Amikon Limited comprehensive Honeywell automation solutions, specializing in the supply of the following core product lines:
Experion PKS ,TDC 3000, TDC 2000, Distributed Control Systems,Experion LS,Safety Manager™ Safety Instrumented Systems,FSC™ (Fail Safe Controller) Safety Systems Additionally,we specialize in providing critical Obsolete Parts for discontinued Honeywell equipment across all legacy systems.
Whether you require components for specific platforms (such as Experion PKS or TDC 3000), or need to source replacement or obsolete parts based on equipment functionality, please Email now: info@amikon.cn+86-18020776786.
We are committed to sourcing the Honeywell process control products you need.
Amikon Limited comprehensive Honeywell automation solutions, specializing in the supply of the following core product lines:
Experion PKS ,TDC 3000, TDC 2000, Distributed Control Systems,Experion LS,Safety Manager™ Safety Instrumented Systems,FSC™ (Fail Safe Controller) Safety Systems Additionally,we specialize in providing critical Obsolete Parts for discontinued Honeywell equipment across all legacy systems.
Whether you require components for specific platforms (such as Experion PKS or TDC 3000), or need to source replacement or obsolete parts based on equipment functionality, please Email now: info@amikon.cn+86-18020776786.
We are committed to sourcing the Honeywell process control products you need.
Rated input voltage:DC 24V
nrush current:80APeak or less
Efficiency:60% or more
Input fuse:Built-in (user no change)
Allowedinstantaneousinterruption:10 ms and shorter
Output voltage:DC 5V (±2%)
Rated input voltage:AC 100V – AC 240V
Input voltage range:AC 85V ~ AC 264V
Input frequency:50 / 60 Hz (47 ~ 63 Hz)
Efficiency:65% or more
Output voltage:DC 5V (±2%)
Output current:6.0A
Over current protect: 6.6A or more
Over voltage protect:5.5V ~ 6.5V
Rated input voltage:AC 100V – AC 240V
Input voltage range:AC 85V ~ AC 264V
Input frequency:50 / 60 Hz (47 ~ 63 Hz)
Efficiency:65% or more
Output voltage:DC 5V (±2%)
Output current:3.0A
Over current protect:3.2A or more
Over voltage protect:5.5V ~ 6.5V
Rated input voltage:AC 100V – AC 240V
Input voltage range:AC 85V ~ AC 264V
Input frequency:50 / 60 Hz (47 ~ 63 Hz)
Efficiency:65% or more
Output voltage:DC 5V (±2%)
Output current:3.0A
Over current protect:3.2A or more
Over voltage protect:5.5V ~ 6.5V
Max. I/O: 3,072Pts
32kstep Programming
non-IEC
Standard
Power Supply:24V DC (±10%)
Power Consumption:15W typical, 25W max
Processor Speed:Dual-core 1.5 GHz
Memory:4GB RAM, 32GB Flash
I/O Capacity:Up to 512 points
Protocol: Profibus-DP
Data Transfer Rate: 9.6 kbps to 12 Mbps
Max. Number of Slaves: Up to 125 devices
Cable Length:Up to 1200 m
Connector Type: 9-pin D-sub
Bus Voltage: 5V logic
16-channel Analog Output Field Termination Assembly
Output Type:4-20 mA
Output Channels:16
Output Readback Accuracy:±4%
Output Current Linearity:± 0.05% nominal
Resolution:± 0.05%
Directly Settable Output Current Range:0 mA, 2.9 mA to 21.1 mA
Output Ripple:100 mV peak-to-peak at power line frequency
Communication Protocol:Modbus RTU over RS‑485
Display:128 × 64 pixel LCD
Keypad:5-button navigation
LED Status Bar:Yes (visual feedback)
Power Supply:24 V DC
Operating Temp:–20 °C to +70 °C
Storage Temp:–40 °C to +85 °C
Humidity:0–95 % RH, non-condensing
Galvanic isolation
Open wire detectio
Optional redundancy
Direct / Reverse Input Indication
Supplies Non-incendive field power
Internal or external field power selection
Extensive internal diagnostics for data integrity
Input Voltage:100–240 VAC (universal)
Output Voltage:24 VDC (adjustable up to ~27 V)
Output Current:20 A continuous
Protections:Overcurrent, overvoltage, short-circuit
Operating Temperature Range:–25 °C to +70 °C
Supply voltage: 24 V DC
Reset input voltage: 18 - 70 V DC
Reset input current: 1.1 mA at 24 V DC
Earth fault threshold: 5.5 mA (± 1 mA)
Max. earth current: 25 - 32 mA
Supply voltage: 24 V DC
Reset input voltage: 18 - 70 V DC
Reset input current: 1.1 mA at 24 V DC
Earth fault threshold: 5.5 mA (± 1 mA)
Max. earth current: 25 - 32 mA
Max. output current: 2 A
Isolation 1500 V DC / 1000 V AC
Initial contact resistance: 30 mW
Operating temperature: -5°C-+50°C (23°F-+122°F)
Max. output voltage: 36 V DC / 30 V AC
Power Supply:12–24 V DC
Current Consumption:250 mA @ 24 V DC
Connectivity:Serial (RS‑232);
Mounting:Desk or panel mount with screw terminals
Enclosure Type:Indoor use; IP20 equivalent
Operating Temp:0 °C to +50 °C
Storage Temp:–40 °C to +85 °C
Humidity Limits:Up to 90–95% RH, non-condensing
DIGITAL INPUT MODULE
LINE MONITORED W/ FAULT MONITOR
16 CHANNELS
Functional tests of the various trip levels applied
Channel independence
Monitoring of supply voltage to input devices
Earth connection
Used supply voltages
