PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- WESDAC D20A SBA0009-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
WESDAC D20A SBA0009-00 D20 analog input module
GE WESDAC D20A SBA0009-00 is a D20 analog input module documented for GE D20 remote I/O modules. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete D20 analog input module
ACTUAL APPLICATIONS
Application context for WESDAC D20A SBA0009-00
Official manufacturer documentation supports these system uses when the complete GE D20 remote I/O modules configuration is verified.
-
01 · POWER GENERATION
Substation analog telemetry panels
SCADA Remote I/O SystemsTransformer signal acquisitionSwitchyard transducer monitoring -
02 · OIL & GAS
Pipeline remote terminal cabinets
RTU Data Acquisition SystemsPressure transmitter scanningFlow signal monitoring -
03 · WATER & WASTEWATER
Remote pumping station telemetry
SCADA Measurement SystemsReservoir level acquisitionPump current monitoring
Technical specifications for WESDAC D20A SBA0009-00
-
Product ModelWESDAC D20A SBA0009-00
-
Product ParametersD20 analog input module
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Analog Inputs32 differential channels
-
Voltage Ranges±1, ±5 and ±10 V
-
Current Ranges±1, ±2.5, ±5, ±10 and ±20 mA
-
A/D Resolution14 bit plus sign
-
Voltage Accuracy±0.05%
-
Current Accuracy±0.1%
-
Input Impedance44 Mohm ±5% for V DC
-
Conversion Time550 ms at 60 Hz
-
ProcessorFreescale 68HC11, 8 bit
-
Processor Clock2 MHz
-
EEPROM512 bytes
-
D.20 Link Ports2
-
Maintenance PortRS-232 at 9600 baud
-
Power Input20 to 60 V DC
-
Typical Power7 W
View all additional
Alternative Names
WESDAC D20A
SBA0009-00
D20ADLUULU8U
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match WESDAC D20A SBA0009-00 to the installed GE D20 remote I/O modules
GE WESDAC D20A SBA0009-00 is a D20 analog input module for the GE D20 remote I/O modules. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare a/d resolution (14 bit plus sign), voltage accuracy (±0.05%) and current accuracy (±0.1%) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: WESDAC D20A SBA0009-00
- Product class: D20 analog input module
- Family: GE D20 remote I/O modules
The GE WESDAC D20A SBA0009-00 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete WESDAC D20A SBA0009-00 identity before exchange
Replace WESDAC D20A SBA0009-00 only after matching the complete article code, D20 analog input module, installed GE D20 remote I/O modules role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: WESDAC D20A SBA0009-00
- Product class: D20 analog input module
- Family check: GE D20 remote I/O modules
The GE WESDAC D20A SBA0009-00 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for WESDAC D20A SBA0009-00
- GE GE D20 remote I/O modules references reviewed
- Exact GE identity required before service
Documentation for GE WESDAC D20A SBA0009-00 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size55 × 22 × 10 cm
-
Shipping weight3.00 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about WESDAC D20A SBA0009-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What should be inspected on arrival?
For WESDAC D20A SBA0009-00, Inspect the housing, connector pins and exact label. Verify analog inputs (32 differential channels) against the manufacturer document before service. -
Which checks follow WESDAC D20A SBA0009-00 installation?
For WESDAC D20A SBA0009-00, Check supply, channel response and diagnostics. Verify voltage ranges (±1, ±5 and ±10 V) against the manufacturer document before service. -
How is the field load verified?
For WESDAC D20A SBA0009-00, Compare load current and external supply limits. Verify current ranges (±1 to ±20 mA with adapters) against the manufacturer document before service. -
What should distributors quote for WESDAC D20A SBA0009-00?
For WESDAC D20A SBA0009-00, Provide quantity, destination and a clear nameplate photo. Verify a/d resolution (14 bit plus sign) against the manufacturer document before service. -
How should an MRO spare be matched?
For WESDAC D20A SBA0009-00, Record the rack, adjacent modules and shutdown window. Verify voltage accuracy (±0.05%) against the manufacturer document before service. -
Will WESDAC D20A SBA0009-00 fit this safety node?
For WESDAC D20A SBA0009-00, Confirm the installed node type, suffix and connector arrangement. Verify current accuracy (±0.1%) against the manufacturer document before service. -
What replaces WESDAC D20A SBA0009-00 correctly?
For WESDAC D20A SBA0009-00, Match the full order code, style and electrical rating. Verify input impedance (44 Mohm ±5% for V DC) against the manufacturer document before service. -
Which label details identify WESDAC D20A SBA0009-00?
For WESDAC D20A SBA0009-00, Use the nameplate, suffix and terminal configuration. Verify conversion time (550 ms at 60 Hz) against the manufacturer document before service.
READY TO VERIFY YOUR PART?
Get a WESDAC D20A SBA0009-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
