PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7090-0XX85-1DA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7090-0XX85-1DA0 MASTERDRIVES control electronics module
Siemens 6SE7090-0XX85-1DA0 is a MASTERDRIVES control electronics module used in the SIMOVERT MASTERDRIVES. It executes closed-loop converter control and system diagnostics and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC electronics, Signal-level control load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC electronics, Signal-level control load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete MASTERDRIVES control electronics module
ACTUAL APPLICATIONS
Where 6SE7090-0XX85-1DA0 Fits in Textiles, Metalworking And Printing
Textiles, metalworking and printing uses depend on installation compatibility, operating conditions and project requirements.
-
01 · TEXTILE MANUFACTURING
Synthetic Fiber Manufacturing and Industrial Tire Cord Production
Manmade fiber production and processing within the textile industry.Tire cord manufacturing for industrial textile and reinforcement products. -
02 · METALS & WIRE
Metal Rolling Mills and Wire Production Facilities
Metal processing and rolling for industrial materials manufacturing operations.Wire and cable production within the metal processing industry. -
03 · PRINTING & PACKAGING
Commercial Printing Facilities and Industrial Packaging Production
Commercial printing and production of printed materials for businesses.Industrial product packaging and packing across manufacturing production processes.
Technical specifications for 6SE7090-0XX85-1DA0
-
Product Model6SE7090-0XX85-1DA0
-
Spare ModelC98043-A1680-L1
-
Product ParametersMASTERDRIVES control electronics module
-
In stock1 unit
-
Estimated Shipping Size1.5x12.5x26.4cm
-
ManufacturerSiemens
-
Weight0.2 kg
-
Component ClassMASTERDRIVES control electronics module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionExecutes closed-loop converter control and system diagnostics
-
Power ArchitectureDigital control-unit platform
-
Voltage Class24 V DC electronics
-
Current RatingSignal-level control load
-
Power SectionConverter electronics section
-
Mechanical DesignPlug-in control module
-
Electrical InterfaceBus, I/O and feedback connectors
-
Commissioning CheckRestore parameters and test control loops
View all additional
Alternative Names
6SE7090 0XX85 1DA0
SIMOVERT MASTERDRIVES MASTERDRIVES control electronics module
Siemens MASTERDRIVES control module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7090-0XX85-1DA0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7090-0XX85-1DA0 is a MASTERDRIVES control electronics module used in the SIMOVERT MASTERDRIVES to execute closed-loop converter control and system diagnostics. Its digital control-unit platform role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC electronics, Signal-level control load, the converter electronics section, plug-in control module and bus, i/o and feedback connectors. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete restore parameters and test control loops, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7090-0XX85-1DA0
- Function: Executes closed-loop converter control and system diagnostics
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7090-0XX85-1DA0 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7090-0XX85-1DA0 identity before exchange
Treat 6SE7090-0XX85-1DA0 as a configuration-specific MASTERDRIVES control electronics module for the SIMOVERT MASTERDRIVES. Match the complete Siemens article number, installed converter electronics section, board or module revision, mechanical design and approved replacement record before removal.
Photograph bus, i/o and feedback connectors, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in control module and any cooling or discharge provisions while the drive is isolated.
After installation, restore parameters and test control loops. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SE7090-0XX85-1DA0
- Installed section: Converter electronics section
- Release check: Restore parameters and test control loops
The Siemens 6SE7090-0XX85-1DA0 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Technical values prepared for 6SE7090-0XX85-1DA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7090-0XX85-1DA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 22 × 5 cm
-
Shipping weight0.7 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7090-0XX85-1DA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which service task calls for 6SE7090-0XX85-1DA0 for closed-loop drive control in SIMOVERT MASTERDRIVES?
Use 6SE7090-0XX85-1DA0 only for executes closed-loop converter control and system diagnostics in the documented SIMOVERT MASTERDRIVES. Engineering must confirm the installed converter electronics section, 24 V DC electronics and controlled drawing before work. -
What symptoms should maintenance record before blaming 6SE7090-0XX85-1DA0 for a parameter data transfer fault?
For 6SE7090-0XX85-1DA0, review drive alarms, DC-link or supply readings, command status, bus, i/o and feedback connectors and the physical condition of the MASTERDRIVES control module. Compare results with a known-good channel where the site procedure permits. -
What must engineers capture before removing 6SE7090-0XX85-1DA0 from the converter electronics section?
Before removing 6SE7090-0XX85-1DA0, save parameters where applicable and photograph the plug-in control module, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
Which post-replacement tests release the MASTERDRIVES control module back to service?
After installation, restore parameters and test control loops. Maintenance should then review diagnostics, prove the control-loop validation under controlled conditions and record the final result before production release. -
How can sourcing verify 6SE7090-0XX85-1DA0 as the correct MASTERDRIVES control module?
Match the complete 6SE7090-0XX85-1DA0 article, MASTERDRIVES control module, 24 V DC electronics, Signal-level control load, hardware suffix and installed SIMOVERT MASTERDRIVES configuration. A similar appearance or shortened article number is insufficient. -
What should a distributor disclose about the condition and revision of 6SE7090-0XX85-1DA0?
The offer for 6SE7090-0XX85-1DA0 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
What stock, dispatch and packing information does a buyer need for the MASTERDRIVES control module?
For 6SE7090-0XX85-1DA0, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
What paperwork should procurement request with the MASTERDRIVES control module?
A 6SE7090-0XX85-1DA0 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a 6SE7090-0XX85-1DA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
