


























Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
ELECTRONICS MODULE
ELECTRONICS MODULE
SIMATIC DP
FOR ET 200S
2 ANALOG OUTPUT
15 MM WIDTH
+/-20 MA
4-20 MA
13 BIT CYCLE TIME LESS THAN 1 MS
WITH SF LED (GROUP FAULT)
Interface IM151-1 HF
SIMATIC DP
Interface module
IM151-1 High Feature f. ET200S
Transmission rate to 12 Mbit/s
data volume 244 bytes each for I/O max. 63
modules can be connected
isochronous mode
Bus connection via 9-pin D-sub incl
termination module
I/O MODULE
I/O MODULE
24 VDC
192 KB WORK MEMORY
PROFINET INTERFACE AS I/O CONTROLLER
THREE RJ45 PORTS
WITHOUT BATTERY
MMC REQUIRED
ET200S
IM151-8 PN/DP CPU
SIMATIC DP
DIN RAIL MOUNT
ANALOG INPUT MODULE
ANALOG INPUT MODULE
SIMATIC S7-400
24 VDC
200-600 MA
8 ISOLATED INPUT
14 BIT RESOLUTION
Analog Input Module
SIMATIC DP
ELECTRONIC MODULE FOR ET 200S
2 AI STAND.I-4DMU 15 MM WIDE
+/-20MA; 13 BIT + SIGN,4 .. 20MA
12 BITFOR 4-WIRE TRANSDUCER CYCLE
TIME 65 MS/CHANNEL
WITHLED SF (GROUP FAULT)
SM 421 Digital Input Module
DIGITAL INPUT MODULE
SIMATIC S7-400
SM 421
24 VDC
ISOLATED
0.05 MS INPUT DELAY ALARM
DIAGNOSTICS
AC/DC/RELAY 14DI/10DO/2AI
SIMATIC S7-1200
CPU 1214C
compact CPU
AC/DC/relay
onboard I/O: 14 DI24 V DC
10 DO relay 2 A; 2 AI 0-10 V DC
power supply: AC 85-264 V AC at 47-63 Hz
program/data memory 150 KB
Digital output module
SIMATIC S7-300
Digital output SM 322
Isolated 16 DO
relay contacts
1x 20-pole
PCS 7 CPU410-5H F-S7-400/S7-400H/F/FH
SIMATIC PCS 7
2-4 AMP
5-24 VDC
DP INTERFACE: 90-150 MA
10 WATT POWER LOSS
450 MHZ CPU SPEED
2 X PROFINET INTERFACE
1 X PROFIBUS DP INTERFACE
2 X SYNC MODULE INTERFACE
Analog Output Module
SIMATIC DP
ELECTRONIC MODULE FOR ET 200S
2 AO U, 15MM WIDTH, +/-10 V
13 BIT + SIGN, 1..5V; 12BIT
CYCLE TIME < 1MS
WITH LED SF (GROUP FAULT)
ELECTRON MODULE
SIMATIC DP,1
ELECTRON. MODULE
FOR ET 200S
8 DO DC24V/0,5A
15 MM WIDTH,1
PIECE PER PACKAGING UNIT
PS405 Power Supply - 10 A
6ES74050KA020AA0
POWER SUPPLY
SIMATIC S7-400
PS 405/407
WIDE RANGE 10 AMP
24/48/60 VDC
5 VDC / 10 AMP
IM153-2 HF DP Slave Interface Module
SIMATIC DP
Connection ET 200M IM 153-2
High Feature for max.
12 S7-300 modules with redundancy capability
Timestamping suitable for isochronous mode
New features: up to 12 modules
can be used Slave INITIATIVE
for Drive ES and Switch ES
Expanded quantity structure for HART
auxiliary variables Operation of the
64-channel modules 32 signals/slot
CPU 313C Compact CPU with MPI
SIMATIC S7-300
CPU 313C
Compact CPU with MPI
24 DI/16 DO, 4 AI
2 AO, 1Pt100
3 high-speed counters (30 kHz)
Integr. power supply 24 V DC
workmemory 128 KB
Front connector (2x 40-pole)
Micro Memory Card required
CPU 226 Compact Unit
SIMATIC S7-200 CN
CPU 226 Compact device
AC power supply 24 DI DC/16 DO relay
16/24 KB progr./10 KB data
2 PPI/user-programmable interface
this S7-200 CN product
only has CE approval
SM 1231 Analog Input Module
SIMATIC S7-1200
Analog input, SM 1231
8 AI, +/-10 V, +/-5 V, +/-2.5 V
or 0-20mA/4-20 mA
12 bit+sign or (13 bit ADC)
Digital output module
SIMATIC S7-1500
digital output module
DQ 32x24V DC/0.5A HF
32 channels ingroups of 8
4 A per group; single-channel diagnostics
substitute value, switchingcycle counter for connected actuators
CENTRAL PROCESSING UNIT
6ES74163ER050AB0
CENTRAL PROCESSING UNIT
416-3 PN/DP
SIMATIC S7-400
11.2 MB
1ST INTERFACE MPI/DP 12 MBIT/S
2ND INTERFACE ETHERNET/PROFINET
3RD INTERFACE PLUG-IN IFM MODULE
Digital Output Module - Profisafe
6ES71384FB030AB0
DISCONTINUED BY MANUFACTURER
ELECTRONICS MODULE
ET200S
4 F-DO PROFISAFE
24 VDC
2 AMP
PROFINET
Tariff Code: 8538903000
Country of Origin: Germany
Terminal Module
SIMATIC DP
Terminal module
TM-P15C23-A0 for ET 200S for power modules
15 mm width, spring-type terminals (Cage Clamp)
2x3 terminal connections
with terminal access to AUX1
AUX1 interrupted
Analog input module
SIMATIC S7-300
Analog input SM 331
isolated, 2/3/4-wire, 8 AI
Resistor,Pt100/200/1000
NI100/120/200/500/1000, CU10
characteristics according toGOST 16 (internal 24) bit
50ms, 1x 40-pole
S7-400 Rack UR1
SIMATIC S7-400
rack UR1, central and
distributed with 18 slots
2 redundant PScan be plugged in
EM277 Profibus DP Module
SIMATIC S7-200
PROFIBUS DP Slave module
9.6 KB to 12 MB
1 interface PROFIBUS-DP/MPI
High Feature Interface Module
SIMATIC DP
ET 200M INTERFACE
IM 153-2 HIGH FEATURE FORMAX
8 S7-300 MODULES
WITH REDUNDANCY
TIMESTAMPING FIT
FOR ISOCHRONE MODE

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.