PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- SICK
- ATM90-PTG13X13
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
ATM90-PTG13X13 absolute multiturn encoder
SICK ATM90-PTG13X13 is a absolute multiturn encoder in the SICK ATM90 PROFIBUS encoders. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete absolute multiturn encoder
ACTUAL APPLICATIONS
Application context for ATM90-PTG13X13
Manufacturer documentation places the absolute multiturn encoder in practical network applications. The three cases below describe different operating tasks in which ATM90-PTG13X13 performs its documented product-family role with the configured companion equipment.
-
01 · INFORMATION TECHNOLOGY
Observe remote-station communication during station reconnection
Inside the distributed I/O and supervisory servers, ATM90-PTG13X13 serves its documented function as a absolute multiturn encoder. During station reconnection, the system uses this function to restore cyclic data exchange with the remote station, helping it return the station to the controller scan. -
02 · WATER & WASTEWATER
Align treatment-area fiber ring during single-link interruption
In the automation chain for the managed switches and process-area controllers, ATM90-PTG13X13 supports the configured automation role as a absolute multiturn encoder. During single-link interruption, the system uses this function to move process traffic over the remaining network path, helping it keep the treatment process visible during the link event. -
03 · FOOD & BEVERAGE
Observe filling-line communication during line-speed change
At the control layer of the fillers, checkweighers and line controllers, ATM90-PTG13X13 performs its assigned control role as a absolute multiturn encoder. During line-speed change, the system uses this function to carry cyclic control and diagnostic traffic between line devices, helping it keep filling and inspection events synchronized.
Technical specifications for ATM90-PTG13X13
-
Product ModelATM90-PTG13X13
-
Product Parametersabsolute multiturn encoder
-
In stock1 unit
-
ManufacturerSICK
-
Exact Article CodeATM90-PTG13X13
-
Product ClassAbsolute Multiturn Encoder
-
Product FamilySICK ATM90 PROFIBUS encoders
-
Singleturn Resolution13 bit / 8,192 steps
-
Multiturn Range13 bit / 8,192 revolutions
-
Angular Step0.043°
-
System Accuracy±0.25°
-
Repeatability0.1°
-
CommunicationPROFIBUS DP / DPV0
-
Station Address0 to 127
-
Bus Rate9.6 kbit/s to 12 Mbit/s
-
Initialization Time1,250 ms
-
Position Cycle0.25 ms
-
Cable EntryM16 × 1.5
View all additional
Alternative Names
ATM90 PTG13X13
SICK absolute multiturn encoder
SICK ATM90 PROFIBUS encoders absolute multiturn encoder
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match ATM90-PTG13X13 to the installed SICK ATM90 PROFIBUS encoders
SICK ATM90-PTG13X13 is a absolute multiturn encoder for the SICK ATM90 PROFIBUS encoders. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare singleturn resolution (13 bit / 8,192 steps), multiturn range (13 bit / 8,192 revolutions) and angular step (0.043°) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: ATM90-PTG13X13
- Product class: absolute multiturn encoder
- Family: SICK ATM90 PROFIBUS encoders
The SICK ATM90-PTG13X13 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete ATM90-PTG13X13 identity before exchange
Replace ATM90-PTG13X13 only after matching the complete article code, absolute multiturn encoder, installed SICK ATM90 PROFIBUS encoders role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: ATM90-PTG13X13
- Product class: absolute multiturn encoder
- Family check: SICK ATM90 PROFIBUS encoders
The SICK ATM90-PTG13X13 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for ATM90-PTG13X13
- Product family: SICK ATM90 PROFIBUS encoders
- Exact SICK identity required before service
Documentation for SICK ATM90-PTG13X13 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size9 × 9 × 15 cm
-
Shipping weight0.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginJapan
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about ATM90-PTG13X13
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can another article in the same SICK ATM90 PROFIBUS encoders family directly replace ATM90-PTG13X13?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing ATM90-PTG13X13?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting ATM90-PTG13X13. -
Which configuration data should be backed up before exchanging ATM90-PTG13X13?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission ATM90-PTG13X13 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected absolute multiturn encoder function at a safe operating point. -
What service evidence should be retained after work on ATM90-PTG13X13?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for ATM90-PTG13X13. -
Which nameplate details identify the correct ATM90-PTG13X13 for a distributor quotation?
Quote ATM90-PTG13X13 with the complete suffix, absolute multiturn encoder, SICK ATM90 PROFIBUS encoders, quantity and clear nameplate photographs. -
What should engineering compare before integrating ATM90-PTG13X13 into the installed system?
Compare the documented SICK ATM90 PROFIBUS encoders role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to ATM90-PTG13X13?
Inspect the ATM90-PTG13X13 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage.
READY TO VERIFY YOUR PART?
Get a ATM90-PTG13X13 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
