General Electric

printed circuit board

Input Voltage: 24V DC
Operating Temperature: Typically between -30°C to +65°C
Humidity: Typically 0-95% (non-condensing)

PACSystems RX3i Power Supply module

Part Number:IC695PSD140
Product Description:Power Supply module
Input voltage range:85 to 264 VAC 100 to 300 VDC
Power Supply:40 Watts
Nominal Rated Voltage:120/240 VAC or 125 VDC
Input Voltage Range:18 to 30 VDC
Input Power:60 Watts maximum at full load
Ripple:150 mV
Output Current:5.1 VDC
Noise:150 mV
Isolation:None
Number of Daisy-Chained PSD140:Up to 4
Terminal Current:6 Amps

RX3i Blank filler module

Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The anal

NETWORK INTERFACE MODULE

Brand:GE Fanuc
Series:Versamax
Part Number:IC200BEM003
Description:VersaMax master module
Data:3854 input/output
Data Rate:9.6 k baud to 12 M baud
Connector:9 Pin D-sub
Bus Voltage:5 Volts
Slave Devices:125

POWER SUPPLY

POWER SUPPLY
24 VDC
40 WATT
OCCUPIES ONE SLOT ON SYSTEM BASE

SR489P5LOA20
DISCONTINUED BY MANUFACTURER
GENERATOR MANAGEMENT RELAY
PHASE CURRENT INPUTS - 5 AMP
20-60 V DC
20-48 V AC
48/62 HZ
EIGHT 4-20 MA ANALOG OUTPUTS
BASIC DISPLAY

120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load -sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the backplane

I/O MODULE

Brand:GE Fanuc
Series:Genius I-O
Part number:IC660BRD020
Output circuits:16
Circuit type:Source
Weight:1.8 kilograms
Maximum ripple:10%

Station Manager Serial Cable for Ethernet TCP/IP

Brand:GE Fanuc
Series:Series 90-30
Part Number:IC693CBL316
Description:Serial Cable
Cable Length:3.0 Feet
Connector Type:9-pin D-shell connector and 6-pin RJ-11 Connector
Application:90-30 Series CPU and Digital Servo Modules
Wire Shield:Yes
Average Weight:2.0 Pounds

Power Supply Module

URRHH
DISCONTINUED BY MANUFACTURER
POWER MODULE
HORIZONTAL UNIT
100-240 V AC
125-250 V DC

UR6DH
DISCONTINUED BY MANUFACTURER
DIGITAL I/O MODULE
HORIZONTAL UNIT
16 DIGITAL INPUTS

UR6UH
DISCONTINUED BY MANUFACTURER
DIGITAL I/O MODULE
HORIZONTAL UNIT
6 FORM A OUTPUTS
4 DIGITAL INPUTS

Digital I/O Module

Number of Digital Inputs: 6 discrete digital inputs.
Configurable for 24 VDC, 48 VDC, or 125 VDC
Logic 0 (Low): 0-3 V.
Logic 1 (High): 15-250 V
Continuous Current Rating: 10 A at 250 VAC or 30 VDC
Operating Temperature: -40°C to +70°C.
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing

URSHA
MODULE

DS200GDPAG1AEB
DISCONTINUED BY MANUFACTURER
POWER SUPPLY BOARD
HIGH FREQUNCY
25 KHZ
MARK V

Refurbished The CMU310 is on marketing hold due to component shortage. Please quote IC695CRU320 High Availability and request special pricing to match IC695CRU320 and IC695RMX128. RX3i Redundant High Availability CPU with two built-in serial ports.

IC695CMU310
DISCONTINUED BY MANUFACTURER
SERIAL COMMUNICATIONS MODULE
2 INDEPENDENT ISOLATED SERIAL PORTS
SINGLE SLOT