PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE Multilin
- MIVII1000E00HI00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
MIVII1000E00HI00 Digital voltage protection relay
GE MIVII1000E00HI00 is an English-language Multilin MIV II voltage protection relay. The 1000 selection provides voltage functions, while the HI supply option accepts high-range AC or DC auxiliary power. Programmable logic, digital I/O and recorded events assist protection and post-fault analysis.
Voltage pickup settings cover 10.0-250.0 V in 0.1 V steps, with configurable protection delays up to 600 seconds. The HI supply is rated 110-250 V DC or 110-230 V AC and consumes no more than 15 W. For the 1000 model, oscillography records twenty-four cycles at eight samples per power-frequency cycle.
Voltage pickup settings cover 10.0-250.0 V in 0.1 V steps, with configurable protection delays up to 600 seconds. The HI supply is rated 110-250 V DC or 110-230 V AC and consumes no more than 15 W. For the 1000 model, oscillography records twenty-four cycles at eight samples per power-frequency cycle.
BEFORE YOU BUY
Confirm the complete MIVII1000E00HI00 identity
ACTUAL APPLICATIONS
Application fields for MIVII1000E00HI00
These broad application fields reflect the documented function and technical characteristics of MIVII1000E00HI00.
-
01 · POWER GENERATION
Thermal Power and Renewable Energy
Conventional electricity and regional energy sectorsHydroelectric power and conventional electricity sectors -
02 · INDUSTRIAL MANUFACTURING
Industrial Engineering and Precision Engineering
Industrial metallurgy and precision metalworking sectorsIndustrial automation and general industrial sectors -
03 · ELECTRIC UTILITIES
Regional Electricity and Renewable Energy
Regional electric utilities and renewable energyElectric power and regional utility sectors
Technical specifications for MIVII1000E00HI00
-
Product ModelMIVII1000E00HI00
-
Product ParametersDigital voltage protection relay
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Protection functionVoltage protection, MIV II 1000
-
Voltage pickup range10.0 to 250.0 V
-
Voltage pickup step0.1 V
-
Voltage-level accuracy±3%
-
Protection delay0 to 600 s
-
Delay setting step0.01 s
-
HI DC supply rating110 to 250 V DC
-
Permissible DC supply88 to 300 V DC
-
HI AC supply rating110 to 230 V AC
-
Permissible AC supply88 to 264 V AC
-
AC supply frequency48 to 62 Hz
-
Maximum power15 W
-
Waveform sampling8 samples per power-frequency cycle
-
Oscillography length1 record of 24 cycles
-
Enclosure protectionIP52
View all additional
Alternative Names
MIVII1000E00HI00
Multilin MIV II
Digital voltage protection relay
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate MIVII1000E00HI00 within Multilin MIV II
Apply MIVII1000E00HI00 as the voltage-function version of the MIV II family. Use the actual voltage-transformer wiring and configured voltage range; the separate 2000 frequency-function and 3000 combined-function models must not be assumed from the common enclosure.
Connect the HI auxiliary supply within 88-300 V DC or 88-264 V AC, with the AC source at 48-62 Hz. Include the 15 W maximum load and coordinate digital input voltage classes and output contact wiring with the installed protection design.
Program pickup levels, delays, input assignments and trip logic using the approved settings file. Prove each enabled voltage element by secondary injection, verify output contacts and indications, and check the event and oscillography records before placing the relay in service.
Features:
- Protection function: Voltage protection, MIV II 1000
- Voltage pickup range: 10.0 to 250.0 V
- Multilin MIV II
Use MIVII1000E00HI00 only within the documented Multilin MIV II arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace MIVII1000E00HI00 within Multilin MIV II
Retain MIVII1000E00HI00 in full to preserve voltage functions, English language and HI auxiliary power. Matching only the MIV II family does not establish the function selection or supply compatibility.
Back up protection settings, communications addresses and logic before removal. Record terminal allocation and the connected voltage and auxiliary circuits; isolate the affected protection scheme under the approved relay replacement procedure.
After installation, restore the approved settings and perform voltage pickup/dropout and timing tests. Check binary I/O, trip contacts, event timestamps and waveform recording before enabling the connected protection outputs.
Features:
- Protection function: Voltage protection, MIV II 1000
- Voltage pickup range: 10.0 to 250.0 V
- Multilin MIV II
Use MIVII1000E00HI00 only within the documented Multilin MIV II arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Exact-model technical data for MIVII1000E00HI00
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for MIVII1000E00HI00 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size15.80 x 26.70 x 18.00 cm
-
Net weight2.76 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8536490090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about MIVII1000E00HI00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does MIVII1000E00HI00 include the MIV II 2000 frequency functions?
The 1000 selection is the voltage-function model; frequency-only and combined versions use different model selections. -
What does the HI supply option accept (MIVII1000E00HI00)?
It is rated 110-250 V DC or 110-230 V AC; permitted ranges are 88-300 V DC and 88-264 V AC. -
Which voltage pickup range applies to range zero (MIVII1000E00HI00)?
Range zero uses 10.0-250.0 V pickup settings in 0.1 V steps. -
How long is the MIV II 1000 oscillography record (MIVII1000E00HI00)?
The 1000 model records one twenty-four-cycle record at eight samples per power-frequency cycle. -
Can a delay be set above one minute (MIVII1000E00HI00)?
The specified protection timer range extends to 600 seconds in 0.01-second steps. -
Which tests should precede restoration of the trip circuit (MIVII1000E00HI00)?
Perform secondary-injection pickup, dropout and timing checks, then verify the configured digital I/O and trip logic. -
What full relay code should appear on the distributor order (MIVII1000E00HI00)?
Keep MIVII1000E00HI00, and include the installed terminal and voltage-transformer configuration with the RFQ. -
What should receiving check on a high-supply MIV II spare (MIVII1000E00HI00)?
Compare the complete code, HI supply label and terminal condition, and confirm that required settings transfer is covered separately.
READY TO VERIFY YOUR PART?
Get a MIVII1000E00HI00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
MIVII1000E00HI00Digital voltage protection relayManufacturer: General ElectricView Details
-
QPI11100S2POperator PanelManufacturer: General ElectricView Details -
ICMFA000000-ABACIndustrial edge data gatewayManufacturer: General ElectricView Details -
IC755CSS10CDA-AA10.4-inch QuickPanel+ operator interfaceManufacturer: General ElectricView Details
-
FGN36AA630NNF FGN306F630NFFGN molded-case circuit breakerManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
