PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- C98043-A7109-L100
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A7109-L100 Optocoupled power interface board
Siemens C98043-A7109-L100 is a Optocoupled power interface board for the SINAMICS DCM. It is used to routes isolated firing signals. Confirm the exact article, electrical class, interfaces, companion hardware and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete Optocoupled power interface board
ACTUAL APPLICATIONS
Application context for C98043-A7109-L100
Manufacturer documentation places the Optocoupled Power Interface Board in practical drive applications. The three cases below describe different operating tasks in which C98043-A7109-L100 performs its documented product-family role with the configured companion equipment.
-
01 · OIL & GAS
Observe compressor auxiliary drives with Optocoupled Power
Across the lube-oil pumps, seal systems and ventilation motors, C98043-A7109-L100 provides its specified system function as a Optocoupled Power Interface Board. During compressor start, the system uses this function to sequence auxiliary motor operation around train readiness, helping it establish the support systems before process loading. -
02 · WATER & WASTEWATER
Track sludge-pump control with Optocoupled Power
Across the positive-displacement pumps and flow feedback, C98043-A7109-L100 serves its documented function as a Optocoupled Power Interface Board. During solids-loading change, the system uses this function to hold the commanded feed rate as process load changes, helping it keep sludge transfer stable. -
03 · AUTOMOTIVE
Route powertrain assembly with Optocoupled Power
Within the machining cells and pallet systems, C98043-A7109-L100 supports the configured automation role as a Optocoupled Power Interface Board. During quality-hold release, the system uses this function to hand off part identity with the machine sequence, helping it retain traceability at the next operation.
Technical specifications for C98043-A7109-L100
-
Product ModelC98043-A7109-L100
-
Product ParametersOptocoupled power interface board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassOptocoupled power interface board
-
Drive FamilySINAMICS DCM
-
Primary FunctionRoutes isolated firing signals
-
Power ArchitectureOPTO and IGBT driver stage
-
Voltage Class3.3–24 V DC logic
-
Current Rating2.5–8 kHz PWM range
-
Control Supply±15 V DC electronics
-
Power SectionDC converter gate interface
-
Mechanical DesignCoated board assembly
-
Electrical Interface6RY1803-0CM20 connection set
-
Cooling IntegrationNatural cabinet airflow
-
Board DesignationC98043-A7109-L100 board
-
Service Role0CM20 companion board
-
Product StatusSiemens service component
-
Commissioning CheckVerify 4 kV basic isolation
View all additional
Alternative Names
C98043 A7109 L100
SINAMICS DCM Optocoupled power interface board
Siemens Optocoupled power interface board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match C98043-A7109-L100 to the installed SINAMICS DCM
Siemens C98043-A7109-L100 is a Optocoupled power interface board used in the SINAMICS DCM.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: C98043-A7109-L100
- Product class: Optocoupled power interface board
- Family: SINAMICS DCM
The Siemens C98043-A7109-L100 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete C98043-A7109-L100 identity before exchange
Replace C98043-A7109-L100 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact C98043-A7109-L100 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens C98043-A7109-L100 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for C98043-A7109-L100
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens C98043-A7109-L100 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26 × 23 × 3.5 cm
-
Shipping weight0.82 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginAustria
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A7109-L100
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is distinctive about the A7109 optocoupler board?
The A7109 optocoupler board is used in the documented SINAMICS DCM configuration for routes isolated firing signals. -
Which installation matches 2.5–8 kHz PWM for the A7109 optocoupler board?
For the A7109 optocoupler board, match 3.3–24 V DC logic and 2.5–8 kHz PWM range to the installed equipment nameplate. -
How does the module routes isolated firing signals for the A7109 optocoupler board?
The A7109 optocoupler board performs routes isolated firing signals through the opto and igbt driver stage. -
What record is needed for A7109-L100 board for the A7109 optocoupler board?
For the A7109 optocoupler board, record C98043-A7109-L100 board together with the complete article and installed revision. -
Which connection risk affects 6ry1803-0cm20 connection set for the A7109 optocoupler board?
On the A7109 optocoupler board, inspect 6ry1803-0cm20 connection set for keying, damage, contamination, routing and secure seating. -
How is ±15 v dc electronics checked under load for the A7109 optocoupler board?
Before energizing the A7109 optocoupler board, measure ±15 v dc electronics and confirm the documented polarity or phase condition. -
What companion hardware must agree for the A7109 optocoupler board?
A A7109 optocoupler board replacement must match its electrical class, section role, companion hardware and mechanical interface. -
How is the repaired section validated for the A7109 optocoupler board?
For the A7109 optocoupler board, verify 4 kv basic isolation; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a C98043-A7109-L100 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
