PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7038-6GK84-1JC2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7038-6GK84-1JC2 Inverter control interface module
Siemens 6SE7038-6GK84-1JC2 is a Inverter control interface module used in the SIMOVERT MASTERDRIVES. It controls a high-power inverter stage and evaluates its feedback and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 660–690 V AC, Drive-defined high-current class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 660–690 V AC, Drive-defined high-current class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Inverter control interface module
ACTUAL APPLICATIONS
Application context for 6SE7038-6GK84-1JC2
Manufacturer documentation places the Inverter Control Interface Module in practical network applications. The three cases below describe different operating tasks in which 6SE7038-6GK84-1JC2 performs its documented product-family role with the configured companion equipment.
-
01 · INFORMATION TECHNOLOGY
Synchronize machine-data collection during diagnostic polling
Across the machine gateways and production databases, 6SE7038-6GK84-1JC2 operates in its approved product-family role as a Inverter Control Interface Module. During diagnostic polling, the system uses this function to separate production data from time-critical control messages, helping it deliver operating records without disturbing control traffic. -
02 · FOOD & BEVERAGE
Control recipe-server exchange with Inverter Control
As part of the batch controllers, HMIs and recipe servers, 6SE7038-6GK84-1JC2 supports the configured automation role as a Inverter Control Interface Module. During recipe download, the system uses this function to deliver the approved recipe data to the production cell, helping it start the batch with the intended process parameters. -
03 · WATER & WASTEWATER
Align plant-data uplink during scheduled data collection
For the coordinated operation of the control servers, historians and reporting systems, 6SE7038-6GK84-1JC2 operates in its approved product-family role as a Inverter Control Interface Module. During scheduled data collection, the system uses this function to separate reporting traffic from the control network, helping it deliver operating records without delaying control messages.
Technical specifications for 6SE7038-6GK84-1JC2
-
Product Model6SE7038-6GK84-1JC2
-
Product ParametersInverter control interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassInverter control interface module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionControls a high-power inverter stage and evaluates its feedback
-
Power ArchitectureHigh-voltage inverter electronics
-
Voltage Class660–690 V AC
-
Current RatingDrive-defined high-current class
-
Power SectionInverter power section
-
Mechanical DesignPlug-in control module
-
Electrical InterfaceGate, current and DC-link connectors
-
Commissioning CheckCheck insulation, phase gates and diagnostics
View all additional
Alternative Names
6SE7038 6GK84 1JC2
SIMOVERT MASTERDRIVES Inverter control interface module
Siemens high-power GK84 module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7038-6GK84-1JC2 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7038-6GK84-1JC2 is an Inverter control interface module used in the SIMOVERT MASTERDRIVES to control a high-power inverter stage and evaluates its feedback. Its high-voltage inverter electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 660–690 V AC, Drive-defined high-current class, the inverter power section, plug-in control module and gate, current and dc-link connectors. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete check insulation, phase gates and diagnostics, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7038-6GK84-1JC2
- Function: Controls a high-power inverter stage and evaluates its feedback
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7038-6GK84-1JC2 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7038-6GK84-1JC2 identity before exchange
Treat 6SE7038-6GK84-1JC2 as a configuration-specific Inverter control interface module for the SIMOVERT MASTERDRIVES. Match the complete Siemens article number, installed inverter power section, board or module revision, mechanical design and approved replacement record before removal.
Photograph gate, current and dc-link connectors, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in control module and any cooling or discharge provisions while the drive is isolated.
After installation, check insulation, phase gates and diagnostics. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SE7038-6GK84-1JC2
- Installed section: Inverter power section
- Release check: Check insulation, phase gates and diagnostics
The Siemens 6SE7038-6GK84-1JC2 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SE7038-6GK84-1JC2
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7038-6GK84-1JC2 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size36 × 25 × 5 cm
-
Shipping weight0.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7038-6GK84-1JC2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is the high-power inverter control function used?
6SE7038-6GK84-1JC2 performs controls a high-power inverter stage and evaluates its feedback in the documented SIMOVERT MASTERDRIVES; first confirm the installed inverter power section. -
Which electrical identity defines the high-power GK84 module?
Compare 6SE7038-6GK84-1JC2, 660–690 V AC, Drive-defined high-current class and the installed drive nameplate with Siemens documentation. -
What must match before phase-current feedback work begins?
Confirm the plug-in control module, connector keys, controlled hardware position and complete 6SE7038-6GK84-1JC2 suffix. -
Which connections belong to the high-power GK84 module?
Record gate, current and dc-link connectors, cable labels, grounding, adjacent assemblies and board orientation before removal. -
How should the high-power inverter control assembly be isolated?
Apply site lockout, wait the specified discharge time, prove absence of voltage and use ESD controls before handling 6SE7038-6GK84-1JC2. -
What receiving inspection applies to 6SE7038-6GK84-1JC2?
Check the article label, suffix, connectors, coating, mechanical condition, contamination and protective packing. -
Which result completes the GK84 diagnostic release?
Check insulation, phase gates and diagnostics. Record diagnostics and the controlled functional test before release. -
What details are needed to quote the high-power GK84 module?
Send the full 6SE7038-6GK84-1JC2 label, installed inverter power section, interface photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a 6SE7038-6GK84-1JC2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
