PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7036-1EE85-1HA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7036-1EE85-1HA0 DC converter control board
Siemens 6SE7036-1EE85-1HA0 is a DC converter control board for the SIMOVERT MASTERDRIVES repair parts. It is used to coordinates converter switching commands. Confirm the complete article number, installed drive, electrical class, interfaces and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete DC converter control board
ACTUAL APPLICATIONS
Application context for 6SE7036-1EE85-1HA0
Manufacturer documentation places the Dc Converter Control Board in practical drive applications. The three cases below describe different operating tasks in which 6SE7036-1EE85-1HA0 performs its documented product-family role with the configured companion equipment.
-
01 · OIL & GAS
Verify loading-pump operation during transfer-rate adjustment
Inside the transfer pumps, flow meters and loading headers, 6SE7036-1EE85-1HA0 serves its documented function as a Dc Converter Control Board. During transfer-rate adjustment, the system uses this function to regulate pump speed from the transfer target, helping it keep product flow inside the agreed operating range. -
02 · AUTOMOTIVE
Control paint-shop conveying with Dc Converter
Across the carrier tracking and booth interfaces, 6SE7036-1EE85-1HA0 provides its specified system function as a Dc Converter Control Board. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process. -
03 · PLASTICS & PACKAGING
Track web transport with Dc Converter process control
During operation of the unwinders, dancers and pull rolls, 6SE7036-1EE85-1HA0 supports the configured automation role as a Dc Converter Control Board. During format change, the system uses this function to synchronize the driven sections with product position, helping it protect web tension and print registration.
Technical specifications for 6SE7036-1EE85-1HA0
-
Product Model6SE7036-1EE85-1HA0
-
Product ParametersDC converter control board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassDC converter control board
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionCoordinates converter switching commands
-
Power ArchitectureSIMODRIVE DC control stage
-
Voltage ClassEquipment-nameplate voltage class
-
Current RatingSignal-level current channels
-
Control Supply24 V DC control circuit
-
Power SectionConverter electronics compartment
-
Mechanical DesignPlug-in control-board format
-
Electrical InterfaceC98043-A1682-L1 board interface
-
Cooling IntegrationNatural cabinet air path
-
Board Designation6SE7036-1EE85-1HA0 module
-
Service RoleExact-article replacement item
-
Product StatusDiscontinued drive spare
-
Commissioning CheckConfirm mating board and revision
View all additional
Alternative Names
6SE7036 1EE85 1HA0
SIMOVERT MASTERDRIVES repair parts DC converter control board
Siemens DC converter control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7036-1EE85-1HA0 to the installed SIMOVERT MASTERDRIVES repair parts
Siemens 6SE7036-1EE85-1HA0 is a DC converter control board used in the SIMOVERT MASTERDRIVES repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SE7036-1EE85-1HA0
- Product class: DC converter control board
- Family: SIMOVERT MASTERDRIVES repair parts
The Siemens 6SE7036-1EE85-1HA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7036-1EE85-1HA0 identity before exchange
Replace 6SE7036-1EE85-1HA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SE7036-1EE85-1HA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SE7036-1EE85-1HA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7036-1EE85-1HA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7036-1EE85-1HA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26.3 × 12.5 × 2.5 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7036-1EE85-1HA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 6SE7036-1EE85-1HA0 a complete power converter?
No. It is a DC converter control-board assembly used within a documented SIMOVERT configuration. -
Which companion board marking should be recorded?
Record C98043-A1682-L1 when it appears on the fitted circuit board, together with the full 6SE7036 module number. -
What must match before transferring the plug-in controller?
The converter type, equipment voltage, board revision, connector keying and parameter backup must all be confirmed. -
Why should the 24 V control circuit be measured first?
A low or unstable auxiliary supply can imitate a failed controller and can corrupt the start-up sequence. -
How are the DC-drive commands preserved during exchange?
Label every command and feedback plug, save available settings and photograph the original routing before removal. -
Can the control board be tested with the power stage energised?
Testing must follow the approved Siemens and site procedure because hazardous converter voltages can remain present. -
What indicates incorrect mating after installation?
Unexpected status indications, absent feedback or immediate converter faults can point to a mis-keyed or poorly seated connection. -
Which commissioning record is needed for 6SE7036-1EE85-1HA0?
Record auxiliary voltage, board identity, diagnostic status and the result of the controlled DC-drive function test.
READY TO VERIFY YOUR PART?
Get a 6SE7036-1EE85-1HA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
