PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
F312 12-drop fieldbus Megablock
F312 is a 12-drop DIN-rail passive fieldbus hub for FOUNDATION Fieldbus H1 and Profibus PA segments in general-purpose, Zone 2 and Division 2 applications. The model identity, electrical limits and compatible system must be confirmed before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete 12-drop fieldbus Megablock
ACTUAL APPLICATIONS
Application context for F312
The applications below show typical industry settings, application scenarios, application areas and equipment for F312. Confirm the exact product configuration before use.
-
01 · OIL & GAS
Fieldbus junction boxes on process skids
Process unitsPressure and flow transmittersControl valve positioners -
02 · CHEMICAL PROCESSING
Zone 2 instrument segment distribution
Process unitsReactor instrumentation loopsTank-farm field devices -
03 · WATER & WASTEWATER
Profibus PA spur distribution
Plant areas servedChemical dosing instrumentsFilter-gallery transmitters
Technical specifications for F312
-
Product ModelF312
-
Product Parameters12-drop fieldbus Megablock
-
In stock1 unit
-
ManufacturerEATON
-
Spur count12 drops
-
Network supportFOUNDATION Fieldbus H1 and Profibus PA
-
Hub typePassive fieldbus Megablock
-
Mounting35 mm DIN rail
-
Installation orientationVertical or horizontal
-
Hazardous locationZone 2 and Division 2
-
Spur protectionShort-circuit protection per spur
-
Power indicatorGreen LED at 10 V DC or higher
-
Trunk connectorRemovable screw terminal
-
TerminatorF97 terminator supplied
-
Terminal capacity0.14 to 2.5 mm² conductors
-
Operating temperature-40 to +70 °C
-
Humidity0 to 95% RH non-condensing
-
Ingress installationInstall within a suitable enclosure
View all additional
Alternative Names
F312
MTL F300 Megablocks 12-drop fieldbus Megablock
Eaton 12-drop fieldbus Megablock
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match F312 to the installed MTL F300 Megablocks
Eaton F312 is a 12-drop fieldbus Megablock for the MTL F300 Megablocks. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare mounting (35 mm DIN rail), installation orientation (Vertical or horizontal) and hazardous location (Zone 2 and Division 2) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: F312
- Product class: 12-drop fieldbus Megablock
- Family: MTL F300 Megablocks
The Eaton F312 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete F312 identity before exchange
Replace F312 only after matching the complete article code, 12-drop fieldbus Megablock, installed MTL F300 Megablocks role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: F312
- Product class: 12-drop fieldbus Megablock
- Family check: MTL F300 Megablocks
The Eaton F312 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for F312
- Eaton MTL F300 Megablocks references reviewed
- Exact Eaton identity required before service
Documentation for Eaton F312 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size22 × 10 × 15 cm
-
Shipping weight0.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85369090
-
OriginUnited Kingdom
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about F312
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What makes F312 fit the commissioning retrofit task?
For F312 during retrofit planning, a commissioning engineer should match spur count (12 drops) and network support (FOUNDATION Fieldbus H1 and Profibus PA) to the installed MTL F300 Megablocks design. A mismatch can prevent correct integration even when the hardware appears similar. -
Receiving F312 for commissioning retrofit: check FOUNDATION Fieldbus H1 and network support?
For retrofit planning, identify F312 by the combined specification: network support is FOUNDATION Fieldbus H1 and Profibus PA, while hub type is Passive fieldbus Megablock. A commissioning engineer should confirm both values rather than relying on the family name or enclosure. -
Commissioning retrofit: does F312 match Passive fieldbus Megablock?
Before wiring or mounting F312, a commissioning engineer should verify the installation supports hub type of Passive fieldbus Megablock and preserves the documented mounting of 35 mm DIN rail. Record this check in the retrofit planning work pack. -
Confirming F312 mounting during commissioning retrofit?
During retrofit planning, a commissioning engineer should commission F312 under a controlled load or signal and confirm mounting reaches 35 mm DIN rail. Cross-check installation orientation against Vertical or horizontal, then save the measured result for engineering acceptance. -
F312 installation orientation: Vertical or horizontal or another value — commissioning retrofit?
During retrofit planning, a commissioning engineer should isolate the circuit, compare the actual installation orientation with the F312 specification of Vertical or horizontal, and inspect the related hazardous location requirement (Zone 2 and Division 2). This separates a module fault from a supply, wiring, or configuration issue. -
F312 selection check for commissioning retrofit: hazardous location?
For retrofit planning, the F312 service record should state hazardous location as Zone 2 and Division 2 and retain spur protection at Short-circuit protection per spur. These values give a commissioning engineer a repeatable baseline for later replacement and fault diagnosis. -
Distributor commissioning retrofit evidence for F312: spur protection?
For a commissioning engineer's retrofit planning request, the quotation should identify the complete F312 code and confirm spur protection (Short-circuit protection per spur) together with power indicator (Green LED at 10 V DC or higher). The distributor should flag any revision or substitute that changes either requirement. -
F312 power indicator for MRO commissioning retrofit?
For a commissioning engineer's retrofit planning requirement, check the delivered F312 label and order code, then verify power indicator is Green LED at 10 V DC or higher and spur count is 12 drops. Photograph the label and connectors before acceptance so purchasing and maintenance share the same identity record.
READY TO VERIFY YOUR PART?
Get a F312 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
