PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7041-8GK85-0LA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7041-8GK85-0LA0 Parallel connection interface module
Siemens 6SE7041-8GK85-0LA0 is a Parallel connection interface module in the Siemens SIMOVERT. It is used to connect compatible components and transfer the specified control or signal data.
Its documented configuration includes component class of Parallel connection module, drive family of SIMOVERT MASTERDRIVES, primary function of Couples parallel infeed units, and power architecture of Multi-unit line-side interface. During operation, the Parallel connection interface module performs its assigned Parallel connection interface module function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of Parallel connection module, drive family of SIMOVERT MASTERDRIVES, primary function of Couples parallel infeed units, and power architecture of Multi-unit line-side interface. During operation, the Parallel connection interface module performs its assigned Parallel connection interface module function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete Parallel connection interface module
ACTUAL APPLICATIONS
Where 6SE7041-8GK85-0LA0 Fits Across Major Industry Sectors
Uses span paper, logistics and water, subject to verified compatibility, operating conditions and project requirements.
-
01 · PULP & PAPER
Paper Manufacturing, Tissue Production and Paper Converting
Paper production, finishing and converting for commercial paper products.Tissue and napkin manufacturing for everyday consumer paper products. -
02 · TRANSPORT & LOGISTICS
Rail Freight Handling and Industrial Lifting Operations
Rail freight transportation and cargo handling within logistics operations.Industrial material handling and lifting for goods movement operations. -
03 · WATER & WASTEWATER
Drinking Water Supply and Municipal Wastewater Treatment
Drinking water treatment and supply for municipal utility services.Municipal wastewater treatment and sanitation for urban service areas.
Technical specifications for 6SE7041-8GK85-0LA0
-
Product Model6SE7041-8GK85-0LA0
-
Product ParametersParallel connection interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassParallel connection module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionCouples parallel infeed units
-
Power ArchitectureMulti-unit line-side interface
-
Voltage Class500–575 / 660–690 V AC
-
Current Rating850 A application class
-
Control SupplyInternal converter auxiliary power
-
Power SectionParallel infeed section
-
Mechanical DesignOpen-frame interface board
-
Electrical InterfacePaired unit synchronization links
-
Cooling IntegrationCabinet-forced air environment
-
Board Designation6SE7041-8GK85-0LA0 board
-
Service RoleHigh-voltage parallel spare
-
Product StatusLegacy Siemens module
-
Commissioning CheckCheck phase sequence and balance
View all additional
Alternative Names
6SE7041 8GK85 0LA0
SIMOVERT MASTERDRIVES Parallel connection interface module
Siemens Parallel connection interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7041-8GK85-0LA0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7041-8GK85-0LA0 is a Parallel connection interface module used in the SIMOVERT MASTERDRIVES.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SE7041-8GK85-0LA0
- Product class: Parallel connection interface module
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7041-8GK85-0LA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7041-8GK85-0LA0 identity before exchange
Replace 6SE7041-8GK85-0LA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SE7041-8GK85-0LA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SE7041-8GK85-0LA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7041-8GK85-0LA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7041-8GK85-0LA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size36.5 × 28.5 × 3.5 cm
-
Shipping weight0.7 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7041-8GK85-0LA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Why is 6SE7041-8GK85-0LA0 used between parallel units?
It provides the interface needed to coordinate compatible SIMOVERT infeed units operating in parallel. -
Which voltage classes are associated with the 8GK code?
Confirm either the documented 500–575 V or 660–690 V three-phase equipment class. -
What does the 850 A application class require?
Busbars, upstream protection, cables and both infeed units must be checked for the same approved current arrangement. -
How is phase order protected during replacement?
Label all three phases and synchronization connections and compare them with the original wiring record. -
What can cause unequal current sharing after installation?
Mismatched unit settings, connection resistance, phase errors or an incorrect interface can create imbalance. -
Can one side of the parallel system remain unidentified?
No. Record both converter article numbers and their power-section ratings before selecting this module. -
Which mechanical details matter on the 0LA0 board?
Verify connector orientation, mounting points, clearances and the exact board designation printed on the assembly. -
What test confirms successful parallel coupling?
Measure stable current sharing at a controlled load and confirm that neither infeed unit reports synchronization faults.
READY TO VERIFY YOUR PART?
Get a 6SE7041-8GK85-0LA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6SE7041-8GK85-0LA0Parallel connection interface moduleManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
