PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE PACSystems RX3i
- IC695ALG704-CB
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695ALG704-CB four-channel analog current/voltage output module
GE IC695ALG704-CB is a four-channel analog current/voltage output module documented for PACSystems RX3i analog I/O. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete four-channel analog current/voltage output module
ACTUAL APPLICATIONS
Application context for IC695ALG704-CB
Official manufacturer documentation supports these system uses when the complete PACSystems RX3i analog I/O configuration is verified.
-
01 · OIL & GAS
Warehouse sorting and conveyor zones
Machine Control SystemsCompressor trains and metering skidsPipeline pumps and storage terminals -
02 · MINING & METALS
Cargo handling and loading berths
Facility Automation SystemsCrushers and grinding millsConveyors and flotation cells -
03 · CEMENT & AGGREGATES
Kiln feed and material processing lines
Remote Station SystemsRotary kilns and clinker coolersRaw-mill conveyors and bagging lines
Technical specifications for IC695ALG704-CB
-
Product ModelIC695ALG704-CB
-
Product Parametersfour-channel analog current/voltage output module
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Output Channels4
-
Current Ranges0–20 mA; 4–20 mA
-
Voltage Ranges0–10 V; ±10 V
-
Resolution14.9 to 15.9 bits
-
External Supply19.2 to 30 V DC
-
External Current150 mA maximum
-
Backplane Current375 mA at 3.3 V DC
-
Update Rate8 ms approximate
-
Accuracy±0.15% at 25 °C
-
Isolation2,550 V DC for 1 second
View all additional
Alternative Names
IC695ALG704 CB
PACSystems RX3i analog I/O four-channel analog current/voltage output module
GE four-channel analog current/voltage output module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match IC695ALG704-CB to the installed PACSystems RX3i analog I/O
GE IC695ALG704-CB is a four-channel analog current/voltage output module for the PACSystems RX3i analog I/O. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare resolution (14.9 to 15.9 bits), external supply (19.2 to 30 V DC) and external current (150 mA maximum) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: IC695ALG704-CB
- Product class: four-channel analog current/voltage output module
- Family: PACSystems RX3i analog I/O
The GE IC695ALG704-CB requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete IC695ALG704-CB identity before exchange
Replace IC695ALG704-CB only after matching the complete article code, four-channel analog current/voltage output module, installed PACSystems RX3i analog I/O role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: IC695ALG704-CB
- Product class: four-channel analog current/voltage output module
- Family check: PACSystems RX3i analog I/O
The GE IC695ALG704-CB requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for IC695ALG704-CB
- GE PACSystems RX3i analog I/O references reviewed
- Exact GE identity required before service
Documentation for GE IC695ALG704-CB must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20 × 15 × 8 cm
-
Shipping weight0.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695ALG704-CB
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is IC695ALG704-CB the right distribution spares spare?
For IC695ALG704-CB during spare-parts review, an industrial distributor should match output channels (4) and current ranges (0–20 mA; 4–20 mA) to the installed PACSystems RX3i analog I/O design. A mismatch can prevent correct integration even when the hardware appears similar. -
Is 0–20 mA; 4–20 mA suitable for IC695ALG704-CB in distribution spares?
For spare-parts review, identify IC695ALG704-CB by the combined specification: current ranges is 0–20 mA; 4–20 mA, while voltage ranges is 0–10 V; ±10 V. An industrial distributor should confirm both values rather than relying on the family name or enclosure. -
Which IC695ALG704-CB voltage ranges matters in distribution spares?
Before wiring or mounting IC695ALG704-CB, an industrial distributor should verify the installation supports voltage ranges of 0–10 V; ±10 V and preserves the documented resolution of 14.9 to 15.9 bits. Record this check in the spare-parts review work pack. -
14.9 to 15.9 bits on IC695ALG704-CB: what should distribution spares confirm?
During spare-parts review, an industrial distributor should commission IC695ALG704-CB under a controlled load or signal and confirm resolution reaches 14.9 to 15.9 bits. Cross-check external supply against 19.2 to 30 V DC, then save the measured result for engineering acceptance. -
Distribution spares troubleshooting for IC695ALG704-CB external supply
During spare-parts review, an industrial distributor should isolate the circuit, compare the actual external supply with the IC695ALG704-CB specification of 19.2 to 30 V DC, and inspect the related external current requirement (150 mA maximum). This separates a module fault from a supply, wiring, or configuration issue. -
What distinguishes IC695ALG704-CB for distribution spares?
For spare-parts review, the IC695ALG704-CB service record should state external current as 150 mA maximum and retain backplane current at 375 mA at 3.3 V DC. These values give an industrial distributor a repeatable baseline for later replacement and fault diagnosis. -
Distribution spares check — IC695ALG704-CB backplane current
For an industrial distributor's spare-parts review request, the quotation should identify the complete IC695ALG704-CB code and confirm backplane current (375 mA at 3.3 V DC) together with update rate (8 ms approximate). The distributor should flag any revision or substitute that changes either requirement. -
MRO distribution spares: verify IC695ALG704-CB against update rate
For an industrial distributor's spare-parts review requirement, check the delivered IC695ALG704-CB label and order code, then verify update rate is 8 ms approximate and output channels is 4. Photograph the label and connectors before acceptance so purchasing and maintenance share the same identity record.
READY TO VERIFY YOUR PART?
Get a IC695ALG704-CB quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC695ALG704-CBfour-channel analog current/voltage output moduleManufacturer: General ElectricView Details
-
-
-
-
IC694ALG442-EDfour-input/two-output analog combination moduleManufacturer: General ElectricView Details
-
-
-
IC694ALG233-ED16-channel current input module with diagnosticsManufacturer: General ElectricView Details
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
