
























100-BASE-T CABLE (20M)
Cable Type:Industrial Ethernet (CAT5e)
Length:20 meters (±1%)
Bandwidth:100 MHz
Data Rate:100 Mbps
Impedance:100Ω ±15%
DC Resistance:≤9.38Ω/100m
Capacitance:≤5.6nF/100m
Max Voltage:30V AC
100-BASE-T CABLE (10M)
Category:CAT5e
Length:10.0 meters (±1%)
Bandwidth:100MHz
Data Rate:100Mbps
Characteristic Impedance:100Ω ±15%
Conductor Gauge:24 AWG stranded copper
DC Loop Resistance:≤9.38Ω/100m
Capacitance:≤5.6nF/100m
Max Operating Voltage:30V rms
100-BASE-T CABLE (5M)
100-BASE-T CABLE (5M)
Category:CAT5e
Length:5.0 meters (±0.5%)
Data Rate:100Mbps
Impedance:100Ω ±15%
Conductor Gauge:24 AWG stranded
DC Resistance:≤9.38Ω/100m
Capacitance: ≤5.6nF/100m
Max Voltage:30V AC
EUCN Cable 20 m
EUCN Cable 20 m
(Tree B-Green Boots)
Length:20 meters (±1%)
Data Rate:1Gbps
Impedance:100Ω ±10%
DC Resistance:≤7.5Ω/100m
Capacitance:≤4.5nF/100m
Conductors:4 twisted pairs (23 AWG)
100-BASE-T CABLE (10M)
10 m (33 ft)
Data Rate:100Mbps
Characteristic Impedance:100Ω ±15%
Max DC Resistance:9.38Ω/100m
Capacitance:≤5.6nF/100m
Insertion Force:≤20N
Durability:≥750 mating cycles
100-BASE-T CABLE (5M)
5 m (16 ft)
Cable Type:Ethernet Patch Cable
Category:CAT5e
Length:5 meters (±0.5%)
Data Rate:100Mbps
Impedance:100Ω ±15%
Conductor Gauge:24 AWG stranded copper
DC Resistance:≤9.38Ω/100m
100-BASE-T CABLE
100-BASE-T CABLE (2M)
2 m (6.5 ft)
(Y) = Yellow codedboots
(G) = Green codedboots
I/O Link Cable
Tap Expander
1:2 Expands Drop Connection
Gray
CABLE SET PM POWER
W/LINK PROTECT REV C
Series 8 FIM8 Kit, Redundant
Series 8 FIM8 Kit, Redundant
Redundant
H1 Foundation fieldbus
24V Power, Module & FTE Status LEDs
Number of Inputs 2
Input Voltage Range 16~32 VDC
Series 8 FIM4 Kit, Redundant
Series 8 FIM4 Kit
Redundant
H1 Foundation fieldbus
24V Power, Module & FTE Status LEDs
Number of Inputs 2
Input Voltage Range 16~32 VDC
Digital Input Pulse Module
Digital Input 24V Pulse Accumulation
Extensive internal diagnostics for data integrity
Optional redundancy
Internal / External field power selection
Galvanic isolation
Support Pulse Accumulation & frequencymeasurement
Support mix of per channel Pulse accumulationand DI
DO Relay Extension Board
DO Relay Extension
Galvanic isolation
Isolated Dry Contact
Counter EMF Snubbing Circuit
LED indication for each channel ON condition
I/O module
High-level AI HART
Extensive self-diagnostics
Optional redundancy
Supports either Single Ended / DifferentialInputs
HART-capable, multivariable instruments
and multiplemodems for fast collection of control variables
Fast loop scan

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.