PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7090-0XX84-0AH2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7090-0XX84-0AH2 T300 technology board
Siemens 6SE7090-0XX84-0AH2 is a T300 technology board used in the SIMOVERT MASTERDRIVES. It adds configurable technology functions to the drive and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC electronics, Signal-level I/O, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC electronics, Signal-level I/O, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete T300 technology board
ACTUAL APPLICATIONS
Application context for 6SE7090-0XX84-0AH2
Manufacturer documentation places the T300 Technology Board in practical drive applications. The three cases below describe different operating tasks in which 6SE7090-0XX84-0AH2 performs its documented product-family role with the configured companion equipment.
-
01 · PLASTICS & PACKAGING
Control form-fill-seal with T300 Technology process control
During operation of the film feed, sealing jaws and discharge belts, 6SE7090-0XX84-0AH2 handles its designated signal or control duty as a T300 Technology Board. During speed ramp, the system uses this function to correct material position before sealing or cutting, helping it keep seals and cuts aligned with the product. -
02 · WATER & WASTEWATER
Manage high-lift pump speed during demand increase
During operation of the pump motors, discharge headers and pressure loops, 6SE7090-0XX84-0AH2 performs its assigned control role as a T300 Technology Board. During demand increase, the system uses this function to adjust motor speed from the process demand signal, helping it maintain the required pressure with less throttling. -
03 · MINING & METALS
Synchronize rolling-mill coordination with T300 Technology
At the control layer of the mill stands and cooling sections, 6SE7090-0XX84-0AH2 serves its documented function as a T300 Technology Board. During load transition, the system uses this function to coordinate material handoff with the active production pass, helping it hold the rolling sequence inside its process window.
Technical specifications for 6SE7090-0XX84-0AH2
-
Product Model6SE7090-0XX84-0AH2
-
Product ParametersT300 technology board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassT300 technology board
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionAdds configurable technology functions to the drive
-
Power ArchitectureT300 hardware platform
-
Voltage Class24 V DC electronics
-
Current RatingSignal-level I/O
-
Power SectionTechnology option slot
-
Mechanical DesignPlug-in technology board
-
Electrical Interface16 DI, 8 DO, analog and serial interfaces
-
Commissioning CheckLoad approved configuration and test technology I/O
View all additional
Alternative Names
6SE7090 0XX84 0AH2
SIMOVERT MASTERDRIVES T300 technology board
Siemens T300 spare board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7090-0XX84-0AH2 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7090-0XX84-0AH2 is a T300 technology board used in the SIMOVERT MASTERDRIVES to add configurable technology functions to the drive. Its t300 hardware platform role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC electronics, Signal-level I/O, the technology option slot, plug-in technology board and 16 di, 8 do, analog and serial interfaces. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete load approved configuration and test technology i/o, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7090-0XX84-0AH2
- Function: Adds configurable technology functions to the drive
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7090-0XX84-0AH2 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7090-0XX84-0AH2 identity before exchange
Treat 6SE7090-0XX84-0AH2 as a configuration-specific T300 technology board for the SIMOVERT MASTERDRIVES. Match the complete Siemens article number, installed technology option slot, board or module revision, mechanical design and approved replacement record before removal.
Photograph 16 di, 8 do, analog and serial interfaces, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in technology board and any cooling or discharge provisions while the drive is isolated.
After installation, load approved configuration and test technology i/o. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SE7090-0XX84-0AH2
- Installed section: Technology option slot
- Release check: Load approved configuration and test technology I/O
The Siemens 6SE7090-0XX84-0AH2 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SE7090-0XX84-0AH2
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7090-0XX84-0AH2 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 40 × 30 cm
-
Shipping weight2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7090-0XX84-0AH2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which documented task requires the T300 spare board?
6SE7090-0XX84-0AH2 is applied to adds configurable technology functions to the drive in the SIMOVERT MASTERDRIVES; verify the installed technology option slot first. -
How is the 24 V DC electronics class checked for the T300 spare board?
Compare the complete 6SE7090-0XX84-0AH2 identifier, drive nameplate, DC-link or supply data and the applicable Siemens manual. -
What distinguishes the T300 technology logic configuration?
Match Signal-level I/O, plug-in technology board and the controlled hardware arrangement rather than appearance alone. -
Which records preserve the mixed I/O validation setup?
Photograph 16 di, 8 do, analog and serial interfaces, connector keys, cable labels, grounding, adjacent parts and revision before removing 6SE7090-0XX84-0AH2. -
What isolation step protects the T300 spare board?
Apply site lockout, wait the Siemens discharge time, prove absence of voltage and use ESD controls before handling 6SE7090-0XX84-0AH2. -
What arrival inspection applies to T300 technology logic?
Check the 6SE7090-0XX84-0AH2 label, suffix, connectors, coating, mechanical damage, contamination and protective packing before installation. -
How is the memory-submodule check result accepted?
Load approved configuration and test technology I/O. Record diagnostics and the controlled functional result before release. -
What quotation details identify the T300 spare board?
Send the full 6SE7090-0XX84-0AH2 label, installed technology option slot, interface photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a 6SE7090-0XX84-0AH2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
