Output Range: 4–20 mA
Current Regulation Accuracy: ±0.1% of full scale @ 20°C
Maximum Loop Resistance: ≤500 Ω
Minimum Load: Device must sustain ≥3.5 mA
Power Supply:24 VDC ±10%
Isolation: 500 VAC galvanic isolation
Operating Temperature: –20°C to +60°C
Relative Humidity: 5–95% (non-condensing)
Robicon Power Cell
Input Voltage:750–900 VDC
Rated Power: Up to 250 kVA
Continuous RMS: 260–300 A
AC Line-to-Line: 460 V ±10%
Switching Frequency: Up to 500 Hz
Operating: 0°C–55°C
Storage/Derating: Up to 70°C
ASI Robicon
Harmony NXG DCR Box Drive Control
DC-Link Voltage Range: 510–930 VDC
Current Capacity: Up to 1,000 A
Protection Features:±2% tolerances
Operating Temperature: –10°C to +50°C
Voltage: 3-Phase, 400–690 VAC
Frequency : 50/60 Hz (±5%)
Main Output: 24 VDC
Current Range: 10–20 A
Ripple Noise: <1%
Auxiliary Outputs: Possible ±15 VDC or 5 VDC
Input-to-Output Isolation: ≥2.5 kVAC
Efficiency: Typically ≥85% at full load
Component Type: Modular Power Cell
Nominal DC Voltage: 1,000–1,700 VDC
Input Current:50–200 A
AC Output Per Cell:690–1140V AC
Switching Frequency: 0–60 Hz
Insulation Testing: Rated for 5–15 kV
Legacy Status: Sinamics SL150
Input Supply: 120V AC (±10%)
Frequency: 50/60 Hz (±5%)
Analog Inputs: Typically 0–10 V or 4–20 mA
Galvanic Isolation: ≥1500 V AC
Power Consumption:≤5 W (typical)
PC BOARD
PLC MODULE
RS-232 X 1
RS-485 X 2Input Voltage:+5V, ±15V
Current Consumption: 0.5A to 2A
Isolation Voltage: 1500V AC min
Analog Inputs:±10V or 4-20mA
Logic Side: 24 V DC (±10%)
High-Side Gate Drive: 15 V
Negative Turn-Off Voltage: -8 V
Isolation Voltage: 2500 V AC
Output Current (Gate Drive): 2-5 A
Rise/Fall Time: <100 ns
Operating Temperature: -20°C to +70°C
Power Supply Input:24 VDC ±10%
Logic Voltage Levels:5 VDC (TTL)
Communication Interface:Fiber-optic, RS-485
Input Voltage (Power Cell):230–690 VAC
Max Cells per Drive:10–28 cells
Operating Temperature:–20°C to +55°C (0–45°C ideal)
Relative Humidity:≤95% (non-condensing)
Altitude:Up to 1000 m (no derating)
Robicon NXG Power Supply
High Voltage Inverter DCR Power Supply
AC Input: 480V–600V AC
Input Current: Typ. 10–20 A
DC Output Voltage: 24V–48V DC (±1%)
Efficiency: >90%
Power Factor: ≥0.95
Isolation Voltage: ≥2500 VAC
Standard: –20°C to +55°C
Low-voltage control signals:5V, 24V DC
Medium-voltage isolation:up to 4160V
Control signals: ≤ 5A
Gate driver power: ≤ 10A
PWM signals to IGBT gate drivers
DC bus voltage sensing