
CU240E-2 Control Unit
SINAMICS G120 CONTROL UNIT
CU240E-2 PN E-TYPE SAFETY INTEGRATED
STO PROFINET 6DI, 3DO, 2AI,
2AO, MAX 1F-DI PTC/KTY INTERFACE
USB- AND SD/MMC-INTERFACE PROTECTION
IP20 AMBIENT TEMP 0 TO +50
DEG C WITHOUT POWER MODULE AND PANEL
SCALANCE X216 Managed IE Switch
SCALANCE X216
MANAGED IE SWITCH
16 X 10/100MBIT/S RJ45 PORTS
LED DIAGNOSTICS,FAULT SIGNAL.
CONTACT WITH SET BUTTONREDUNDANT POWER SUPPLY
PROFINET-IO DEVICE,NETWORK- MANAGEMENT
INTEGRATED REDUNDANCY MANAGER
INCL. ELECTRONIC MANUAL ON CD
C-PLUG OPTIONAL
Analog Input Module
SIMATIC S7
analog input SM 331
isolated, 4 AE; 0/4 to 20 mA
1 x 20-pole, for
signals from the hazardous area
diagnostics-capable, PTB tested
CPU412-2 Central Processor Module
SIMATIC S7-400
CPU 412-2 CENTRAL PROCESSING UNIT
WITH:512 KB WORKING MEMORY
(256 KB CODE, 256 KB DATA)
1.INTERFACE MPI/DP 12 MBIT/S
2. INTERFACE PROFIBUS DP
Profibus Connector - 90 Degree
PROFIBUS bus connector
RS485, srew, with PG socket
90°SIMATIC DP
BUS CONNECTOR FOR PROFIBUS UP TO
12MBIT/S 90 DEGREE ANGLE CABLE OUTLET
TERMINAT. RESIST
WITH ISOLAT
FUNCTION, WITHPG SOCKET
SITOP Power Supply
SITOP MODULAR
24 V/20 ASITOP modular 20 A
Stabilized power supply
input: 3 AC 400-500
Voutput: 24 V DC/20 A
Input 3-phase AC
Rated voltage value Vin rated 400 ... 500 V
Voltage range AC 320 ... 550 V
Wide-range input Yes
Overvoltage resistance 2.3 × Vin rated, 1.3 ms
Mains buffering at Vin = 400 V
Mains buffering at Iout rated, min. 6 ms; at Vin = 400 V
TERMINAL MODULE
TERMINAL MODULE
SINAMICS
TM31 ADD ON BOARD
FOR SINAMICS WITH DIGITAL AND ANALOG IN- AND OUTPUTS
FOR CAP RAIL MOUNTING
IP20
CPU 1215C Compact CPU Unit
SIMATIC S7-1200
CPU 1215C, compact CPU
DC/DC/DC, 2 PROFINET
ports,onboard I/O: 14 DI 24 V DC
10 DO 24 V DC; 0.5 A; 2 AI 0-10 V DC, 2 AO 0-20 mADC
power supply: DC 20.4-28.8 V DC
program/data memory 200 KB
CPU 224XP Compact Unit
SIMATIC S7-200
CPU 224XP COMPACT UNIT
AC POWERSUPPLY 14DI DC/10DO RELAY
2AI, 1AO
12/16 KB CODE/10 KBDATA
2 PPI/FREEPORT PORTS
Digital Input Module
SIMATIC ET 200SP
DIGITAL INPUT MODULE
DI 16 X 24 V DC STANDARD
SUITABLE FOR BU TYPE A0
COLOR CODE CC00
MODULE DIAGNOSTICS
SUCCESSOR: 6ES7131-6BH01-0BA0
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.