PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
10002/1/2 central processor unit
Honeywell FSC central processor unit that controls system operations and provides RAM, application-memory and hardware memory-compare functions. Confirm the complete article identity, ratings, interfaces and companion hardware before ordering.
BEFORE YOU BUY
Confirm the complete central processor unit
ACTUAL APPLICATIONS
Application context for 10002/1/2
Manufacturer documentation places the run/stop keyed switch module in practical network applications. The three cases below describe different operating tasks in which 10002/1/2 performs its documented product-family role with the configured companion equipment.
-
01 · AUTOMOTIVE
Coordinate robot-cell networking with Run Stop
Inside the robot controllers, safety devices and PLCs, 10002/1/2 operates in its approved product-family role as a run/stop keyed switch module. During model change, the system uses this function to exchange interlocks and production status across the cell, helping it start the correct joining sequence. -
02 · INFORMATION TECHNOLOGY
Stabilize remote-station communication during station reconnection
Across the distributed I/O and supervisory servers, 10002/1/2 supports the configured automation role as a run/stop keyed switch module. During station reconnection, the system uses this function to restore cyclic data exchange with the remote station, helping it return the station to the controller scan. -
03 · WATER & WASTEWATER
Stabilize remote pump-station communication with Run Stop
Inside the pump PLCs, radios and supervisory servers, 10002/1/2 handles its designated signal or control duty as a run/stop keyed switch module. During station duty change, the system uses this function to exchange commands, status and alarm data with the remote station, helping it retain coordinated pump operation.
Technical specifications for 10002/1/2
-
Product Model10002/1/2
-
Product Parameterscentral processor unit
-
In stock1 unit
-
ManufacturerHoneywell
-
Module FunctionCentral processor unit
-
SystemHoneywell FSC
-
Type Number10002/1/2 06001
-
System RAM128 Kbytes
-
Application RAM128 Kbytes
-
Program Memory10002/A/1 memory print
-
Application EPROMUp to 1 Mbyte
-
Supply5 V DC, 1 A
-
Module Space4 TE, 3 HE
-
SoftwareVersion 2.80b or later
View all additional
Alternative Names
10002/1/2
Honeywell run/stop keyed switch module
Honeywell FSC safety controller operator modules run/stop keyed switch module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 10002/1/2 to the installed Honeywell FSC safety controller operator modules
Honeywell 10002/1/2 is a run/stop keyed switch module for the Honeywell FSC safety controller operator modules. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare operator function (Run / stop keyed selection), contact type (Safety-controller keyed contact) and control voltage (24 V DC class) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 10002/1/2
- Product class: run/stop keyed switch module
- Family: Honeywell FSC safety controller operator modules
The Honeywell 10002/1/2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 10002/1/2 identity before exchange
Replace 10002/1/2 only after matching the complete article code, run/stop keyed switch module, installed Honeywell FSC safety controller operator modules role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 10002/1/2
- Product class: run/stop keyed switch module
- Family check: Honeywell FSC safety controller operator modules
The Honeywell 10002/1/2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for 10002/1/2
- Product family: Honeywell FSC safety controller operator modules
- Exact Honeywell identity required before service
Documentation for Honeywell 10002/1/2 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size16 × 12 × 3 cm
-
Shipping weight0.30 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 10002/1/2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which nameplate details identify the correct 10002/1/2 for a distributor quotation?
Quote 10002/1/2 with the complete suffix, run/stop keyed switch module, Honeywell FSC safety controller operator modules, quantity and clear nameplate photographs. -
What should engineering compare before integrating 10002/1/2 into the installed system?
Compare the documented Honeywell FSC safety controller operator modules role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to 10002/1/2?
Inspect the 10002/1/2 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same Honeywell FSC safety controller operator modules family directly replace 10002/1/2?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 10002/1/2?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 10002/1/2. -
Which configuration data should be backed up before exchanging 10002/1/2?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 10002/1/2 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected run/stop keyed switch module function at a safe operating point. -
What service evidence should be retained after work on 10002/1/2?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 10002/1/2.
READY TO VERIFY YOUR PART?
Get a 10002/1/2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
