AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for IC697PWR711
-
Product ModelIC697PWR711
-
Product ParametersPower Supply Module
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size6.5x21.8x29.3cm
-
ManufacturerGeneral Electric
-
Weight1.64 kg
-
Nominal Rated Voltage120 VAC or 240 VAC
-
AC Input90-132 VAC or 180-264 VAC, 50 - 60 Hz
-
Input Power160 watts maximum at full load
-
Input Half Cycle Peak Inrush55 amps (typical), 77 amps (maximum)
-
Output Power100 watts maximum (total for all 3 outputs)
-
+5 VDC4.90 to 5.25 volts (5.07 volts nominal)
-
+12 VDC11.75 to 12.6 volts
-
-12 VDC-12.6 to -11.75 volts
-
Overvoltage Limit+5 VDC Output: 5.7 to 6.7 volts
-
Overcurrent Limit+5 VDC output: 26 amp, maximum
Description
IC697PWR711
POWER SUPPLY MODULE
110/220 VAC OR 115 VDC
50/60 HZ
5 VDC OR +/-12 VDC OUTPUT
1.6/3.5/21 AMP OUTPUT
100 W MAXIMUM
POWER SUPPLY MODULE
110/220 VAC OR 115 VDC
50/60 HZ
5 VDC OR +/-12 VDC OUTPUT
1.6/3.5/21 AMP OUTPUT
100 W MAXIMUM
Revisions
Revision Part #
Also known as
Information
Overview
Manuals
Technical notes
Product Applications
Operation of the Power Supply
Features:
- Operation from 120 VAC, 240 VAC
- Three output voltages, 100 watts tota
- Slide-in rack mount construction
- Electronic short circuit overcurrent protection
- Two rack operation from a single power supply
The 100 Watt Power Supply Module is a rack-mountedunit that plugs directly into a 48-pin backplanemounted connector in the leftmost slot in the rack. Itprovides +5 volt, +12 volt and -12 volt power, and logiclevel sequencing signals to the backplane.This power supply may be used either in a single rackapplication, or may also be used to provide power to asecond rack if the total load is within the supply rating.Interconnection to the second rack is through a prewired cable.
The IC697PWR711 GE Power Supply module may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
GE IC697PWR711 Power Supply module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The power supply includes an electronic overvoltageprotection circuit. This circuit will turn the output offif the 5 volt bus exceeds 6.2 +0.5 V. The power supplymust be turned off to be reset. External overvoltageon the output that triggered the overvoltage protection will not cause the power supply fuse to open.However, if an internal fault in the power supplycaused the overvoltage condition, the fuse may open.Replace this fuse with a 3AG 3 amp, 250 volt fuse.
- Power & Utility Equipment:IEC 61850: turbines, generators & electrical distribution
- Process Manufacturing Equipment:Paper, chemical & pharma: batch processing & fluid control
- Conveyors & Material Handling:Auto assembly & distribution center conveyors
- High-Speed Pumps & Valves:Controls butterfly/solenoid valves in fluid networks
- Metalworking:High-precision drill presses & arc welding machines
- Turbine Control Systems:Backplane for GE Mark I/II turbine control & monitoring
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
This Power Supply module can operate from either120 VAC or 240 VAC nominal inputs. It will also operate from a nominal 125 VDC source. The specifiedrange of operation is from 90 VAC to 264 VAC, andfrom 100 VDC to 150 VDC.For continuous operation (greater than one hour) atlow line voltages and high temperatures, some powerderating must be applied. Refer to the following figure to determine the normal operating range forspecific applications. Normal operating range isshown by the shaded area of the graph for 60C(140F) installations. Operation in the non-shadedregion for specific applications must be limited to <1hour. Reducing the maximum operating temperatureto 55°C (131°F) will increase the normal operatingrange as indicated on the graph.
FAQs
-
What is the IC697PWR711?
+The GE IC697PWR711 is a 100-watt power supply module for the GE Fanuc Series 90-70 PLC system, for rack-mounted applications. -
What is the input voltage range for the IC697PWR711?
+The module supports a nominal 120 VAC or 240 VAC, with an operational range of 90–132 VAC or 180–264 VAC. It also supports 125 VDC, with a range of 100–150 VDC. -
What is the output power of IC697PWR711?
+This power supply provides three outputs with a total power of 100 watts: +5VDC (18 amps max), +12VDC (2 amps), and -12VDC (1 amp). -
Can this power supply work in a two-rack application?
+Yes, it can power two racks, provided the total power demand stays within the 100W supply rating. -
What should I do if my IC697PWR711 is not working?
+The unit may require repair or replacement if it does not show a green LED when powered.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN