PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- KEYENCE
- CV-X422F
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
CV-X422F controls 2M-pixel camera inspection systems
KEYENCE CV-X422F is a CV-X series 2M-pixel camera vision controller identified in the official manufacturer model directory. It forms the controller layer of a configured vision system using a supported camera, optics, illumination, triggers and result interfaces.
Before purchase, confirm the exact camera class, cable, lens, working distance, lighting, I/O, network, software environment and saved inspection project. The official controller envelope is 12.2 x 16.8 x 14.16 cm; additional wiring, airflow and service clearance remains necessary.
Before purchase, confirm the exact camera class, cable, lens, working distance, lighting, I/O, network, software environment and saved inspection project. The official controller envelope is 12.2 x 16.8 x 14.16 cm; additional wiring, airflow and service clearance remains necessary.
BEFORE YOU BUY
Confirm the complete vision system before ordering
ACTUAL APPLICATIONS
Where CV-X422F supports configured machine-vision tasks
KEYENCE documents CV-X series inspection workflows across presence, position, appearance, dimension and code-reading tasks. Validate the complete optical and control configuration for each line.
-
01 · PRESENCE CHECK
Verify assembly completeness
Detect missing clips, fasteners or fitted components using a compatible 2M-pixel camera and controlled lighting. -
02 · POSITIONING
Locate parts for guided motion
Output position and orientation results for alignment or robot-handling tasks after the camera field and coordinate system are calibrated. -
03 · CODE INSPECTION
Check printed identification
Inspect text, labels and 1D or 2D codes with optics, illumination and acceptance settings validated for the actual line.
Technical specifications for CV-X422F
-
Product ModelCV-X422F
-
Product ParametersMachine vision controller
-
In stock1 unit
-
ManufacturerKEYENCE
-
Controller SeriesCV-X400
-
Controller Type2M-pixel camera controller
-
Supported Camera Resolution2 megapixels
-
Maximum Camera Connections4 cameras
-
Configuration SoftwareCV-H1XA
-
Storage MediumSD card
-
Serial InterfaceRS-232C
-
Industrial EthernetEtherNet/IP and PROFINET
-
File Transfer ProtocolFTP
-
Mounting MethodDIN rail
-
ComplianceCE
-
Built-in BatteryLithium metal
View all additional
Alternative Names
CV-X422F
CV-X420F
KEYENCE CV-X 2M-pixel camera Controller
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match CV-X422F to the installed CV-X vision controller systems
KEYENCE CV-X422F is a 2M-pixel camera controller for the CV-X vision controller systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare judgement output (Overall judgement and strobe output guidance), camera operation (Multiple-camera and random-trigger guidance) and measurement setup (Scaling and calibration functions documented) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: CV-X422F
- Product class: 2M-pixel camera controller
- Family: CV-X vision controller systems
The KEYENCE CV-X422F requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete CV-X422F identity before exchange
Replace CV-X422F only after matching the complete article code, 2M-pixel camera controller, installed CV-X vision controller systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: CV-X422F
- Product class: 2M-pixel camera controller
- Family check: CV-X vision controller systems
The KEYENCE CV-X422F requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for CV-X422F
- KEYENCE CV-X vision controller systems references reviewed
- Exact KEYENCE identity required before service
Documentation for KEYENCE CV-X422F must match the installed equipment; confirm document applicability before service.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size5.6 x 8.8 x 17.2 cm
-
Shipping weight1.00 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537109090
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about CV-X422F
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which camera class is documented for CV-X422F?
KEYENCE identifies CV-X422F as a controller that supports the 2M-pixel camera class. Confirm the exact camera, cable, lens and lighting separately. -
Is CV-X420F a separate item on this page?
No. CV-X420F is retained only as an alternate search reference requested by the customer; the official KEYENCE directory identifies the published controller as CV-X422F. -
What cabinet space should be reserved for CV-X422F?
The official dimensional drawing shows a 122 mm by 168 mm by 141.6 mm controller envelope. Allow additional clearance for connectors, wiring, airflow and DIN-rail service. -
Can an existing inspection program be moved without validation?
No. Back up the project, confirm camera and option compatibility, then validate tools, calibration, timing, I/O and pass/fail criteria on the actual line. -
Does the controller listing include a camera and lighting?
Not automatically. KEYENCE notes that depicted accessories may not be included. The quotation must identify every supplied camera, lens, cable, light and option. -
What should maintenance record before exchanging CV-X422F?
Record the complete controller label, camera models, cable routes, I/O wiring, network settings, software version, calibration data and current inspection project. -
How should a 2M-pixel setup be commissioned?
Confirm focus and field of view, lock lighting and exposure, verify calibration, exercise all triggers and outputs, and challenge the inspection with known good and reject samples. -
Where are the controlled operating procedures obtained?
Use the current KEYENCE CV-X series setup and user documentation available from the official model download area; this product record is a procurement reference.
READY TO VERIFY YOUR PART?
Get a CV-X422F quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
