PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
8110 Main controller chassis for the Tricon safety instrumented system
Triconex 8110 is a Main controller chassis used with the Tricon safety instrumented system. The complete order reference identifies the required hardware and must be matched to the installed chassis, baseplate, cable or field termination.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
8110 supports Triconex safety-system lifecycle work
Use this Main controller chassis only after matching its documented hardware, field circuits and installed controller configuration.
-
01 · SAFETY CONTROL
Maintain configured shutdown functions
Preserve the approved logic path, point assignment and voting architecture during scheduled maintenance. -
02 · FIELD INTEGRATION
Connect the documented signals
Confirm voltage, current, channel, termination and protective-earth requirements before wiring the 8110. -
03 · LIFECYCLE SERVICE
Verify replacement operation
Run diagnostics and a site functional test before returning the affected safety function to service.
Technical specifications for 8110
-
Product Model8110
-
Product ParametersMain controller chassis
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerInvensys
-
Product ClassMain controller chassis
-
System PlatformTricon fault-tolerant controller
-
Mechanical Format19-inch industrial rack assembly
-
Chassis FabricationBlack zinc-plated welded steel
-
Overall Width48.3 cm cabinet span
-
Overall Height57.8 cm installed frame
-
Overall Depth45.1 cm enclosure clearance
-
I/O Bus ArchitectureThree isolated RS-485 channels
-
I/O Bus Rate375 kbit/s triplicated transfer
-
Communication Bus Rate2 Mbit/s module link
-
Expansion PortsSix backplane bus connectors
-
Controller KeyswitchRUN-PROGRAM-STOP-REMOTE selection
-
Module RetentionMechanically keyed slot guides
-
Engineering SoftwareTriStation 1131 configuration
-
Safety ArchitectureTriple modular redundant operation
View all additional
Alternative Names
8110
Triconex 8110
Invensys 8110
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match 8110 to the installed Triconex configuration
Triconex 8110 is a Main controller chassis for the Tricon safety instrumented system. Verify the complete product identity and controller generation before integration.
Match all mating modules, baseplates, termination panels, cables, field power and signal assignments. Preserve approved project records.
Complete the manufacturer-recommended diagnostics and site functional test after installation.
Features:
- Exact product identity: 8110
- Product class: Main controller chassis
- Model-specific values listed in the specifications
The Triconex 8110 requires its ratings, wiring and installed configuration to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the full replacement identity before commissioning
Replace Triconex 8110 only after matching the complete order reference, hardware revision, connector or terminal arrangement and installed function.
Record the existing slot, cable and field-terminal labels before removal. Transfer only configuration data approved for the exact hardware and project.
After installation, verify power, communications, every connected point, alarm response and the complete safety function.
Features:
- Match the complete 8110 identifier
- Compare revision, connectors and mating hardware
- Test diagnostics and field operation before service
The Triconex 8110 requires replacement verification against the installed hardware and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Available documents must be matched to the complete 8110 identity, installed system and applicable revision.Features:
- Model-specific data sheet prepared for 8110
- Manufacturer guide reference identified before order
- Installation steps follow Triconex maintenance controls
Documentation for Triconex 8110 must match the installed system and revision; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size58 × 48 × 44.5 cm
-
Shipping weight24.7 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 8110
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Why must the first chassis in a Tricon system be model 8110?
For the Main controller chassis, product class is Main controller chassis. Confirm this identity against the installed nameplate and cabinet records. -
Where are the main processors installed within the 8110 backplane?
For the Main controller chassis, mechanical format is 19-inch industrial rack assembly. Use the manufacturer value when checking the existing hardware and field circuit. -
How do the six expansion ports provide two triplicated bus paths?
For the Main controller chassis, overall width is 48.3 cm cabinet span. Record the actual installation before any connector, module or terminal is moved. -
What enclosure dimensions and support capacity are required?
For the Main controller chassis, i/o bus architecture is Three isolated RS-485 channels. Keep the documented arrangement intact and correct any discrepancy before energising. -
Which keyswitch position permits TriStation program changes?
For the Main controller chassis, expansion ports is Six backplane bus connectors. Review the indicated condition together with active controller diagnostics. -
How are communication modules linked to the main processors?
For the Main controller chassis, module retention is Mechanically keyed slot guides. Do not assume interchangeability from appearance; the complete configuration must agree. -
What module keying and slot records should be checked during a chassis swap?
For the Main controller chassis, engineering software is TriStation 1131 configuration. Retain the result in the maintenance record for the affected safety function. -
Which controller-wide tests are required before the 8110 returns to RUN?
For the Main controller chassis, safety architecture is Triple modular redundant operation. Complete the stated commissioning check before returning the equipment to service.
READY TO VERIFY YOUR PART?
Get a 8110 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
