure protectionIP20
-
Driver operating temperature-55 to +85 ℃, hazardous-area limits apply
-
Storage temperature-20 to +70 ℃ in original packaging
-
Relative humidity limit100% non-condensing with protected connectors
-
Signal connectorPush-pull self-latching coaxial SAA
-
Power source current limit1 A maximum, short-circuit proof
View all additional
Alternative Names
DS822.OD110
ds822 ATEX Eddy Current Sensor Driver
ATEX 5 m or 10 m nominal system lengths
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate DS822.OD110 eddy current sensor driver
Bruel & Kjaer DS822.OD110 is a eddy current sensor driver in the ds822 ATEX range. It is the oscillator/demodulator used with the documented ds822 eddy-current displacement sensor chain. The series supports machine protection and condition monitoring in hazardous environments.
The driver excites the matched sensor and converts the gap-dependent signal into an analog voltage. Its automatic system-length selection supports the documented 5 m and 10 m chains. Use the matching probe and extension cable, preserve the specified power polarity and apply the hazardous-location limits for the complete certified chain.
Use the applicable ds822 ATEX documentation for DS822.OD110. Verify the complete configuration, connection assignments and environmental limits, then record the functional checks before commissioning.
Features:
- Nominal system lengths: 5 m or 10 m
- System measuring span: 2 mm
- System incremental scale factor: -8 mV/µm
The DS822.OD110 eddy current sensor driver requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify DS822.OD110 eddy current sensor driver
Identify the complete DS822.OD110 nameplate and the installed ds822 ATEX configuration before replacement. Match all connectors and the documented electrical ratings.
The driver excites the matched sensor and converts the gap-dependent signal into an analog voltage. Its automatic system-length selection supports the documented 5 m and 10 m chains. Use the matching probe and extension cable, preserve the specified power polarity and apply the hazardous-location limits for the complete certified chain.
After fitting DS822.OD110, restore the recorded configuration and verify every affected signal or communication path. Retain diagnostic results and the acceptance record.
Features:
- Nominal system lengths: 5 m or 10 m
- System measuring span: 2 mm
- System incremental scale factor: -8 mV/µm
The DS822.OD110 eddy current sensor driver requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the DS822.OD110 eddy current sensor driver must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.65 × 8.3 × 6cm
-
Shipping weight0.20kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about DS822.OD110
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is DS822.OD110 the probe or the driver?
DS822.OD110 is the driver/oscillator-demodulator; the displacement probe and extension cable are separate chain components. -
Can the same driver serve five- and ten-metre chains?
Yes. DS822.OD110 supports the documented 5 m and 10 m nominal system lengths with matching components. -
What supply polarity does the eddy-current driver need?
The nominal supply of DS822.OD110 is -24 V DC; the permitted range is -18 to -28 V DC. -
What measuring span belongs to the documented ds822 chain?
The associated DS822.OD110 2 mm system measures displacement with the documented -8 mV/µm scale factor. -
Is the driver enclosure suitable for exposed outdoor use?
DS822.OD110 has IP20 protection and requires the documented protective installation; probe-tip protection is a separate rating. -
What frequency response applies to the complete measuring chain?
The documented DS822.OD110 system response is DC to 10 kHz at -3 dB. -
Which chain details identify a driver quotation?
Specify DS822.OD110, probe code, extension cable, total chain length and hazardous-area requirement. -
What should be verified before connecting a received driver?
Inspect the DS822.OD110 identity and coaxial connector, then verify supply polarity, complete chain length and calibration record.
READY TO VERIFY YOUR PART?
Get a DS822.OD110 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
