PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7037-0EJ84-1JC2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7037-0EJ84-1JC2 IGD7 inverter control module
Siemens 6SE7037-0EJ84-1JC2 is a IGD7 inverter control module for the SIMOVERT MASTERDRIVES repair parts. It is used to controls inverter semiconductor firing. Confirm the complete article number, installed drive, electrical class, interfaces and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete IGD7 inverter control module
ACTUAL APPLICATIONS
Application context for 6SE7037-0EJ84-1JC2
Manufacturer documentation places the Igd7 Inverter Control Module in practical drive applications. The three cases below describe different operating tasks in which 6SE7037-0EJ84-1JC2 performs its documented product-family role with the configured companion equipment.
-
01 · PLASTICS & PACKAGING
Sequence form-fill-seal during speed ramp process control
During operation of the film feed, sealing jaws and discharge belts, 6SE7037-0EJ84-1JC2 supports the configured automation role as a Igd7 Inverter Control Module. During speed ramp, the system uses this function to correct material position before sealing or cutting, helping it keep seals and cuts aligned with the product. -
02 · MINING & METALS
Stabilize crane motion with Igd7 Inverter process control
Across the hoists, trolleys and travel drives, 6SE7037-0EJ84-1JC2 supports the configured automation role as a Igd7 Inverter Control Module. During positioning approach, the system uses this function to shape acceleration and braking around the commanded move, helping it place the load without excessive swing. -
03 · OIL & GAS
Track cooling-fan control with Igd7 Inverter process control
In the automation chain for the air coolers, fan motors and temperature feedback, 6SE7037-0EJ84-1JC2 supports the configured automation role as a Igd7 Inverter Control Module. During ambient-load change, the system uses this function to trim fan speed to the measured cooling requirement, helping it hold outlet temperature without unnecessary fan power.
Technical specifications for 6SE7037-0EJ84-1JC2
-
Product Model6SE7037-0EJ84-1JC2
-
Product ParametersIGD7 inverter control module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD7 control module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionControls inverter semiconductor firing
-
Power ArchitectureThree-phase inverter gate stage
-
Voltage Class380–460 V AC equipment
-
Current Rating690 A device class
-
Control Supply510–620 V DC link
-
Power SectionIGD7 power-control section
-
Mechanical DesignPlug-in industrial module
-
Electrical InterfaceInternal gate-control connectors
-
Cooling IntegrationConverter cabinet cooling
-
Board Designation6SE7037-0EJ84-1JC2 IGD7
-
Service RoleHigh-current inverter spare
-
Product StatusLegacy service component
-
Commissioning CheckVerify DC-link and current class
View all additional
Alternative Names
6SE7037 0EJ84 1JC2
SIMOVERT MASTERDRIVES repair parts IGD7 inverter control module
Siemens IGD7 inverter control module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7037-0EJ84-1JC2 to the installed SIMOVERT MASTERDRIVES repair parts
Siemens 6SE7037-0EJ84-1JC2 is a IGD7 inverter control module used in the SIMOVERT MASTERDRIVES repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SE7037-0EJ84-1JC2
- Product class: IGD7 inverter control module
- Family: SIMOVERT MASTERDRIVES repair parts
The Siemens 6SE7037-0EJ84-1JC2 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7037-0EJ84-1JC2 identity before exchange
Replace 6SE7037-0EJ84-1JC2 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SE7037-0EJ84-1JC2 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SE7037-0EJ84-1JC2 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7037-0EJ84-1JC2
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7037-0EJ84-1JC2 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size34.5 × 10 × 3 cm
-
Shipping weight0.22 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7037-0EJ84-1JC2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What equipment range is stated for the IGD7 module?
It is identified for 380–460 V three-phase equipment with a 510–620 V DC-link environment. -
Where is the 690 A class relevant on 6SE7037-0EJ84-1JC2?
It identifies the high-current inverter section that must match the installed power devices and drive rating. -
What is the purpose of the IGD7 electronics?
The module produces and supervises firing commands for the converter semiconductor stage. -
Which measurements are required before removing the controller?
Record the DC-link state, auxiliary supplies and fault history after placing the equipment in a safe isolated condition. -
How can a wrong IGD generation be detected?
Compare the full 6SE code, board marking, connector count and mechanical keying rather than relying on enclosure appearance. -
What should be inspected around a failed 690 A channel?
Check semiconductor condition, gate wiring, snubber components, cooling contact and evidence of overtemperature. -
Why must the DC link be discharged before board work?
The 510–620 V circuit can retain hazardous energy after mains isolation and requires verified discharge. -
What proves the IGD7 repair is complete?
Stable diagnostics, correct gate-channel response and a monitored low-risk motor test must all be documented.
READY TO VERIFY YOUR PART?
Get a 6SE7037-0EJ84-1JC2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
