

























Analog Output Module
Series:VersaMax
Part Number:IC200ALG331-BA
Description:Analog output module
Channel:4
Digital resolution:16 bits
Voltage:-10-10 Volts DC
Compatible signals:4-20 mA; - / +10VDC
Current:4-20 milliamperes
Update Time:7 milliseconds
Isolation Input to Logic:250 Volts AC
External Power supply:18-30 VDC
Isolation Input to Ground:1500 Volts AC for 60 seconds
Module width:Single slot
LED indicators:FLD PWR LED; OK LED
Analog Output Module
Series:VersaMax
Part Number:IC200ALG331-AA
Description:Analog output module
Channel:4
Digital resolution:16 bits
Voltage:-10-10 Volts DC
Compatible signals:4-20 mA; - / +10VDC
Current:4-20 milliamperes
Update Time:7 milliseconds
Isolation Input to Logic:250 Volts AC
External Power supply:18-30 VDC
Isolation Input to Ground:1500 Volts AC for 60 seconds
Module width:Single slot
LED indicators:FLD PWR LED; OK LED
Analog Input Module
Manufacturer:GE Fanuc
Series:Versamax
Part Number:IC200ALG240-EC
Product Type:Analog Input Module
Number of Inputs:8
Intelligent Module:Yes
Input Data:16-Bit Input Data
Operating Modes:Current Mode or Voltage Mode
Current Range:1 to 20 milliamps
Voltage Range:-10 to 10 Volts DC
Analog Input Module
Manufacturer:GE Fanuc
Series:Versamax
Part Number:IC200ALG240-EB
Product Type:Analog Input Module
Number of Inputs:8
Intelligent Module:Yes
Input Data:16-Bit Input Data
Operating Modes:Current Mode or Voltage Mode
Current Range:1 to 20 milliamps
Voltage Range:-10 to 10 Volts DC
Analog Input Module
Manufacturer:GE Fanuc
Series:Versamax
Part Number:IC200ALG240-DB
Product Type:Analog Input Module
Number of Inputs:8
Intelligent Module:Yes
Input Data:16-Bit Input Data
Operating Modes:Current Mode or Voltage Mode
Current Range:1 to 20 milliamps
Voltage Range:-10 to 10 Volts DC
Analog Input Module
Manufacturer:GE Fanuc
Series:Versamax
Part Number:IC200ALG240-BB
Product Type:Analog Input Module
Number of Inputs:8
Intelligent Module:Yes
Input Data:16-Bit Input Data
Operating Modes:Current Mode or Voltage Mode
Current Range:1 to 20 milliamps
Voltage Range:-10 to 10 Volts DC
Filler Module
Module Type:I/O Filler Module
Part Number:1C200ACC301A
Compatibility:VersaMax PLC Systems
Operating Temperature:0°C to 60°C
Storage Temperature:-40°C to 85°C
Humidity:5% to 95% non-condensing
CPU 331 Module
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693CPU331
Product Description:Modular CPU
Product type:CPU module
Processor type:80188
Clock speed:10 Megahertz
Typical scan rate:0.4 ms per 1K of Boolean logic
Processor speeds:10 MHz
Timers / Counters:680
Current load:350mA
Bus voltage:+5VDC
Slot 1 I/O module
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693CHS391M
Description:Expansion baseplate
Product Description:Modular CPU baseplate
Current:420 milliAmperes
No. of slots:Ten (10) slots
Voltage:5 Volts DC
No. of CPU slots:One (1)
Connector:25-Pin female
No. of I/O slots:Nine (9)
High Speed Counter Module
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693APU300D
Product Description:High-Speed Counter (HSC) module
No of input channels:Twelve (12) positive logic inputs
Maximum Count Rate:80 kiloHertz
Input signal voltage:5 VDC; 10VDC - 30 VDC
Minimum Count Rate:20 kiloHertz
Input frequency:8 kHz
Input/Output Type:Positive Logic
No. of Logic Inputs:12
Maximum count rate:up to 200 kHz
Output Voltage Range:4.7 to 40 Volts DC
LED indicators:BOARD OK and CONFIG OK
Isolation:250 Volts AC
Power Consumption:250 mA at 5 Volts DC
Analog output module
Series:PACSystem RX3i
Manufacturer:Emerson Automation
Part Number:IC695ALG728
Product Description:Non-isolated analog output module
Number of Channels:8
No of Channels:Eight (8) non-isolated
Voltage Range:0 to +10 Volts, -10 to +10 Volts
Output signals, Current:0-20 mA; 4-20 mA
Output signals:+/-10 VDC, 0-10 VDC; 0-20 mA, 4-20 mA
Current Range:0 to 20 milliamps, 4 to 20 milliamps
No. of HART Modems:Two (2)
External Current input::190 mA
Maximum current required:250mA
Maximum Output Load:850 Ohms
Current draw:340 mA maximum at 3.3V
PLC OUTPUT MODULE
Brand:GE Fanuc
Series:Series 90-30
Part Number:IC693MDL732
Product type:Digital I/O
Inrush current:4.78 Amps
Rated voltage:12 / 24 Volts DC
Peak input current:50 milliamps
Supply voltage:5 Volts DC
Output points:8
Peak output per point:0.5 Amps
TERMINAL BLOCK
Series:PACSystem RX3i
Manufacturer:GE Fanuc
Part Number:IC694TBB032
Product Description:Box style terminal block
Description:Terminal block
Terminals:36
Size:0.5 inches depth
Tightening Torque:7 lb-inch
Stripping length:0.310 inches of 7.87 mm
Wire size:14-26 AWG (solid or stranded)
Mounting:Chassis
Removable:Yes
Wire type:Solid or Stranded wire
ANALOG INPUT HART MODULE
Series:PACSystem RX3i
Manufacturer:Emerson Automation
Part Number:IC695ALG626
Product Description:Non-isolated analog input module
Module Type:Analog Input w/HART comms
HART Protocol:Supported; HART Version 5.0
Current Range:0 to 20mA, 4 to 20mA, ±20mA
Input signals, Current:0-20 mA; 4-20 mA; +/-20 mA;
Humidity:5 to 95%, non-condensing
Internal Power:3.3V: 600mA, 5V: 450 mA
Overvoltage:±60 VDC continuous, maximum
Overcurrent:±28mA continuous, maximum
Open Circuit Detection time:1 second maximum
Autocalibration:Performed during power-up
I/O MODULE
Series:Genius I/O
Part Number:IC660BBD020
Description:Sink I/O block
Product Description:Source Block I/O
Voltage:24/48 Volts
No. of I/O:16
Compatibility:90-30 PLCs
Load current:2 Amperes
Operating voltage:18-56 VDC
Input Impedance:1.7 ms with filter
Nominal voltage:24VDC / 48 VDC
Temperature:0-60 degrees Celsius
Circuit:16
Output response time:1.0 msec
Filter time:5 to 100mS
I/O MODULE
Series:Genius Block I/O
Part Number:IC660BBD024
Module type:Discrete block I/O
Input voltage:12/24VDC
Input Impedance:3.3k Ohms
Block output current (total):16 Amps
Output turn-on delay:0.5 ms, maximum
Output Diagnostics:Switch Fault
Description:Block I/O
TTL:5 Volts
Input points:32
Isolation:850 Volts
Temperature:0-60 degrees Celsius
Compatiblity:Series 90-30, 90-70
Programming Cable
IC690ACC901
DISCONTINUED BY MANUFACTURER
CONVERTER KIT
MINI
W/ CABLE RS-485/RS-232
CONVERTER CABLE
Manufacturer:GE Fanuc Emerson
Series:Series 90-30
Part Number:IC690USB901
Product:Converter Cable
Series 90-20 PLCs:Compatible
Molded Cable Ends:Yes
Length:3 meters
OUTPUT MODULE
IC600BF910
DISCONTINUED BY MANUFACTURER
OUTPUT MODULE
SERIES SIX
115VAC
W/TERMINAL COVER
EXPANDED LOGIC CONTROL MODULE
IC600CB526
DISCONTINUED BY MANUFACTURER
EXPANDED LOGIC CONTROL MODULE
SERIES SIX
CB526
MODULE BOARD
OUTPUT MODULE
IC600BF929
DISCONTINUED BY MANUFACTURER
OUTPUT MODULE
SERIES SIX
10-50VDC
W/ LIGHTS
32 POINTS
output module
Series:Series Six
Part Number:IC600BF929
Product Type:Output Module
Output Type:Source Outputs
High-Density Module:Yes
I/O Racks:Compatible
Series Six Plus CPU Racks:Compatible
Number of Outputs:32
Voltage:10-50V DC
I/O CONTROL MODULE
IC600CB527
DISCONTINUED BY MANUFACTURER
I/O CONTROL MODULE
SERIES SIX

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.