PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Invensys
- Triconex
- 4000103-520
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
4000103-520 Ethernet interface cable assembly for the Tricon safety instrumented system
Triconex 4000103-520 is a Ethernet interface cable assembly used with the Tricon safety instrumented system. The complete order reference identifies the required hardware and must be matched to the installed chassis, baseplate, cable or field termination.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 4000103-520
Manufacturer documentation places the Ethernet Interface Cable in practical safety applications. The three cases below describe different operating tasks in which 4000103-520 performs its documented product-family role with the configured companion equipment.
- 01 · CHEMICAL & PETROCHEMICAL
Control reactor protection during demand initiation
Within the trip transmitters and final elements, 4000103-520 supports the configured automation role as a Ethernet Interface Cable. During demand initiation, the system uses this function to evaluate the configured safety inputs against the approved logic, helping it move the protected process toward its safe state. - 02 · POWER GENERATION
Support turbine trip logic during abnormal speed
For the coordinated operation of the speed and process trip inputs, 4000103-520 performs its assigned control role as a Ethernet Interface Cable. During abnormal speed, the system uses this function to vote the configured trip channels and issue the shutdown command, helping it bring the turbine toward a controlled safe state. - 03 · OIL & GAS
Verify pipeline isolation with Ethernet Interface
In the automation chain for the line-pressure inputs and sectionalizing valves, 4000103-520 supports the configured automation role as a Ethernet Interface Cable. During confirmed line event, the system uses this function to isolate the affected transfer section, helping it contain the event within the intended section.
Technical specifications for 4000103-520
-
Product Model4000103-520
-
Product ParametersEthernet interface cable
-
In stock1 unit
-
ManufacturerInvensys
-
Product ClassEthernet interface cable assembly
-
System PlatformTricon safety instrumented system
-
Order Reference4000103-520
-
Interface Arrangement10/100 Mbit/s Tricon data link
-
Nominal Cable Length20 ft / 6.1 m
-
Conductor Configuration4 × 24 AWG
-
Voltage Rating300 V
-
Current RatingLow-level data service
-
Characteristic Impedance100 Ω ±15%
-
Electrical Isolation1,500 V DC conductor-to-shield
-
Operating Temperature−40–85 °C
-
Storage Temperature−40–85 °C extended storage
-
Relative Humidity5–95% noncondensing
-
Shielding ConstructionOverall shielded data cable
-
Flame PerformanceIndustrial flame-retardant jacket
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match 4000103-520 to the installed Triconex configuration
Triconex 4000103-520 is a Ethernet interface cable assembly for the Tricon safety instrumented system. Verify the complete product identity and controller generation before integration.
Match all mating modules, baseplates, termination panels, cables, field power and signal assignments. Preserve approved project records.
Complete the manufacturer-recommended diagnostics and site functional test after installation.
Features:
- Exact product identity: 4000103-520
- Product class: Ethernet interface cable assembly
- Model-specific values listed in the specifications
The Triconex 4000103-520 requires its ratings, wiring and installed configuration to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the full replacement identity before commissioning
Replace Triconex 4000103-520 only after matching the complete order reference, hardware revision, connector or terminal arrangement and installed function.
Record the existing slot, cable and field-terminal labels before removal. Transfer only configuration data approved for the exact hardware and project.
After installation, verify power, communications, every connected point, alarm response and the complete safety function.
Features:
- Match the complete 4000103-520 identifier
- Compare revision, connectors and mating hardware
- Test diagnostics and field operation before service
The Triconex 4000103-520 requires replacement verification against the installed hardware and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Available documents must be matched to the complete 4000103-520 identity, installed system and applicable revision.
Features:
- Model-specific data sheet prepared for 4000103-520
- Manufacturer guide reference identified before order
- Installation steps follow Triconex maintenance controls
Documentation for Triconex 4000103-520 must match the installed system and revision; confirm manual availability in the written quotation.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
- 01
Shipping & delivery
- DispatchEligible stock: same / next day
- CarriersDHL, FedEx or UPS
- Ship fromXiamen, China
- Packed size39 × 33 × 5 cm
- Shipping weight1.94 kg
- 02
Payment & customs
- PaymentBank transfer (T/T)
- CurrenciesUSD · EUR · GBP · RMB
- Credit cardsNot accepted
- HS reference8544422900
- OriginUnited States
- 03
Warranty & returns
- Warranty12 months from AMIKON
- InspectionLabel, condition and packing checks
- ReturnsPrior RMA authorisation required
- CompatibilityConfirm before order
- OEM warrantyDoes not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
Part checked
Full suffix recordedCondition checked
Label and appearancePacking checked
Antistatic protectionTracking supplied
Established couriersSandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 4000103-520
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should Electrical Isolation be interpreted when selecting 4000103-520?
For 4000103-520, the manufacturer reference states Electrical Isolation as 1,500 V DC conductor-to-shield; use that value with the complete nameplate and installed system. -
What installation decision is controlled by Storage Temperature on 4000103-520?
Plan the 4000103-520 connection around −40–85 °C extended storage for Storage Temperature, then verify its mating hardware and terminal assignment before installation. -
Which commissioning check confirms the stated Shielding Construction for 4000103-520?
On 4000103-520, measure or diagnose the applicable channel and confirm it agrees with Overall shielded data cable, the documented Shielding Construction for this hardware. -
Why must maintenance staff verify Product Class before replacing 4000103-520?
A mismatch in Product Class can change 4000103-520 compatibility or field behavior; the required reference for this product is Ethernet interface cable assembly. -
What field condition must remain within the Order Reference specification for 4000103-520?
Keep the circuit connected to 4000103-520 within 4000103-520 for Order Reference and investigate any reading outside the manufacturer specification. -
How does the published Nominal Cable Length affect wiring or system compatibility for 4000103-520?
The 4000103-520 Nominal Cable Length entry is 20 ft / 6.1 m; apply it when checking cables, baseplates, field power and the approved project configuration. -
What record should be compared with the Voltage Rating value before 4000103-520 is energised?
Before powering 4000103-520, compare the site drawing, nameplate and maintenance record against 300 V for Voltage Rating. -
Which post-installation test relates directly to Characteristic Impedance on 4000103-520?
After installing 4000103-520, test the related point, port or circuit against 100 Ω ±15%, then record the Characteristic Impedance result.
READY TO VERIFY YOUR PART?
Get a 4000103-520 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
