PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE PACSystems RX7i
- IC698CPE020-GM
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC698CPE020-GM 700 MHz PACSystems RX7i CPU with Ethernet, GM revision
GE IC698CPE020-GM is a 700 MHz PACSystems RX7i CPU with Ethernet, GM revision in the GE PACSystems RX7i range. The GE document identifies base catalog IC698CPE020; confirm the IC698CPE020-GM suffix on the installed label and any revision-specific release note. Processor clock: 700 MHz. User RAM: Up to 10 MB, battery backed. User flash memory: 10 MB, non-volatile.
The manufacturer's document records its interface and service limits. Backplane 5 V draw: 4.5 A nominal. Operating temperature: 0–60 °C, fan tray required. Before installation, compare the complete catalog code, installed connections and controller configuration.
The manufacturer's document records its interface and service limits. Backplane 5 V draw: 4.5 A nominal. Operating temperature: 0–60 °C, fan tray required. Before installation, compare the complete catalog code, installed connections and controller configuration.
BEFORE YOU BUY
Confirm the complete 700 mhz pacsystems rx7i cpu with ethernet, gm revision
ACTUAL APPLICATIONS
Application context for IC698CPE020-GM
IC698CPE020-GM supports the documented GE PACSystems RX7i role in the three industry areas below. The complete model suffix and installed configuration determine the applicable engineering setup.
-
01 · POWER GENERATION
Thermal Power and Generation Services
Thermal and Hydroelectric PowerRenewable Electricity Generation -
02 · OIL & GAS
Petroleum Extraction and Pipeline Operations
Oil and Gas ExtractionPipeline and Fuel Distribution -
03 · METALS & MINING
Steelmaking and Rolling Operations
Steel ManufacturingRolling and Metallurgical Industries
Technical specifications for IC698CPE020-GM
-
Product ModelIC698CPE020-GM
-
Product Parameters700 MHz PACSystems RX7i CPU with Ethernet, GM revision
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Processor clock700 MHz
-
User RAMUp to 10 MB, battery backed
-
User flash memory10 MB, non-volatile
-
Backplane 5 V draw4.5 A nominal
-
Operating temperature0–60 °C, fan tray required
-
Boolean execution0.14 ms per 1000 contacts/coils, typical
-
Serial communicationsRS-232 and RS-485
-
Embedded Ethernet portsTwo 10/100 Mbps ports
-
Ethernet duplexHalf or full duplex, auto-sensing
-
Serial protocolsModbus RTU Slave, SNP and Serial I/O
-
Maximum program blocks512
-
Maximum block size128 KB
-
Discrete reference capacity32 Kbits each for %I and %Q
-
Analog reference capacityUp to 32 Kwords each for %AI and %AQ
-
Time-of-day clock drift9 seconds per day maximum
View all additional
Alternative Names
IC698CPE020-GM
GE PACSystems RX7i 700 MHz PACSystems RX7i CPU with Ethernet, GM revision
IC698CPE020 700 MHz PACSystems RX7i CPU with Ethernet, GM revision
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC698CPE020-GM 700 mhz pacsystems rx7i cpu with ethernet, gm revision
The manufacturer source documents IC698CPE020 for GE PACSystems RX7i. The GE document identifies base catalog IC698CPE020; confirm the IC698CPE020-GM suffix on the installed label and any revision-specific release note. It describes processor clock as 700 MHz. Match the controller assembly, slot or network identity and available power before connection.
Use the documented interface and connection arrangement. User RAM is Up to 10 MB, battery backed; user flash memory is 10 MB, non-volatile. Check all field conductors, configuration and external supply against the installed project.
At startup, review power and status indications, test every affected channel, port or function in sequence, then record the verified settings and exact installed revision for future maintenance.
Features:
- 700 MHz RX7i CPU
- Dual embedded Ethernet
- 10 MB user RAM and flash
The IC698CPE020-GM 700 mhz pacsystems rx7i cpu with ethernet, gm revision requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC698CPE020-GM 700 mhz pacsystems rx7i cpu with ethernet, gm revision
Verify the full IC698CPE020-GM marking, including its suffix, before removing the installed unit. A base manual for IC698CPE020 must be read with any applicable revision information and the current hardware configuration.
Preserve the project and photograph wiring, connector assignments, slot position and indicators. Compare the replacement's processor clock (700 MHz) and user ram (Up to 10 MB, battery backed) with the service record.
After the change, restore the approved setup, confirm controller recognition and test affected signals or communications. Record the final nameplate and validation results.
Features:
- 0–60 °C with fan tray
- 700 MHz RX7i CPU
- 10 MB user RAM and flash
The IC698CPE020-GM 700 mhz pacsystems rx7i cpu with ethernet, gm revision requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC698CPE020-GM 700 mhz pacsystems rx7i cpu with ethernet, gm revision must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4 × 18.3 × 29.1 cm
-
Shipping weight0.66 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC698CPE020-GM
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should IC698CPE020-GM be checked before ordering?
Compare the full catalog and suffix with the installed label, GE PACSystems RX7i assembly and manufacturer document. -
Can another revision of IC698CPE020 replace IC698CPE020-GM?
Do not infer interchangeability from the shared base number. Check applicable release notes, firmware and project compatibility. -
What should engineers record before exchanging IC698CPE020-GM?
Save the approved project and record the slot, full nameplate, connector or terminal assignments, supply and current diagnostics. -
How should IC698CPE020-GM be tested after installation?
Confirm controller recognition and status, exercise each affected function with a known condition, and archive the measured outcome. -
Which manual covers IC698CPE020-GM?
The linked manufacturer document covers base article IC698CPE020. Verify the particular IC698CPE020-GM suffix against the delivered module. -
What does a distributor need to quote IC698CPE020-GM?
Send the complete order code, quantity, condition, delivery country and a legible label photo if revision matching is critical. -
How should incoming IC698CPE020-GM be inspected?
Compare the full label and condition against the quotation; inspect contacts, housing and included accessories before installation. -
What should be checked if IC698CPE020-GM is not recognized?
Confirm the correct slot or network position, supply, bus or firmware compatibility and project configuration before replacing other hardware.
READY TO VERIFY YOUR PART?
Get a IC698CPE020-GM quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC698CPE020-GM700 MHz PACSystems RX7i CPU with Ethernet, GM revisionManufacturer: General ElectricView Details
-
IC695CMM002-BFTwo-port isolated serial communications moduleManufacturer: General ElectricView Details
-
-
-
IC695ALG708-ECEight-channel current and voltage analog output moduleManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
